Hampshire · England
Remedial Sealant in Firgo
Failed sealant joints in Firgo need attention? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- A second bead peeling off the first
- Movement joints that have split or pulled away
- Wide, uneven beads that look worse than the old ones
Landlords, agents and businesses in Firgo
We also work for property managers and facilities teams. Several sites can go on one quote, and we are fully insured.
Hotels need rooms back in use, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.
About our remedial sealant in Firgo
With more than 20 years’ experience, our applicators have seen most of the ways sealant can fail. We are ARBOMaster approved and fully insured, and every remedial job comes with a 12-month guarantee. We work on expansion joints, failed movement joints and mouldy bath & shower sealant, and common reasons people get in touch are kitchen joints letting water behind the worktop and thick, messy sealant smeared over tiles.
Around Firgo, it’s houses and cottages rather than flats. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
The work is covered for a year after we finish. If anything isn’t right with it, call 0345 464 0079 or send us an email.
- Place
- Firgo (RG28)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Towns and villages near Firgo
Other services in Firgo
How it works
Most of a good job is in the preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. In total, it generally takes a few hours for most joints, depending on how much old sealant has to come out. In a small place like Firgo, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We protect the surfaces around the joint.
- Every layer of failed sealant is stripped out.
- The joint is degreased and checked for movement and leaks.
- Once dry, a suitable sealant is applied and tooled.
- We give you the cure time and explain what caused the failure.
How to prepare
- Tell us if parking is tricky
- Let us know if you’ve seen damp or leaks
- Clear the area around the work
Get a quote
We quote each job on its own, so the first step is telling us about yours. Just ring 0345 464 0079 or drop us an email with the details, and photos are welcome.
Related advice
Honest limits
A few problems are outside what sealant work can do:
- Movement from fittings that aren’t supported
- Plumbing leaks behind walls or under trays
- Failed tanking or loose tiles behind the sealant
If you’re not sure, just phone 0345 464 0079 or drop us an email and we’ll give you a straight answer before booking.
Where we work in Firgo
- Expansion joints
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Failed movement joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
Quotes for remedial sealant in Firgo
We do not publish a price list, because no two jobs are the same. The quote depends on:
- Which sealant suits the joint
- Whether the work is at height
- The amount of work
- Mould in or behind the old joints
A failed joint rarely gets cheaper to fix by waiting. If you are unsure, ring 0345 464 0079 or email us for an honest opinion and a quote.
What we need to know
When you contact us, it’s useful to know:
- A few photos by email, if you can
- How we’d reach the joints
- Roughly how big the job is
- If someone has resealed it before
Getting a quote is simple: let us know what needs doing and where and its rough size. Photos by email help us understand the job, and we will come back to you with a quote.
Keeping the joints in good condition
So the new joints stay in good condition:
- Don’t add new sealant on top of old
- Check trays and worktops don’t move
- Do not point over movement joints
- Act on a lifting corner straight away
If the joint ever needs renewing, have it cut out, not sealed over. New silicone doesn’t bond to old, so the old bead should always come out first.
Mould trapped under over-sealed joints spreads unseen. When it finally shows, the whole bead needs to come out.
Why act early in Firgo
Spraying mould remover on a sealed-over joint doesn’t reach what’s underneath. Removal is the only way to get at it. Around Firgo, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we’ll explain what it covers.
Why us?
- Quality sealants from Arbo and Everbuild
- 4.9 on Google from 180+ five-star reviews
- Anti-fungal silicone where joints get wet
- An ARBOMaster approved applicator
See what affects the cost and what customers say.
Common questions in Firgo
Is Firgo in your area for remedial sealant?
Yes, Firgo is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or email us with a few details of the job.
Do you work for landlords with property near Whitchurch (Hampshire) station?
Yes, landlords and agents are among the people we work for. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we’ll give you a clear quote.
Are you ARBOMaster approved?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Can you strip sealant from an acrylic tray safely?
Yes. Residue is removed with a product suited to the surface rather than scraped hard, so the new sealant bonds cleanly.
Someone resealed my shower and it’s leaking again. Can you help?
Yes. All the sealant comes out, we find out why it failed, and the joint is resealed properly.
Do you guarantee remedial jobs?
Yes, with our one-year guarantee. If we’ve pointed out another problem, getting it fixed helps the new joint last.
Will the old sealant be removed?
Yes. Sealing over old sealant is the main reason resealing fails early, so we never do it.
What does remedial sealant cost?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. You’ll get a clear quote before we start.
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
What remedial sealant looks like in Firgo
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Schools such as Testbourne Community School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. For an older house near a landmark such as Church of St Mary, walls and floors in older homes can move, and sealant and grout show it first. If you let a flat or house near Whitchurch (Hampshire) station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Firgo is about 6 miles east of Andover, in Hampshire. Every kind of property in Firgo is covered for remedial sealant. The work is guaranteed for a year. Across Hampshire, we cover 683 places, and Firgo is one of them. Our Southampton page covers work nearby (20 miles or so).
We work across RG28 for remedial sealant and the streets around it. We also cover Hurstbourne Priors (2 miles north-west), Whitchurch (2 miles north), Wells-in-the-Field (2 miles north-east), Freefolk (3 miles north-east) and Cole Henley (4 miles north). We also work in nearby towns such as Basingstoke (11 miles north-east), Winchester (10 miles south), Andover (6 miles west), Chandler's Ford (15 miles south), Tadley (13 miles north-east) and Hyde (9 miles south).
Around Firgo
The nearest railway station is Whitchurch (Hampshire) station, about 2.4 miles north of the centre.