Kent · England
Fire-rated sealant in Wingham Well, Kent
Our applicators work in Wingham Well on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly and a one-year guarantee.
- Cracked or shrunken fire-rated sealant
- Standard silicone or caulk in a fire-stopping gap
- Open joints along the top of partitions
Fire rated sealant for homes and businesses in Wingham Well
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. Measuring the gap and checking what it’s made of comes first, then apply it to the depth its tested detail calls for. We work on door frames, flats & HMOs and linear gaps, and people most often call us about door frames with gaps between frame and wall and seals cut through by electricians, plumbers or data installers.
For a small place like Wingham Well, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
Big or small, you get the same one-year guarantee in Wingham Well and across Kent.
- Place
- Wingham Well (CT3)
- Region
- Kent
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Fire rated sealant around Wingham Well
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
If you look after a church, hall or community building such as St Mary's Church, service openings in its walls need the right fire-rated sealant, as in any building. If you look after a building such as Wingham Primary School, service openings in fire-resisting walls need checking after any refurbishment.
Wingham Well is about 5 miles east of Canterbury, in Kent. We carry out fire rated sealant for homes and businesses in Wingham Well and the surrounding area. Wingham Well is one of 922 places in Kent we cover. You can also see our page for Chelmsford, roughly 45 miles from Wingham Well.
We cover every part of CT3 for fire rated sealant and the streets around it. We cover properties on Watercress Lane and Wingham Well Lane. We also cover the places around Wingham Well: Wingham Green (1 mile north-west), Wingham (1 mile north-east), Well Head (1 mile east), Broomhill (1 mile north-east) and Twitham (2 miles east). Within a short drive, we also cover Canterbury (5 miles west), Margate (11 miles north-east), Dover (10 miles south-east), Folkestone (13 miles south), Ramsgate (10 miles north-east) and Broadstairs (12 miles north-east).
Landmarks near Wingham Well
Typical jobs here are in homes near The Haywain Public House. The nearest railway station is Adisham station, roughly 1.7 miles south of the centre. A little further out are St Martins Hospital (4.2 miles west).
What we do, step by step
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The work itself takes anything from a few hours to several days, depending on how many gaps there are from start to finish. Somewhere like Wingham Well needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Before starting, we go through the specification or action list with you.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out.
- We fit backing where needed and apply the fire-rated sealant to depth.
- We hand over a list of locations and products.
How to prepare
- For business premises, tell us about site rules or sign-in
- Mention any tricky access
- Mention if the joints have been sealed before
Get a quote
We don’t publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or drop us an email.
Related advice
For landlords and businesses
If you manage several properties in or around Wingham Well, jobs at different addresses can go on one quote. Send us the addresses and the work at each.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Common questions in Wingham Well
Is Wingham Well within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords with property near Adisham station?
Yes. We work for landlords and letting agents as well as homeowners, and several properties can go on one quote. You can call 0345 464 0079 or send us an email with the details for a clear quote.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Are you an approved applicator?
Yes. We are an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
Is the work guaranteed?
Yes. There’s a 12-month guarantee on every job.
Where are you based?
Mr Mastic is based in Crawley. We cover Wingham Well and the rest of Kent, along with the rest of our area.
Do I have to be there?
That depends on where the joints are. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.
Is there any odour?
Some sealants have a smell while they cure. Ventilation helps.
What we’re called out for in Wingham Well
Many open fire-stopping gaps are made after the building is finished. Electricians, plumbers and data installers drill through walls and ceilings and the hole round the new service is not always sealed again.
Common reasons people contact us include:
- Old fire sealant that has split or come away
- New service routes left unsealed after building work
- Open joints along the top of partitions
- Gaps around pipes and cables through fire-resisting walls
If you let a flat or house near Adisham station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
What to look for in a quote
- When the joint can take water or movement
- How hidden problems are handled
- Whether all the old sealant comes out first
- What preparation is included
Different surfaces, different methods
Masonry and concrete
Brick, block and concrete walls and floors are sealed with products tested in masonry. The gap is cleaned of dust first so the sealant bonds.
Flats and HMOs
In flats and HMOs, the walls and floors between homes and common areas need sealing where services pass through. We seal the gaps your assessor has identified, flat by flat if needed.
How to look after the new joints
Once the sealant has cured, a few habits help it last:
- Include hidden areas like risers in routine checks
- Never patch a fire seal with standard sealant
- Flag any open gap you spot round a pipe or cable
- Store the list of sealed gaps with your building paperwork
Don’t add foam, filler or ordinary sealant over a fire seal. Repairs should use a matching fire-rated product. Ask us if you’re not sure which product was used.
Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes.
Towns and villages near Wingham Well
Other services in Wingham Well
DIY sealant or a professional job?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
What sealant work cannot fix
We’d rather tell you now than do work that will not last, so these are the limits:
- Fire risk assessments, which need a qualified assessor
- Sign-off of the building, which sits with building control or your assessor
- Openings too large for sealant, which need batts, boards or another system
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think before booking.
What we seal
- Plasterboard & masonry
- Linear gaps
- Service penetrations
- Pipe & cable gaps
- Door frames
- Flats & HMOs