Moray · Scotland

Fire Rated Sealant in Thomshill

Fire-stopping gaps in Thomshill need attention? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.

  • Damaged fire sealant left by other trades
  • Sealant items on a fire risk assessment action list
  • Gaps around pipes and cables through fire-resisting walls

Fire rated sealant in Thomshill

About our fire rated sealant in Thomshill

Intumescent sealant looks much like any other sealant until it gets hot; in a fire it expands into the joint. The right product depends on the gap size, the substrate and what passes through. We work on flats & HMOs, linear gaps and door frames, and people most often call us about open holes round services passing through fire walls and fire seals that have cracked with movement.

In a smaller place like Thomshill, commercial jobs are more likely to be a hotel, guest house, school, surgery or community hall than an office block. All of them have washrooms, kitchens and fire-rated joints that need looking after.

Each job carries a 12-month guarantee, large or small.

Mr Mastic applicators lined up beside the company vans, one holding a sealant gun
Where
Thomshill (IV30)
Region
Moray
Cover
12 months on all our work
Quote
A clear price before we start
Email
info@mrmastic.co.uk
Page updated
26 October 2026

Commercial buildings in Thomshill

In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.

If you look after a church, hall or community building such as Birnie Kirk, gaps around pipes and cables are worth checking after any building work there. Managing a site like Elgin High School? Then service openings in fire-resisting walls need checking after any refurbishment. If you let a flat or house near Elgin station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.

Thomshill is about 3 miles south of Elgin, in Moray. Anywhere in IV30, our applicators can take on fire rated sealant. Our Moray coverage runs to 58 places, Thomshill among them. We also work in Aberdeen, around 54 miles away.

Postcode districts we cover here for fire rated sealant: IV30. Local streets include Glenlossie Road and Mannochmore, all of which we cover. Other places close to Thomshill include Longmorn (1 mile east), Fogwatt (1 mile east), Miltonduff (2 miles north-west), Pittendreich (3 miles north-west) and Hallowood (3 miles north-east). We also work in nearby towns such as Elgin (3 miles north), Buckie (14 miles east), Forres (11 miles west), Lossiemouth (8 miles north), Keith (14 miles east) and Burghead (9 miles north-west). Remote and island addresses need a little more planning, so please mention your location when you send an email to info@mrmastic.co.uk.

Landmarks near Thomshill

The closest station to Thomshill is Elgin station, about 3 miles north. Nearby you’ll also find Elgin Museum (3.4 miles north) and Dr Gray's Hospital (3.2 miles north). Green spaces nearby include Findlay's Seat.

Map of Thomshill © OpenStreetMap contributors

How it works

Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, do the work and tidy away. It normally takes anything from a few hours to several days, depending on how many gaps there are. For a place like Thomshill, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.

  1. Before starting, we go through the specification or action list with you.
  2. We measure every gap and note what it’s in and what passes through.
  3. Any non-fire-rated filler is removed and the faces cleaned.
  4. The specified fire-rated sealant goes in over any backing its detail requires.
  5. We hand over a list of locations and products for your files.

Preparing for the visit

  • Mention any sign-in or site rules at work premises
  • Clear the area around the work
  • Keep pets and children clear of the area while we work

How to get a quote

If you’re in Thomshill and need fire rated sealant, email us at info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.

Ask for a quote

Read more

When something else is needed

Some problems need a builder, plumber or other trade rather than us:

  • Openings too large for sealant, which need batts, boards or another system
  • A wall that isn’t a fire-resisting element to begin with
  • Doors that are not fire doors in the first place

Not sure which it is? You can send an email to info@mrmastic.co.uk and we’ll tell you honestly.

Surfaces we seal

  • Linear gaps
  • Service penetrations
  • Plasterboard & masonry
  • Flats & HMOs
  • Pipe & cable gaps
  • Door frames

Landlords, agents and businesses in Thomshill

Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll give you a quote.

Failed sealant is one of the commonest items on a check-out report. Several properties can go on one quote.

Different surfaces, different methods

Service penetrations

Service penetrations are where new gaps often appear. We clean out what’s there and reseal to the right depth.

Linear gaps

Gaps along the top of partitions are easy to miss above a ceiling. We work along the whole run leaving no stretch unsealed.

DIY versus a professional finish

If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.

A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.

Why it’s worth doing now in Thomshill

If an assessor has flagged gaps, it makes sense to close them before the next review. Having them sealed and recorded now gives you evidence that the item was dealt with. In an older home around Thomshill, damp from a failed joint can get into timber and plaster.

We do not show prices on the website, because the cost depends so much on the job itself. Call for a quick quote and we will talk you through it.

Why book with us

  • Anti-fungal silicone where joints get wet
  • One-year guarantee on every job
  • 20+ years of sealant experience
  • Homes, businesses and hotels

See our cost guide or customer reviews.

How we quote for fire rated sealant

We don’t publish a price list, because no two jobs are the same. What we look at:

  • Mould in or behind the old joints
  • Whether old sealant or filler has to be cut out
  • The number of rooms or windows
  • Whether the work is at height

Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part, and we will explain the quote if you ask.

Helping us quote

To make quoting easier, please include:

  • The rough size of the job
  • Any access issues, like height or stairs
  • Whether it has been sealed before
  • Whether it’s a home or a business

To get a quote, drop us a line at info@mrmastic.co.uk with the location and a short description of the problem. We will send you a clear quote before any work starts.

Thomshill: your questions answered

Will you come out to Thomshill?

Yes. Thomshill is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.

Can you help a landlord with a rental near Elgin station?

Yes, we work for landlords and agents. Just email us at info@mrmastic.co.uk and tell us about the property, and we will send you a clear quote.

Do you provide details of the products used?

Yes. You get a list of where we worked and what we used.

Will it make a mess?

Not at all. We work neatly, protect the area around the joints and tidy up afterwards.

Can you match the sealant colour?

Normally, yes. Sealants come in white, clear, grey and other colours, and we agree the colour with you before we start.

Is standard sealant good enough for a fire gap?

No. Where a fire-rated seal is needed, it has to be a product tested for that use fitted to the maker’s details.

Are you ARBOMaster approved?

Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.

Is intumescent sealant the same as fire-rated sealant?

Fire-rated is the broad term for sealants tested for fire stopping. Intumescent ones swell in heat, and they’re one option among several. The specification and the tested detail decide which is used.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job