Surrey · England
Floor & skirting joints in Esher, Surrey
Floor joint sealing across Esher and nearby, with old sealant always removed completely and a one-year guarantee.
- Open joints that fill with dirt
- Gaps between floors and kitchen plinths
- Open gaps along the bottom of skirting boards
FAQs for Esher
Is Esher within the area you cover?
Yes. Esher is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords with property near Esher station?
Yes, we work for landlords and letting agents. You can phone 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before any work starts.
Will I be able to paint over the new joint?
Where the skirting will be painted, we can use a flexible sealant that takes paint. Silicone won’t take paint, so it’s kept for wet areas and unpainted joints.
What does floor joint sealing cost?
It depends on the job, so we quote each one individually. To get one, ring 0345 464 0079 or send us an email and let us know what needs doing and where.
Where are you based?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
Can you quote for more than one area?
Of course. Doing several areas at once is generally more efficient, so mention them when you ask for a quote.
Do you seal floor joints in bathrooms and kitchens?
Yes. Where a floor meets a bath panel, kitchen plinth or skirting in a wet area, we use a flexible silicone to keep mop water out.
Will there be a smell?
Some sealants have a smell while they cure, but it fades. Ventilation helps.
How we handle floor joint sealing in Esher
In kitchens and bathrooms, the joint where the floor meets a bath panel, plinth or skirting takes mop water every day. We seal them with a flexible, water-resistant sealant. Common call-outs are for failed seals where bathroom floors meet baths and panels and tiled floors with no room to move, on wet room & bathroom floors, commercial floors and concrete floor joints.
For a new home in or near Esher, it’s worth checking the sealant early. Gaps at skirtings, shower seals pulling away and missing mastic around frames are common snags.
The work is covered for a year after we finish. If anything isn’t right with it, call 0345 464 0079 or email us.
- Where
- Esher (KT10, KT7, KT8)
- Wider area
- Surrey
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Can I do it myself?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
Nearby places to Esher
Other services in Esher
Landlords, agents and businesses in Esher
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
What happens on the day
We bring everything the job needs with us, so there’s nothing for you to buy. After a quick look at the joints together, we protect the area and start. Most jobs take a few hours for most rooms, longer for large commercial floors. Parking around Esher is generally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- First, the floor type, the gap and the traffic are checked.
- Any old caulk, grout or sealant is raked or cut out.
- We vacuum out the joint and add backing where the depth needs setting.
- The chosen sealant goes in, coloured to suit the floor.
- The joint is tooled neatly and the cure time explained.
Preparing for the visit
- Plan for the work area to be out of bounds to pets and children
- Where the joints are inside, avoid wetting them before we arrive
- Tell us about any water getting in
How to get a quote
We do not publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, phone 0345 464 0079 or email us.
Related advice
Why act early in Esher
Left open, concrete joints break down under traffic. Resealing it early protects the edges and keeps the damage down. In a smaller place like Esher, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
Why book with us
- Any old sealant cut out fully, not covered over
- Experience in homes, commercial sites and hotels
- Quality sealants from Arbo and Everbuild
- Rated 4.9 stars on Google
Read what affects the cost and customer reviews.
Surface by surface
Thresholds
Thresholds between rooms meet two floors and often a door frame. We seal them with a flexible sealant that suits both sides.
Concrete floor joints
Concrete floors have sawn or formed joints to control cracking. They’re resealed with a product chosen for what runs over them.
What we can’t put right
Sealant is not the answer to every problem, and we’d rather say so up front. It will not solve:
- Structural movement or subsidence
- A tiled floor that needs relaying
- Leaks from a failed tanking system
Not sure which it is? You can phone 0345 464 0079 or send us an email and we will tell you honestly before booking.
Where we work in Esher
- Skirting boards
- Thresholds
- Commercial floors
- Concrete floor joints
- Tiled floors
- Wet room & bathroom floors
What floor joint sealing looks like in Esher
Across Surrey, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.
Schools such as Milbourne Lodge School are buildings too, and floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up. Letting a property close to Esher station? Then gaps at skirtings and thresholds are worth sealing between tenancies. If you look after a church, hall or community building such as St George's Church, joints in its floors, skirtings and thresholds need resealing as they wear.
Esher is about 5 miles north-west of Epsom, in Surrey. Whether you are in the middle of Esher or further out, we cover floor joint sealing for every kind of property. 395 places in Surrey are on our list, from the larger towns to small villages. Our London page covers work nearby (15 miles or so).
Postcode districts we cover here for floor joint sealing: KT10, KT7 and KT8. Floor joint sealing is available to properties on High Street, Station Road and Warren Close. Esher is on the A244 and A307, so it’s easy for us to get to. Close by, we work in West End (1 mile south-west), Lower Green (1 mile north), Hinchley Wood (1 mile east), Claygate (1 mile south-east) and Weston Green (1 mile north-east). Larger places within reach include Guildford (12 miles south-west), Woking (10 miles west), Epsom (5 miles south-east), Redhill (12 miles south-east), Ewell (5 miles east) and Egham (9 miles north-west).
Local landmarks in Esher
In Esher, that means homes and buildings near Albert Arms, Esher Church of England High School and Claremont Park, among other places. The closest station to Esher is Esher station, roughly 0.8 miles north-east. A little further out are Chessington Castle Hill (3.2 miles east) and No. 2 New Zealand General Hospital (2.9 miles north-west). For a walk, there’s Jubilee Wood and The Lake.
Looking after it afterwards
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Avoid sloshing water against skirting
- Look at floor joints each spring
- Check the sealant is paintable before decorating
- Keep caulk for dry, still joints only
Keep heavy traffic off resealed concrete joints for the cure time we give you. Mark the area off so drivers avoid it until it’s ready.
A tiled floor that cracks along a line will keep cracking until it can move. A flexible joint added early helps protect the tiles themselves.