Hampshire · England
Andwell Floor Joint Sealing
Problem with your floor joints in Andwell? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Cracked grout where a tiled floor needs a movement joint
- Floor edges that trap water and grime
- Gaps at thresholds between rooms
Do you need floor joint sealing in Andwell?
Wheels crossing an unfilled concrete joint chip its edges. Hard wheels damage the joint edges until the joint widens.
Keep an eye out for any of the following:
- Cracked grout where a tiled floor needs a movement joint
- Caulk that has cracked where the floor moves
- Floor edges that trap water and grime
- Gaps between floors and kitchen plinths
For landlords with property near Hook station, open skirting and floor joints collect dirt and water, so seal them while the property is empty.
Questions to ask before booking
- Whether the sealant suits the joint
- How long the guarantee is
- How much experience the applicator has
- What the cure time is
How we handle floor joint sealing in Andwell
In commercial and industrial units, concrete floor joints take a hammering from wheels and traffic. Each is resealed with a floor-joint product suited to what runs over it. If you’re dealing with open joints around bathroom floor edges and skirting caulk that keeps splitting, we can help, on commercial floors, concrete floor joints and skirting boards alike.
For a small place like Andwell, the journey and access are planned in advance, and once on site, the job is the same as anywhere.
You get a one-year guarantee, the same in Andwell as everywhere else we work.
- Location
- Andwell (RG25, RG27, RG24)
- Wider area
- Hampshire
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Floor joint sealing in Andwell: local notes
Floors around Hampshire run from suspended timber in older homes to concrete in newer houses and units, and they do not all move the same way. That’s why the skirting and threshold joints need a flexible seal.
If you look after a church, hall or community building such as St Swithun's church, floor and skirting joints in halls and kitchens wear like any others.
Andwell is about 3 miles south-west of Hook, in Hampshire. Whether you are in the middle of Andwell or further out, floor joint sealing is available for homes and businesses alike, from flats and houses to offices and hotels. Andwell is one of 683 places in Hampshire where we work for floor joint sealing. There’s also a page for Reading, about 13 miles away.
We cover every part of RG25, RG27 and RG24 for floor joint sealing and the streets around it. Streets in the area include Greywell Road and Canal Reach, all of which we cover. Nearby, we also carry out floor joint sealing in Mapledurwell (1 mile south), Water End (1 mile north-east), Old Basing (1 mile west), Lychpit (2 miles west) and Wildmoor (2 miles north). Within a short drive, we also cover Basingstoke (4 miles west), Farnborough (11 miles east), Fleet (8 miles east), Aldershot (11 miles east), Alton (8 miles south) and Yateley (9 miles north-east).
Near you in Andwell
For rail, the closest station is Hook station, roughly 2.4 miles east. Other landmarks nearby include Festival Place (3.1 miles west) and Basingstoke and North Hampshire Hospital (4.2 miles west). For a walk, there’s Dogmersfield Lake and The Mill Field.
Surface by surface
Concrete floor joints
Hard wheels break down the edges of open joints. A sealed joint protects the edges and stops debris collecting.
Tiled floors
When grout cracks along a straight line, the floor is telling you it needs to move. We rake out that line and seal it if it’s in the right place.
Common questions in Andwell
I let a flat near Hook station. Can you help?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear quote.
Is Andwell within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Will you leave a mess?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
Can I add another job to the visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
Do you work on commercial floors?
Yes. Old filler is cleaned out and the joint resealed with a floor-joint product. Let us know about the traffic and we’ll quote.
Do I have to be there?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Can new sealant go over the old?
No. New silicone will not bond to old silicone, and anything trapped underneath, including mould and water, stays there. We remove it all first.
Why has a gap opened under my skirting?
Timber floors and skirting shrink and swell through the year. A flexible sealant closes the gap without cracking like caulk.
Why it’s worth doing now in Andwell
Waiting until the next redecoration can mean a winter of draughts and dirt in the gaps. Sealing them now is a short job. In a small place like Andwell, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
What you pay reflects the work, not a rough estimate. That is why we ask a few questions first and agree the price before starting.
Why book with us
- 180+ five-star Google reviews
- Quality sealants from Arbo and Everbuild
- White, clear, grey or another colour, product permitting
- Old sealant always removed completely
Read our cost guide and our reviews.
For landlords and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can be quoted together.
We also work for property managers and facilities teams. Several sites can go on one quote, and we are fully insured.
Nearby places to Andwell
More services for Andwell
How the visit works
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours, depending on the length of joint and we leave things clean and tidy. For a village or hamlet like Andwell, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First, the floor type, the gap and the traffic are checked.
- Any old caulk, grout or sealant is raked or cut out.
- We vacuum out the joint and add backing where the depth needs setting.
- We apply the sealant in a colour that suits the floor.
- The joint is tooled neatly and the cure time explained.
Getting ready for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Clear the area around the work
- Tell us about any previous sealing or DIY attempts
Getting a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email pictures if that is easy.
Related advice
What affects the cost of floor joint sealing
The quote reflects the job in front of us. We look at:
- The number of rooms or windows
- How much old sealant there is and how hard it is to remove
- Any working-time requirements on site
- The number and length of the joints
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
What we need to know
You do not need to know the technical terms. Just tell us:
- If it’s domestic, commercial or a hotel
- Any access issues, like height or stairs
- Any previous sealing or DIY work
- A few pictures by email, if you can
We quote each job on its own. Simply ring 0345 464 0079 or email us and describe the job, and pictures are welcome.
Should I try it myself first?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.