Argyll and Bute · Scotland
Strachur Fire Rated Sealant
Problem with your fire-stopping gaps in Strachur? We cut out the old, prepare the joints and apply the right sealant.
- Gaps filled with a product that isn’t fire-rated
- Fire stopping disturbed by later work
- Sealant items on a fire risk assessment action list
Fire rated sealant in Strachur
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. A new cable run or a replaced pipe can leave an open hole behind. We seal them with a product tested for that kind of gap. If you’re dealing with gaps flagged on a fire risk assessment and open gaps behind door architraves, we can put it right, on flats & HMOs, pipe & cable gaps and service penetrations alike.
In a smaller place like Strachur, commercial jobs are more likely to be a hotel, guest house, school, surgery or community hall than an office block. Each needs sound sealant in its washrooms and kitchens, and fire-rated joints kept in good order.
The work is covered for a year after we finish. If anything is not right with it, drop us a line at info@mrmastic.co.uk.
- Where
- Strachur (PA27)
- Region
- Argyll and Bute
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
How we quote for fire rated sealant
There’s no set price list, because jobs vary so much. The quote depends on:
- Which sealant suits the joint
- Working hours on commercial sites
- Whether old sealant or filler has to be cut out
- The size of the job
What you pay reflects the work, not a rough estimate. That is why we ask a few questions first and send you a clear quote before we start.
Asking for a quote
Photos help, but a description is a good start. Please mention:
- The type of property
- What’s wrong with the joints now
- Where the job is, and your postcode
- If someone has resealed it before
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, drop us a line at info@mrmastic.co.uk.
Nearby places to Strachur
What else we do in Strachur
How it works
At the end, we look at the finished work together and explain the cure time. The visit itself usually takes a few hours for a handful of gaps, and longer for a whole building, depending on the size of the job. Around Strachur, distance and access matter more than parking. Tell us how to find the property and how to reach the work, and the visit is planned around that.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- We record the locations and products used for your records.
How to prepare
- Let us know if you’ve seen damp or leaks
- Tell us about access, such as stairs, a lift or high-level joints
- Try not to wet indoor joints just before the visit
How to get a quote
Every job is quoted individually. Just drop us a line at info@mrmastic.co.uk with the details and send pictures if you have them.
Read more
Your questions about fire rated sealant in Strachur
Will you come out to Strachur?
Yes, Strachur is covered. We work across all of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Do Scottish building rules affect fire-rated sealant work in Strachur?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that is how we fit it. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
What should I tell you?
Tell us what needs doing and where, with pictures by email if possible. If we need more, we’ll ask.
Do you carry out fire risk assessments?
No, we don’t assess buildings. Once you have a specification or action list from your assessor or designer, we will quote for the sealant work on it.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator.
Is intumescent sealant the same as fire-rated sealant?
An intumescent sealant expands when it gets hot, helping close the gap. It’s one type of fire-rated sealant; the right one depends on the gap and what passes through it.
Where is Mr Mastic based?
Our base is Crawley. Our area covers South East England, London and Scotland.
What fire rating will the seal have?
Ratings and certification sit with the product’s test evidence and whoever specified the work. We apply the specified product to the manufacturer’s details and list the locations and products for you.
Keeping the joints in good condition
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Ask which product was used before you paint
- Look in service cupboards and ceiling voids from time to time
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Photograph sealed gaps before they’re covered up
Leave the sealant to cure fully before painting near it. Some fire-rated sealants can be painted and some can’t.
If a fire risk assessment has flagged a gap, do not leave it for the next one. Have it sealed, then keep the record so the item can be closed.
Do you need fire rated sealant in Strachur?
Movement in the structure can open gaps too: cracked or debonded sealant leaves an open route through the wall. Damage from cleaning, knocks and maintenance adds to it.
People usually contact us when they notice something like this:
- Seals cut through by electricians, plumbers or data installers
- Gaps where walls meet ceilings or slabs
- Joints picked up in a fire-stopping survey
- Open holes round services passing through fire walls
For buildings such as Kilmaglash Parish Church and Sculptured Stones, older buildings that have had new heating or wiring often have service gaps worth checking.
What to look for in a quote
- What happens if they find a problem under the old sealant
- The length of the guarantee
- Is the old sealant removed completely?
- What the cure time is
Commercial buildings in Strachur
For seaside hotels, guest houses and holiday lets around Strachur, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details; we do not certify buildings or carry out fire risk assessments.
Around Strachur, as everywhere, fire rated sealant is only as good as the preparation behind it.
Strachur is about 17 miles north-west of Helensburgh, in Argyll and Bute. Strachur gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Strachur is one of 118 towns and villages in Argyll and Bute we cover for fire rated sealant. Our Glasgow page covers work nearby.
Work in PA27 is quoted and booked the same way as anywhere else. Streets in the area include Montgomery Place, Manse Gardens and Forest View, and we cover them all. Neighbouring places we cover for fire rated sealant include Inbhir Aora (4 miles north), Inveraray (4 miles north), Lochgoilhead (6 miles east), Cairndow (8 miles north-east) and Minard (8 miles south-west). We also work in nearby towns such as Rhu (15 miles south-east), Garelochhead (11 miles south-east) and Sandbank (14 miles south). For island and remote addresses, the job takes a little more planning.
Around Strachur
Other landmarks nearby include Strachur Smiddy Museum (under half a mile north-west).
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
How the job changes by surface
Door frames
Behind most architraves is a gap between frame and wall. Where it’s open, we seal it to the product’s details for that gap size before the trim goes back.
Plasterboard walls
We check that the board around the gap is sound. Crumbling edges are cleaned back before the sealant goes in.
Landlords, agents and businesses in Strachur
If you manage several properties in or around Strachur, several properties can go on one quote. Send us the addresses and the work at each, and photos by email help.
We work for landlords and letting agents as well as homeowners. Sealant work between tenants keeps a property looking cared for before the next move-in.