Surrey · England
Fire-rated sealant in Seale, Surrey
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Seale and across Surrey. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Cracked or shrunken fire-rated sealant
- Joints picked up in a fire-stopping survey
- Gaps filled with a product that isn’t fire-rated
What sealant work cannot fix
Sealant is not the answer to every problem, and we will tell you before any work starts. It will not solve:
- Fire doors that need new seals, closers or hardware
- Issuing a fire rating or certificate for a building
- Big openings where sealant alone is not the tested solution
If in doubt, phone 0345 464 0079 or drop us an email and we’ll say what we think.
Where we work in Seale
- Door frames
- Linear gaps
- Plasterboard & masonry
- Flats & HMOs
- Service penetrations
- Pipe & cable gaps
How we handle fire rated sealant in Seale
A fire seal relies on being installed the way it was tested: correct depth, correct backing and a product suited to the surfaces. That is the part we focus on. We are often asked to deal with door frames with gaps between frame and wall and holes left by a change of layout, across pipe & cable gaps, plasterboard & masonry and door frames.
Work in a small place like Seale is planned ahead, journey included, so it can be fitted around guests, customers or events where possible.
There’s a 12-month guarantee on every job, whatever its size.
- Place
- Seale (GU10)
- Wider area
- Surrey
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
Signs you need fire rated sealant in Seale
In some buildings the gap was filled with the wrong thing in the first place: ordinary expanding foam, standard silicone or decorators’ caulk where a fire-rated seal was needed. It may look fine, but it isn’t a fire-rated seal.
Common reasons people contact us are:
- Ordinary sealant used where a fire-rated product was needed
- Damaged fire sealant left by other trades
- Open holes round services passing through fire walls
- Open gaps behind door architraves
Community buildings like Church of St Laurence are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
What to look for in a quote
- Whether all the old sealant comes out first
- What the cure time is
- What guarantee comes with the work
- How the colour is chosen
The process
You do not need to clear the whole room or building, just the space around the work. Everything nearby is protected, and the work takes from a few hours to a few days, depending on the number of gaps and the access in most cases. Somewhere like Seale needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Any non-fire-rated filler is removed and the gap cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used.
Preparing for the visit
- Mention any parking rules near the property
- For indoor joints, keep the area dry beforehand if you can
- Mention if the joints have been sealed before
Get a quote
For a quote, phone 0345 464 0079 or email us and tell us where the job is and what the problem looks like. You will have a clear quote before work begins.
Related advice
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. A few tips:
- Never patch a fire seal with standard sealant
- Check risers, ceiling voids and cupboards during building checks
- Photograph sealed gaps before they’re covered up
- Make resealing part of every contractor’s brief
Don’t drill through or remove a fire seal without putting it back properly. New services through a sealed wall should include fire stopping in the plan.
Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes.
Other services in Seale
Seale questions
Do you cover Seale for fire rated sealant?
Yes, Seale is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job.
Do you cover smaller places like Seale?
Yes. Seale is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is it worth trying it myself?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.
Are you an approved applicator?
Yes. We’re an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
Can you tell me which gaps need fire stopping?
No. We follow the requirements from your assessor, designer or building control.
What information do you need?
The location, the problem and the rough size of the job. If you can, email a few photos.
Do I need to be at home?
That depends on where the joints are. For work indoors, someone needs to let us in, and for outside work we’ll agree access with you when we book.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done and we’ll quote it together.
Why deal with it now?
Paying for fire stopping that has to be redone is a false economy. Work that does not follow the tested detail may have to come out again once someone inspects it. Around Seale, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
What it costs depends on the size of the job, how much old material has to come out and access to the work. You will have a clear quote before any work starts, so you know where you stand.
Why choose Mr Mastic in Seale
- More than 20 years in sealant work
- Tidy, careful work
- A 12-month guarantee on all work
- Quality sealants from Arbo and Everbuild
Take a look at what affects the cost or what customers say.
Fire rated sealant around Seale
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Rented homes near Ash station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. If you look after a building such as St Paul's CofE Infant School & Nursery, gaps opened by contractors for new cabling are a common finding in schools and offices.
Seale is about 3 miles south-east of Aldershot, in Surrey. For fire rated sealant in and around Seale, please ring 0345 464 0079 or email us for a quick quote. We are based in Crawley and cover Surrey. We cover 395 towns and villages across Surrey. You can also see our page for Reading, roughly 19 miles from Seale.
We cover every part of GU10 for fire rated sealant. Streets in the area include Elstead Road, School Hill and Wood Lane, all of which we cover. Neighbouring places we cover for fire rated sealant include Sandy Cross (1 mile west), Tongham (1 mile north-west), The Sands (1 mile south-west), Ash Green (1 mile north) and Ash (2 miles north). Larger places within reach include Guildford (6 miles east), Woking (9 miles north-east), Camberley (8 miles north), Farnham (4 miles west), Frimley (6 miles north) and Haslemere (9 miles south).
Local landmarks in Seale
In Seale, that means homes and buildings near The Connaught School, Ash Manor School and The White Hart pub and the streets around them. The closest station to Seale is Ash station, about 1.9 miles north. Other landmarks nearby include Guildford Hospital (4.8 miles east) and Farnham Castle (3.7 miles west). Green spaces nearby include Runfold Wood and Hog's Back.
How we quote for fire rated sealant
Every job gets its own quote. These are the things that affect it:
- How easy the joints are to reach
- Whether old sealant or filler has to be cut out
- Whether there’s mould to deal with
- The amount of work
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
Asking for a quote
To help us quote quickly, let us know:
- Roughly how big the job is
- Photos by email, if that’s easy
- Access, such as stairs, a lift or height
- If it’s domestic, commercial or a hotel
If you’re in Seale and need fire rated sealant, phone 0345 464 0079 or email us. Tell us what the problem is and where, and you’ll get a clear quote before any work starts.