Hampshire · England
Fire Rated Sealant in Shalden
We cover Shalden for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.
- Gaps where walls meet ceilings or slabs
- Unsealed gaps around fire door frames
- Gaps left after a refit or conversion
Fire rated sealant in Shalden, done properly
Ordinary silicone or decorators’ caulk in a fire-stopping gap is not a fire-rated seal. We cut out the wrong material and reseal with a fire-rated product tested for that kind of gap. Typical jobs include old fire sealant that has split or come away and unsealed gaps where pipes and cables go through a wall, on linear gaps, plasterboard & masonry and flats & HMOs.
In a village or hamlet like Shalden, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. They all have washrooms, kitchens and service openings that need the right sealant.
All our work is covered by a one-year guarantee, wherever you are in Hampshire.
- Place
- Shalden (GU34)
- Wider area
- Hampshire
- Cover
- A year, on every job
- Quote
- A clear price before work begins
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Commercial buildings in Shalden
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Rented homes near Alton station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Shalden is about 2 miles north-west of Alton, in Hampshire. Anywhere in GU34, we cover fire rated sealant for homes and businesses. 683 places in Hampshire are on our list. You can also see our page for Reading, about 19 miles away.
Postcode districts we cover here for fire rated sealant: GU34. Local streets include Southwood Road, Stancombe Lane and Shalden Lane, all of which we cover. Other places close to Shalden include Shalden Green (1 mile north), Thedden (2 miles south-west), Beech (2 miles south), Bentworth (2 miles south-west) and Southrope (2 miles north-west). Larger places within reach include Basingstoke (8 miles north-west), Farnborough (13 miles north-east), Fleet (10 miles north-east), Aldershot (12 miles north-east), Petersfield (12 miles south) and Yateley (14 miles north-east).
Landmarks near Shalden
For rail, the closest station is Alton station, about 2.1 miles south-east. Nearby you will also find Gliding Heritage Centre (1.3 miles north-west) and Alton Community Hospital (2.3 miles south). Green spaces nearby include Holybourne Hill.
When to call us in Shalden
In some buildings the gap was filled with the wrong thing in the first place: ordinary expanding foam, standard silicone or decorators’ caulk where a fire-rated seal was needed. It may look fine, but it isn’t a fire-rated seal.
Any of these means the joints need attention:
- Door frames with gaps between frame and wall
- Open joints along the top of partitions
- Holes left by a change of layout
- Sealant items on a fire risk assessment action list
For buildings such as Church of St Peter and St Paul, service openings in its walls need the right fire-rated sealant, as in any building.
Questions to ask before you book
- Whether they seal over old material or remove it
- How the colour is chosen
- Whether they’re fully insured
- How the surfaces are prepared before sealing
How it works
All our tools and materials come with us in the van. Once we have agreed what’s being done, the area is protected and the work begins. It normally takes a few hours for a handful of gaps, and longer for a whole building. In a small place like Shalden, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products.
Before we arrive
- Try not to wet indoor joints just before the visit
- Let us know about earlier repairs to the joints
- Let us know about parking restrictions
Ask for a quote
If you’re in Shalden and need fire rated sealant, phone 0345 464 0079 or drop us an email. Tell us what the problem is and where, and we will agree the price before any work begins.
Advice
Landlords, agents and businesses in Shalden
Hotels need rooms back in use, so the work can be planned room by room. Hotel work is part of what we do, alongside homes and businesses.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
What sealant work can’t fix
Before booking, it’s worth knowing the limits too:
- Large holes that need a different fire-stopping system
- Walls or floors that weren’t built to resist fire
- Certifying a building or signing off its fire safety
If you’re not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Surfaces we seal
- Service penetrations
- Plasterboard & masonry
- Linear gaps
- Pipe & cable gaps
- Flats & HMOs
- Door frames
Why act early in Shalden
Squirting in whichever sealant is nearest doesn’t make a fire seal. A fire-rated product only performs as tested when it’s installed to its tested detail, which is why we match the product and the method to each gap. In a small place like Shalden, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you are unsure, call 0345 464 0079 or email us for an honest opinion and a quote.
Why us?
- Any old sealant cut out fully, not covered over
- Approved under the ARBOMaster scheme
- We’re fully insured
- Neat joints and a tidy finish
See our cost guide or our reviews.
What the job involves on each surface
Service penetrations
Wherever a service goes through a fire-resisting wall or floor, there’s a gap around it. We seal it with a product tested for that service and gap size.
Flats and HMOs
Converted houses often have gaps around old and new services. We seal the ones on your specification with a tested product.
Questions from Shalden
Is Shalden in your area for fire rated sealant?
Yes. We work across London and the South East, and Shalden is part of that. Just phone 0345 464 0079 or drop us an email with a few details of the job.
Do you cover smaller places like Shalden?
Yes, Shalden is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
What’s the difference between intumescent and fire-rated sealant?
Intumescent means it swells when heated. It’s one type of fire-rated sealant; which product suits depends on the gap, the substrate and the service.
How long does the job take?
Most jobs take a few hours for a handful of gaps, and longer for a whole building, including preparation and clearing up. Your quote will say how long we expect yours to take.
What do you need from me for a quote?
A short description and the location, plus pictures if you have them. We’ll ask anything else we need to know.
What do you put in the joint?
Products from Arbo and Everbuild, among others, picked for each joint. We’ll tell you what we’re using and why.
Can you tell me how many minutes the seal will last?
Ratings and certificates are not something we issue. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves, and we install to them.
Can new sealant go over the old?
No. Fresh sealant does not stick to old sealant, and anything trapped underneath, including mould and water, stays there. We remove it all first.
More services for Shalden
What affects the quote in Shalden
Some jobs are bigger than they look, and some smaller. What affects the quote:
- How easy the joints are to reach
- How many rooms, windows or areas are involved
- When we can work, for business premises
- The product the joint needs
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Helping us quote
There’s no need for technical detail. It helps if you can tell us:
- The problem you’ve noticed
- How many joints, rooms or windows are involved
- Pictures of the joints, sent by email
- Whether it has been sealed before
We quote each job on its own. Just phone 0345 464 0079 or drop us an email with the details, and photos are welcome.