Hampshire · England
Fire Rated Sealant in Yateley
Professional fire rated sealant in and around Yateley, with every bit of old sealant taken out first.
- Gaps where walls meet ceilings or slabs
- Fire stopping disturbed by later work
- Cracked or shrunken fire-rated sealant
About our fire rated sealant in Yateley
We can work through a building room by room or floor by floor. That record is useful for your files and for whoever looks at the building next. We are often asked to deal with damaged fire sealant left by other trades and ordinary sealant used where a fire-rated product was needed, across pipe & cable gaps, flats & HMOs and door frames.
Shared washrooms take far more use than a home bathroom, and their sealant shows it, and fire-rated joints need restoring whenever new services are run through a wall. For a building in Yateley, we plan timings around how it’s used.
We stand behind the work with a 12-month guarantee.
- Place
- Yateley (GU46)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Landlord and commercial work in Yateley
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
DIY versus a professional finish
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.
How to look after the new joints
A little care helps the new joints last. We recommend:
- Look in service cupboards and ceiling voids from time to time
- Keep the record of products and locations with your fire safety documents
- Tell trades working in the building that fire seals must be put back
- Get damaged fire seals looked at promptly
Look at the sealed gaps as part of your routine walk-rounds. Look for cracks, gaps or sealant that has been cut or pulled out and have them put right.
A flagged gap shouldn’t wait for the next assessment. Get it sealed and recorded so the item can be closed.
What the job involves on each surface
Service penetrations
New gaps tend to show up where services have been added. Old or unsuitable filler comes out before the right sealant goes in with backing where the detail needs it.
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. They’re sealed with a fire-rated sealant over backing where the detail calls for it.
Towns and villages near Yateley
More services for Yateley
Workplaces and buildings in Yateley
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you let a flat or house near Sandhurst station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Community buildings like Church of St Peter are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
Yateley is about 4 miles north-west of Farnborough, in Hampshire. If you need fire rated sealant in Yateley, it’s easy to get a quote: please ring 0345 464 0079 or email us. We cover Hampshire from our Crawley base, Yateley included. Yateley is one of 683 places in Hampshire we cover. There’s also a page for Reading, about 10 miles away.
Here we cover the GU46 postcode area for fire rated sealant. Whether your property is on Hall Lane, Calcott Park and Wistaria Lane or a nearby road, our applicators can take on the job. You’ll find Yateley on the B3272, so it’s easy for us to get to with everything needed for fire rated sealant. Other places close to Yateley include Darby Green (1 mile east), Eversley Cross (1 mile north-west), Little Sandhurst (1 mile north-east), Minley (2 miles south) and Eversley Centre (2 miles west). Within a short drive, we also cover Basingstoke (13 miles south-west), Farnborough (4 miles south-east), Fleet (4 miles south), Aldershot (7 miles south-east), Alton (14 miles south-west) and Tadley (13 miles west).
Landmarks near Yateley
In Yateley, that means homes and buildings near Dog & Partridge pub, Cranford Park Primary and Ambarrow Court. For rail, the closest station is Sandhurst station, roughly 1.3 miles north-east of the centre. Nearby you will also find Staff College Museum (3.6 miles east) and Pinewood Hospital (3.6 miles north-east). Not far away are Horseshoe Lake and Hitches Hill.
What affects the cost of fire rated sealant
The quote reflects the job in front of us. We look at:
- The size of the job
- The product the joint needs
- Any working-time requirements on site
- Whether old sealant or filler has to be cut out
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
What we need to know
When you call or email, it’s useful to know:
- Whether it’s a home or a business
- The problem you’ve noticed
- If someone has resealed it before
- The rough size of the job
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, phone 0345 464 0079 or email us.
How it works
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. For most jobs that takes from a few hours to a few days, depending on the number of gaps and the access and we leave things clean and tidy. For a job in Yateley, we need access to where the work is and somewhere nearby to park. If the job is outside, mention gates, side access and anything above ground floor.
- We plan the order of work and access, floor by floor or flat by flat.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- We record what was done and flag anything that needs a different system.
Before we arrive
- Let us know about earlier repairs to the joints
- Try not to wet indoor joints just before the visit
- Tell us if parking is tricky
Getting a quote
Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job, and we’ll come back to you with a quote.
Advice
Do you need fire rated sealant in Yateley?
Lots of unsealed gaps appear long after the building was completed. Electricians, plumbers and data installers drill through walls and ceilings and the hole round the new service isn’t always sealed again.
These are the problems we’re asked about most:
- Open holes round services passing through fire walls
- Gaps filled with a product that isn’t fire-rated
- Gaps left after a refit or conversion
- Open joints along the top of partitions
For site and facilities teams at buildings such as Yateley School, fire-stopping around service openings should be restored whenever new services go in.
Before booking anyone
- What the cure time is
- What product goes in the joint
- What preparation is included
- What guarantee comes with the work
Yateley: your questions answered
What guarantee comes with fire rated sealant in Yateley?
All our work, in Yateley and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.
I let a flat near Sandhurst station. Can you help?
Yes, landlords and agents are among the people we work for. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we’ll give you a clear price.
Should I try DIY first?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
What does fire rated sealant cost?
We do not publish prices, because the cost depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Do you offer different sealant colours?
In most cases you can choose. We’ll explain which colours are available and agree one before work begins.
Is standard sealant good enough for a fire gap?
No. Ordinary silicone, caulk or foam isn’t tested as fire stopping. If it’s been used, we remove it and use the right product.
Do you provide details of the products used?
Yes. Every gap we seal is listed with the product used so it’s there for the next inspection.
Will it make a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.