Surrey · England
Fire Rated Sealant in Tilford
Fire rated sealant for Tilford, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Seals cut through by electricians, plumbers or data installers
- Door frames with gaps between frame and wall
- Gaps around pipes and cables through fire-resisting walls
How we handle fire rated sealant in Tilford
Until it’s heated, intumescent sealant behaves like an ordinary sealant; in a fire it expands into the joint. Which product suits a gap depends on its width, the materials either side and what runs through it. We work on pipe & cable gaps, flats & HMOs and door frames, and the jobs we see most are linear gaps at the head of walls and unsealed gaps where pipes and cables go through a wall.
Work in a small place like Tilford is planned ahead, journey included, so it can be fitted around guests, clients or events where possible.
There’s a 12-month guarantee on every job, whatever its size.
- Where
- Tilford (GU10)
- Region
- Surrey
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
FAQs for Tilford
Do you cover smaller places like Tilford?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords with property near Farnham station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can ring 0345 464 0079 or email us with the details for a clear quote.
Do you carry out fire risk assessments?
No. Your fire risk assessor, designer or building control decides that. We apply fire-rated sealant to the requirements they set.
Do I need to be at home?
We need access to the joints, so we will agree that with you when we book. Indoors, that usually means someone at home.
Do you remove the old sealant?
Yes, every time. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.
Can you seal over the old sealant?
No. The old sealant always comes out first, so the new joint bonds to clean surfaces.
What do you need from me for a quote?
Only a few details: the address or postcode, what’s wrong and any access issues. Then ring 0345 464 0079 or drop us an email.
Where is Mr Mastic based?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
When it is not the sealant
In fairness, there are a few things sealant won’t fix:
- Construction that doesn’t provide fire resistance on its own
- Issuing a fire rating or certificate for a building
- Openings too large for sealant, which need batts, boards or another system
Not sure which it is? You can call 0345 464 0079 or email us and we’ll tell you honestly.
Joints and surfaces we work on
- Linear gaps
- Pipe & cable gaps
- Flats & HMOs
- Door frames
- Service penetrations
- Plasterboard & masonry
When to call us in Tilford
A lot of fire stopping is out of sight: in ceiling voids, service risers and behind boxing. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.
Most people get in touch after spotting one of these:
- Sealant items on a fire risk assessment action list
- Linear gaps at the head of walls
- Open holes round services passing through fire walls
- Gaps left after a refit or conversion
If you look after a building such as Waverley Abbey CofE Junior School, fire-stopping around service openings should be restored whenever new services go in.
What your quote should include
- How much experience the applicator has
- What insurance they hold
- Is VAT in the price?
- Whether you can choose the colour
What happens if it’s left?
Fire-rated sealants are less forgiving than ordinary ones. How it’s installed changes how it performs, and we work to the product details every time. Where a wall is exposed, as many are in small places like Tilford, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Why us?
- We leave the area clean and tidy
- ARBOMaster approved applicator
- Any old sealant cut out fully, not covered over
- 180+ five-star Google reviews
Take a look at how sealant jobs are priced or customer reviews.
Nearby places to Tilford
What else we do in Tilford
How it works
There’s no need to move everything out, just the space around the work. We protect the rest, and the work takes anything from a few hours to several days, depending on how many gaps there are in most cases. In a small place like Tilford, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out and the faces cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used for your records.
Getting ready for the visit
- Clear the area around the work
- Tell us if parking is tricky
- Keep children and pets away from the work area
Ask for a quote
We do not publish a price list. Instead, we give you a clear quote for your job. To arrange one, ring 0345 464 0079 or send us an email.
Related advice
How to look after the new joints
Once the sealant has cured, a few habits help it last:
- Ask every contractor to reseal any fire stopping they disturb
- Take pictures of fire stopping before ceilings or boxing go back
- Flag any open gap you spot round a pipe or cable
- Keep general-purpose foam and caulk away from fire-stopping gaps
Avoid covering a sealed gap with anything that is not part of the tested detail. Repairs should use a matching fire-rated product. We can tell you which product we used.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Sealing it early is a simple step to take.
Workplaces and buildings in Tilford
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
Community buildings like Church of All Saints are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking. For landlords with property near Farnham station, any gap left by new services in shared walls should be closed with a fire-rated product.
Tilford is about 3 miles south-east of Farnham, in Surrey. Homes, rented property, offices and hotels in Tilford is covered for fire rated sealant, old or new, large or small. Every job comes with our one-year guarantee. Tilford is one of 395 places in Surrey we cover. Our Reading page covers work nearby (21 miles or so).
Work in GU10 works the same way as everywhere else we cover. Whether your property is on Tilford Street, Shepherds Way and Riversmeet or anywhere close by, our applicators can take on the job. If you are just outside Tilford, we cover Tilford Reeds (1 mile south-west), Tilford Common (1 mile south), Charleshill (1 mile east), Lower Bourne (2 miles west) and Millbridge (2 miles south-west). Within a short drive, we also cover Guildford (9 miles north-east), Woking (12 miles north-east), Camberley (10 miles north), Farnham (3 miles north-west), Frimley (9 miles north) and Haslemere (7 miles south).
Landmarks near Tilford
Typical jobs here are in homes near Barley Mow pub, Thundry Meadows and South Farnham School and the streets around them. For rail, the closest station is Farnham station, roughly 2.5 miles north-west of the centre. Well-known places in the area include Milford Hospital (5.5 miles east) and Farnham Castle (3.2 miles north-west). Open spaces near Tilford include Upper Lake and Culverswell Hill.
For landlords and businesses
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
What affects the quote in Tilford
You’ll get a clear quote before work begins. It’s based on:
- The product the joint needs
- The number of rooms or windows
- Working hours on commercial sites
- How much old sealant there is and how hard it is to remove
A failed joint rarely gets cheaper to fix by waiting. If you’re unsure, phone 0345 464 0079 or send us an email for an honest opinion and a quote.
What we need to know
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Whether it’s a home or a business
- A few photos by email, if you can
- The rough size of the job
- How we’d reach the joints
We quote each job on its own. Simply call 0345 464 0079 or send us an email and describe the job, and photos are welcome.