Isle of Wight · England
Arreton Floor Joint Sealing
Floor joint sealing in Arreton from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Failed joint filler in concrete floors
- Cracked grout where a tiled floor needs a movement joint
- Cracked caulk along skirting in bathrooms and kitchens
Landlord and commercial work in Arreton
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
Letting agents often deal with us directly. Tell us the address, the job and how access works and we will give you a quote.
About our floor joint sealing in Arreton
Every floor moves a little, so its edges need a joint that can flex. Skirting-to-floor gaps, tiled floor joints and concrete joints are all sealed. We are often asked to deal with worn sealant at door thresholds and grout cracking in a straight line across a floor, across concrete floor joints, skirting boards and wet room & bathroom floors.
For a small place like Arreton, the journey and access are planned in advance, and once on site, the job is the same as anywhere.
You’re covered for a year from the day we finish. If anything isn’t right with it, phone 0345 464 0079 or drop us an email.
- Place
- Arreton (PO30)
- Wider area
- Isle of Wight
- Cover
- One year on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Leave it or put it right?
Waiting until the next redecoration can mean a winter of draughts and dirt in the gaps. It’s a quick job to seal them now for most homes. Older cottages and farmhouses around Arreton can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
Why us?
- Every job guaranteed for a year
- We leave the area clean and tidy
- Anti-fungal sanitary silicone in wet areas
- Trusted Arbo and Everbuild sealants
Take a look at how sealant jobs are priced or what customers say.
Different surfaces, different methods
Tiled floors
The edge of a tiled floor, where it meets the wall or skirting, should be a flexible joint. Grout at the edge is removed and replaced with sealant.
Wet room and bathroom floors
Bathroom floor edges get wet at every clean. A neat silicone joint keeps it out.
Also in Arreton
Joints and finishes in Arreton homes
Across the Isle of Wight, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.
If you look after a church, hall or community building such as St. George's Church, joints in its floors, skirtings and thresholds need resealing as they wear.
Arreton is about 3 miles south-east of Newport, in the Isle of Wight. Whether you’re in the middle of Arreton or further out, floor joint sealing is available for homes and businesses alike. Arreton is one of 125 towns and villages in the Isle of Wight where we work. Our Portsmouth page covers work nearby (12 miles or so).
We work across the PO30 postcode area for floor joint sealing. Floor joint sealing is available to properties on Cherrywood View, Hopkins Walk and Hazely Combe. Close by, we work in Merstone (1 mile south-west), Downend (1 mile north), Hale Common (1 mile south), Newchurch (1 mile south-east) and Branstone (2 miles south-east). Larger places within reach include Newport (3 miles north-west), Ryde (5 miles north-east), Cowes (7 miles north-west), Sandown (4 miles east), Shanklin (4 miles south-east) and Ventnor (5 miles south). For island and remote addresses, a little more planning is needed, so mention it when you ask for a quote.
Around Arreton
Typical jobs here are in homes near The White Lion pub. Arreton’s nearest station is Sandown station, about 3.4 miles east of the centre. Other landmarks nearby include Museum of Country And Agriculture (0.5 miles south-east) and Carisbrooke Castle (3.5 miles west). For a walk, there’s Alverstone Mead and Brading Down.
The process
You don’t need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the job takes a few hours, depending on the length of joint in most cases. Somewhere like Arreton needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- The room is cleared along the joints so we can reach them.
- Old material is removed from the joint.
- Edges are cleaned and dried.
- We apply a flexible sealant suited to the floor and smooth it.
- We check the joints and explain the aftercare.
Preparing for the visit
- Move anything stored near the joints
- Keep pets and children clear of the area while we work
- Mention if the joints have been sealed before
Ask for a quote
Asking for a quote is easy: let us know what needs doing and where and its rough size. A few pictures by email make the job easier to understand.
Advice
Aftercare tips
After the cure time, these simple habits help:
- Avoid caulk in bathrooms and kitchens
- Sweep along the edges of the floor
- Get cracks along tile grout lines looked at early
- Check skirting joints after the heating season
Keep heavy furniture from dragging across the joints. Dragging can tear the bead.
Small gaps are quick to seal. Left alone, they collect dirt and widen.
Arreton: your questions answered
Will you come out to Arreton?
Yes, we do. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Can you help a landlord with a rental near Sandown station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just phone 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll give you a clear price.
Can I choose the sealant colour?
We help you choose a colour that suits. The choice depends on the product the joint needs.
When can I walk on the floor?
It depends on the product and the conditions. We give you the times for walking, cleaning and traffic when we finish so you can plan.
Will you leave a mess?
Tidy work is part of the job. Nearby surfaces are protected, and the area is left clean when we finish.
Can you add a movement joint to a tiled floor?
Often, yes, where it suits the floor. We remove the grout and seal the line with flexible sealant, giving the floor room to move.
Will there be a smell?
It depends on the product. Some smell for a while, some hardly at all.
Where is Mr Mastic based?
Our base is in Crawley, and we work across South East England, London and Scotland.
DIY sealant or a professional job?
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
What we are called out for in Arreton
Caulk is the usual filler for skirting. In a joint that moves or gets wet, it splits, which is why so many skirting joints look broken.
The problems people usually mention when they call include:
- Rigid edge joints in tiled floors
- Skirting that has pulled away from the floor
- Skirting caulk that keeps splitting
- Failed seals where bathroom floors meet baths and panels
If you let a flat or house near Sandown station, gaps at skirtings and thresholds are worth sealing between tenancies.
What to look for in a quote
- The length of the guarantee
- What the quote includes, VAT included or not
- Which colour the sealant will be
- What preparation is included