Shetland Islands · Scotland
Fire-rated sealant in Toab, Shetland Islands
Fire-stopping gaps in Toab need attention? We cut out the old, prepare the joints and apply the right sealant.
- Open joints along the top of partitions
- Joints picked up in a fire-stopping survey
- New service routes left unsealed after building work
Landlord and commercial work in Toab
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we’ll give you a quote.
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
About our fire rated sealant in Toab
We don’t assess buildings or decide what fire stopping is needed; your assessor, designer or building control sets that out. What we do is apply the right product to that specification, properly and neatly. Common call-outs are for unsealed gaps around fire door frames and gaps around pipes and cables through fire-resisting walls, across linear gaps, door frames and service penetrations.
For a place like Toab, the journey and timings are planned in advance, so it can be fitted around bookings or opening times where possible.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Place
- Toab (ZE3)
- Region
- Shetland Islands
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Towns and villages near Toab
Other services in Toab
Your questions about fire rated sealant in Toab
Is Toab within the area you cover?
Yes. Toab is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland, including the islands, where work is planned around ferry crossings. Let us know about access, parking and anything unusual about getting there when you book.
Are the rules for fire-rated sealant different in Scotland?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that is how we fit it. We do not certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Where are you based?
Our base is in Crawley, and we work across South East England, London and Scotland.
What should I tell you?
The location, the problem and the rough size of the job. Photos by email help too.
Are you insured?
Yes. Full insurance covers our work.
What does intumescent mean?
Intumescent means it swells when heated. It’s one type of fire-rated sealant; which product suits depends on the gap, the substrate and the service.
Can I choose the sealant colour?
Yes. Sealants come in white, clear, grey and other colours for many products, and we agree the colour with you before any work starts.
Can you tell me how many minutes the seal will last?
Ratings and certification sit with the product’s test evidence and whoever specified the work. We apply the specified product to the manufacturer’s details and list the locations and products for you.
Commercial buildings in Toab
If you run a hotel, guest house or holiday let in a coastal place like Toab, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details, though we do not certify buildings or do fire risk assessments.
Around Toab, as everywhere, fire rated sealant is only as good as the preparation behind it.
Toab is in the Shetland Islands. Jobs in Toab get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Toab is one of 63 towns and villages in the Shetland Islands we cover for fire rated sealant.
Our applicators cover all of ZE3 for fire rated sealant. Other places close to Toab include Hestingott (1 mile north-west), Exnaboe (1 mile east), Scatness (1 mile south), Boddam (2 miles north) and South Scousburgh (3 miles north). Island and remote addresses take a little more planning, so please mention your location when you email us at info@mrmastic.co.uk.
Near you in Toab
Nearby you’ll also find Shetland Crofthouse Museum (1.9 miles north). The countryside around Toab includes Loch of Huesbreck and Sumburgh Head RSPB reserve.
How it works
You do not need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the work takes anything from a few hours to several days, depending on how many gaps there are in most cases. For a place like Toab, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- We remove any old or unsuitable filler and clean the gap.
- Backing or fill is fitted where the product’s tested detail calls for it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Finally, we list where we worked and what we used, for your records.
How to prepare
- Tell us if parking is tricky
- Tell us about any previous sealing or DIY attempts
- Let us know about stairs, lifts or work at height
Ask for a quote
Want a quote for fire rated sealant? Please drop us a line at info@mrmastic.co.uk with a few details. We’ll explain what we’d do and give you a clear price before we start.
Advice
When it isn’t the sealant
New sealant cannot fix everything, and we’d rather say so up front. It will not solve:
- Walls or floors that weren’t built to resist fire
- Openings too large for sealant, which need batts, boards or another system
- Assessing a building’s fire safety
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we’ll tell you honestly.
Where we work in Toab
- Pipe & cable gaps
- Service penetrations
- Flats & HMOs
- Linear gaps
- Door frames
- Plasterboard & masonry
What affects the cost of fire rated sealant
Jobs vary more than people expect. What affects the quote:
- The type of sealant required
- How many areas need sealing
- How much there is to do
- Whether the work is at height
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Asking for a quote
There’s no need for technical detail. Just tell us:
- The problem you’ve noticed
- A few photos by email, if you can
- The rough size of the job
- If someone has resealed it before
Every job is quoted individually, so the first step is telling us about yours. Simply email us at info@mrmastic.co.uk and describe the job.
Why deal with it now?
An open gap in a fire-resisting wall is a route for smoke and fire. Sealing it properly restores what the wall was there to do, and the sealing itself is often a contained piece of work. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water behind a failed seal does the most damage when nobody’s watching.
What you pay reflects the work, not a rough estimate. That’s why we ask about the job first and send you a clear quote before work begins.
Why us?
- ARBOMaster approved applicator
- 4.9 on Google from 180+ five-star reviews
- 20+ years of sealant experience
- Anti-fungal silicone where joints get wet
Read how sealant jobs are priced and our reviews.
Surface by surface
Masonry and concrete
Brick, block and concrete walls and floors are sealed with products tested in masonry. We clean out dust and debris before sealing so the sealant bonds.
Service penetrations
New gaps tend to show up where services have been added. We clean out what’s there and reseal to the right depth over any backing the detail calls for.
Signs you need fire rated sealant in Toab
Over time, buildings change layout and use. Conversions to flats and HMOs, and office refits, create new walls and new routes for services, with gaps to match.
The problems people generally mention when they call are:
- Cracked or shrunken fire-rated sealant
- Open gaps behind door architraves
- Joints picked up in a fire-stopping survey
- Holes left by a change of layout
Whether the job is in Toab itself or nearby, the right material for each joint matters as much as a neat finish.
Before you book anyone
- What preparation is included
- Is the old sealant removed completely?
- How long to leave it before use
- How much experience the applicator has