Shetland Islands · Scotland
Fire Rated Sealant in Levenwick
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Levenwick, with a 12-month guarantee on every job. Ask us for a quote.
- Standard silicone or caulk in a fire-stopping gap
- Unsealed gaps around fire door frames
- Seals cut through by electricians, plumbers or data installers
Fire rated sealant for homes and businesses in Levenwick
We do not assess buildings or decide what fire stopping is needed; that comes from your fire risk assessor, designer or building control. What we do is apply the right product to that specification, properly and neatly. We work on service penetrations, linear gaps and flats & HMOs, and people most often call us about gaps where walls meet ceilings or slabs and open holes round services passing through fire walls.
Work in a place like Levenwick is planned ahead, journey included, so it can be fitted around bookings or opening times where possible.
Your job is guaranteed for a year, as with all our work.
- Where
- Levenwick (ZE2)
- Wider area
- Shetland Islands
- Guarantee
- 12 months on all our work
- Price
- A clear price before we start
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What sealant work can’t fix
To be straight with you, there are a few things sealant won’t fix:
- Fire risk assessments, which need a qualified assessor
- Sign-off of the building, which sits with building control or your assessor
- Construction that doesn’t provide fire resistance on its own
If in doubt, email us at info@mrmastic.co.uk and we’ll say what we think.
What we seal
- Door frames
- Pipe & cable gaps
- Plasterboard & masonry
- Linear gaps
- Flats & HMOs
- Service penetrations
How the visit works
On the day, we look over the joints with you first, so there are no surprises. Surfaces next to the work are protected before any work starts. The work normally takes from a few hours to a few days, depending on the number of gaps and the access. Outside jobs in Levenwick need a dry day, because sealant will not bond to a wet joint, so an outdoor job can move if the forecast changes. Work indoors isn’t affected.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out and the faces cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your files.
Getting ready for the visit
- Keep pets and children clear of the area while we work
- Clear items away from the joints we are working on
- For business premises, tell us about site rules or sign-in
Getting a quote
If you’re in Levenwick and need fire rated sealant, drop us a line at info@mrmastic.co.uk. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Read more
Keeping the joints in good condition
Joint life depends on how it’s used and looked after. We suggest:
- Photograph sealed gaps before they’re covered up
- Check risers, ceiling voids and cupboards during building checks
- File the fire-stopping record where your assessor can find it
- Check whether a sealant can be painted before decorating over it
Avoid covering a sealed gap with anything that isn’t part of the tested detail. If it needs repair, use the same type of product. We can tell you which product we used.
Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes.
Leave it or put it right?
For some gaps, sealant isn’t the right answer and another system is needed. Big openings, bundles of cables and plastic pipes may need batts, collars or wraps instead. We will say so if a gap needs something other than sealant. Exposed walls in smaller Scottish places take a lot of wind and rain, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Ask us for a quote and we will explain what it covers.
Why us?
- Arbo and Everbuild products
- Sanitary silicone with an anti-fungal additive in wet areas
- An ARBOMaster approved applicator
- Tidy, careful work
Take a look at what affects the cost and customer reviews.
What fire rated sealant looks like in Levenwick
For seaside hotels, guest houses and holiday lets around Levenwick, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Island jobs need planning around ferries and the weather, so the more notice, the better.
In and around Levenwick, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Levenwick is in the Shetland Islands. Levenwick gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. We cover 63 towns and villages across the Shetland Islands.
All of ZE2 is covered for fire rated sealant, from the main roads to the quietest streets. That includes homes and businesses on Staneybrake and South Punds Park. Neighbouring places we cover for fire rated sealant include Bigton (2 miles west), Hoswick (2 miles north), Sandwick (2 miles north-east), South Scousburgh (3 miles south-west) and Boddam (3 miles south). We also work in nearby towns such as Lerwick (13 miles north), Sound (12 miles north) and Scalloway (12 miles north). If you are somewhere remote, a little more planning is needed.
Landmarks near Levenwick
Nearby you’ll also find Shetland Crofthouse Museum (3.9 miles south). Open spaces near Levenwick include Loch of Clumlie.
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Other services in Levenwick
How we quote for fire rated sealant
Your quote is based on your job. We look at:
- The old material and how stubborn it is
- How many rooms, windows or areas are involved
- Access and height
- The type of sealant required
The cost depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You’ll have a clear quote before any work starts.
Helping us quote
To help us quote quickly, let us know:
- Any previous sealing or DIY work
- The problem you’ve noticed
- A few pictures by email, if you can
- Any access issues, like height or stairs
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work and give you a clear price.
What we’re called out for in Levenwick
Sealant applied too thin, without the backing its detail needs, or onto dust won’t perform as it was tested. We see plenty of fire stopping that was hurried.
Common reasons people contact us include:
- Open holes round services passing through fire walls
- Joints picked up in a fire-stopping survey
- Holes left by a change of layout
- Seals cut through by electricians, plumbers or data installers
For jobs in and around Levenwick, choosing the right material for each joint is as important as a tidy finish.
Questions to ask before you book
- What guarantee comes with the work
- How hidden problems are handled
- What the quote includes, VAT included or not
- Whether you can choose the colour
FAQs for Levenwick
Do you cover smaller places like Levenwick?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland, including the islands, where work is planned around ferry crossings. Let us know about access, parking and anything unusual about getting there when you book.
Do Scottish building rules affect fire-rated sealant work in Levenwick?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We don’t certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Do you work in flats, HMOs and commercial buildings?
Yes, in flats, HMOs, schools, offices and other buildings, occupied or empty. Let us know the building’s hours and we will plan the work to suit.
How long will you be here?
A typical job takes a few hours for a handful of gaps, and longer for a whole building. We will confirm how long when we quote.
Do I need to be at home?
Access is agreed with you when the job is booked. Indoors, that generally means someone at home.
Do you do fire sealant around door frames?
Yes. Gaps behind architraves are a common job for us. Doors, seals and closers need a door specialist.
Is it messy?
Not at all. The area is protected while we work and cleaned up afterwards.
Can new sealant go over the old?
No, it won’t last. It may look fine at first, but the new bead soon lifts. The old sealant has to come out completely.