Aberdeenshire · Scotland

Floor Joint Sealing in Ferryden

Floor joint sealing across Ferryden and nearby, with every bit of old sealant taken out first.

  • Concrete floor joints that have broken down
  • Threshold joints that have opened or worn
  • Open gaps along the bottom of skirting boards

Trusted floor joint sealing in Ferryden

About our floor joint sealing in Ferryden

We seal floor joints in homes, offices and commercial buildings across Ferryden. Each job starts with looking at the floor and the gap, because the right sealant depends on both. If you are dealing with threshold joints that have opened or worn and failed joint filler in concrete floors, we can put it right, whatever the surface.

Many newer homes in Scotland are timber-framed and settle as they dry out, so skirting and floor joints can open up. Older stone-built homes, meanwhile, often have timber floors that move with the seasons.

There’s a 12-month guarantee on every job, whatever its size.

Location
Ferryden (DD10)
Wider area
Aberdeenshire
Cover
One year on every job
Price
Quoted before any work starts
Email
info@mrmastic.co.uk
Updated
26 October 2026
The Mr Mastic team in navy uniforms in front of three Mr Mastic vans

Why act early in Ferryden

Caulk is quick and cheap, but it cracks where the joint moves or gets wet, but the movement soon cracks it. A flexible sealant moves with the floor, so the joint stays closed. Around Ferryden, water from a failed joint in an older stone home can soak into timber and plaster.

Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.

Why us?

  • Quality sealants from Arbo and Everbuild
  • You choose the colour before work begins
  • Rated 4.9 stars on Google
  • ARBOMaster approved applicator

Take a look at how sealant jobs are priced and customer reviews.

When it isn’t the sealant

We will not take on work that will not last, so these are the limits:

  • Loose, hollow or cracked tiles, which need a tiler
  • Structural movement or subsidence
  • Cracked or broken concrete slabs

Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we will tell you honestly before booking.

Joints and surfaces we work on

  • Tiled floors
  • Concrete floor joints
  • Commercial floors
  • Skirting boards
  • Thresholds
  • Wet room & bathroom floors

Ferryden: your questions answered

Do you work for landlords with property near Montrose station?

Yes, rental work is part of what we do. Just drop us a line at info@mrmastic.co.uk and tell us about the property, and we will give you a clear price.

Is Ferryden within the area you cover?

Yes, smaller places are covered as well as towns. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.

Do you seal warehouse floor joints?

Yes. Concrete floor joints in warehouses and units are part of our work. The product is chosen for the traffic the floor takes.

When can I walk on the floor?

You will get the times before we go. It depends on the sealant, and light foot traffic is usually fine before wet cleaning or wheels.

Can I do it myself?

Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.

Where do you work from?

We are a Crawley-based firm, with over 20 years’ experience. We work across South East England, London and Scotland.

Are you insured?

Yes. We’re fully insured for every job we do.

How long does floor joint sealing take?

As a guide, most jobs take a morning or an afternoon for most homes. Bigger jobs take longer, and we will say how long yours will take.

Surface by surface

Tiled floors

Large or heated tiled floors need room to move. Where needed, a line of grout is replaced with flexible sealant.

Skirting boards

Skirting-to-floor joints are a regular job for us. We take out any cracked caulk before sealing so the new sealant bonds.

What floor joint sealing looks like in Ferryden

Timber frame is common in newer Scottish homes, and as the frame dries and settles, skirting and sealant joints can open up. Across Aberdeenshire, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.

For landlords with property near Montrose station, open skirting and floor joints collect dirt and water, so seal them while the property is empty. Community buildings like Inchbrayock U.F. Church are part of the picture too: joints in its floors, skirtings and thresholds need resealing as they wear.

Ferryden is about 1 mile south of Montrose, in Aberdeenshire. If you need floor joint sealing in Ferryden, it’s easy to get a quote: please drop us a line at info@mrmastic.co.uk. We cover Aberdeenshire from our Crawley base, Ferryden included. We cover 161 towns and villages across Aberdeenshire. Dundee is on our list too, about 25 miles from Ferryden.

Jobs for floor joint sealing in DD10 works the same way as everywhere else we cover. That includes homes and businesses on Usan Road, Mill Lane and Croft Road. We also cover the places around Ferryden: Montrose (1 mile north), Kirkton of Craig (1 mile south-west), Hillside (3 miles north), Craigo (5 miles north) and St Cyrus (5 miles north). Within a short drive, we also cover Laurencekirk (9 miles north), Inverbervie (12 miles north-east) and Johnshaven (8 miles north-east).

Landmarks near Ferryden

Around Ferryden, our work takes us to homes and buildings near The Quarter Deck pub, among other places. Ferryden’s nearest station is Montrose station, roughly 0.9 miles north. A little further out are Montrose Museum (0.6 miles north) and Montrose Castle (0.6 miles north-west). Not far away are Montrose Basin.

Map of Ferryden © OpenStreetMap contributors

Do you need floor joint sealing in Ferryden?

Timber floors and skirting shrink and swell through the year. In winter, with the heating on, timber dries and gaps open and they change again in summer.

The most common problems we see are:

  • Skirting that has pulled away from the floor
  • Failed joint filler in concrete floors
  • Open joints that fill with dirt
  • Gaps at thresholds between rooms

Schools such as Montrose Academy are buildings too, and floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up.

Questions to ask before you book

  • What the cure time is
  • How much experience the applicator has
  • What product goes in the joint
  • How the surfaces are prepared before sealing

Our hiring checklist

For landlords and businesses

Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll give you a quote.

If you manage several properties in or around Ferryden, several properties can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.

Quotes for floor joint sealing in Ferryden

You will get a clear quote before work begins. It’s based on:

  • Which sealant suits the joint
  • Access and height
  • The number and length of the joints
  • How many rooms, windows or areas are involved

There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please send an email to info@mrmastic.co.uk and we’ll talk you through it.

Helping us quote

The more you tell us, the more accurate the quote. When you ask for a quote, tell us:

  • The problem you’ve noticed
  • Whether it’s a home or a business
  • Photos by email, if that is easy
  • The address or postcode of the job

We don’t publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, drop us a line at info@mrmastic.co.uk.

The process

A visit follows a simple pattern: we look at the joints together, protect the area around them, carry out the job and clear up. Most jobs take a few hours, depending on the length of joint. Somewhere like Ferryden may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.

  1. We start by looking at the floor, the gap and the traffic, then choose the product.
  2. Old caulk, grout or sealant is removed from the joint.
  3. The joint is vacuumed clean, with backing fitted wherever depth matters.
  4. A flexible sealant, or a floor-joint sealant for concrete, is applied in a colour to suit.
  5. We tool the joint neatly and tell you when it can be walked on and cleaned.

How to prepare

  • On commercial sites, let us know about site rules
  • Tell us about any previous sealing or DIY attempts
  • Where the joints are inside, avoid wetting them before we arrive

How to get a quote

Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we’ll explain what’s involved and give you a clear quote.

Get a quick quote

Advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job