Hampshire · England
Fire-rated sealant in Sarisbury, Hampshire
Fire rated sealant for Sarisbury, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Gaps where walls meet ceilings or slabs
- Old fire sealant that has split or come away
- Open gaps behind door architraves
Fire rated sealant for homes and businesses in Sarisbury
Filling a fire-stopping gap with standard silicone or caulk does not make it fire-rated. We cut out the wrong material and reseal with a fire-rated product tested for that kind of gap. Common call-outs are for door frames with gaps between frame and wall and gaps left after a refit or conversion, across linear gaps, pipe & cable gaps and flats & HMOs.
In a smaller place like Sarisbury, commercial jobs tend to be smaller buildings: a pub, a surgery, a school, a shop or a few business units. Each needs the same care with its sealant as any larger building.
A one-year guarantee comes as standard, so you’re not left on your own once the job is done.
- Location
- Sarisbury (SO31)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quote
- A clear price before work begins
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Common questions in Sarisbury
Is Sarisbury in your area for fire rated sealant?
Yes. Our work covers London and the South East, and Sarisbury is part of that. Just call 0345 464 0079 or send us an email with a few details of the job, and we will send you a clear quote.
Can you help a landlord with a rental near Swanwick station?
Yes, we work for letting agents and landlords. Just ring 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear quote.
Do you certify the fire stopping?
That isn’t something we state or certify. The requirement comes from your assessor, designer or building control, and we apply a product tested for it, recording the locations and products.
Are you fully insured?
Yes, we are fully insured for every job we do.
Do the sealants smell?
There can be a smell while the sealant cures. Opening a window helps.
Is it messy?
Tidy work is part of the job. Nearby surfaces are protected, and the area is left clean when we finish.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Does someone need to be in?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
DIY versus a professional finish
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Why act early in Sarisbury
Doing it once, properly, beats doing it twice. Work that doesn’t follow the tested detail may have to come out again once someone inspects it. Homes in smaller places like Sarisbury can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.
A failed joint rarely gets cheaper to fix by waiting. If you are unsure, phone 0345 464 0079 or drop us an email for an honest opinion and a quote.
What you get with us
- 180+ five-star Google reviews
- Anti-fungal sanitary silicone in wet areas
- Full insurance on every job
- A 12-month guarantee on all work
Read how sealant jobs are priced and customer reviews.
What the job involves on each surface
Plasterboard walls
Many fire-resisting walls in flats, offices and conversions are plasterboard. We use a product tested in that kind of wall for each gap size.
Service penetrations
Different services need different details: metal pipes, cables and plastic pipes aren’t treated the same. We follow the manufacturer’s tested detail for each.
Fire rated sealant in Sarisbury: local notes
If you run a hotel, guest house or holiday let in a coastal place like Sarisbury, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Community buildings like Church of St Paul are part of the picture too: gaps around pipes and cables are worth checking after any building work there. Letting a property close to Swanwick station? Then any gap left by new services in shared walls should be closed with a fire-rated product. Managing a site like Sarisbury Church of England Junior School? Then gaps opened by contractors for new cabling are a common finding in schools and offices.
Sarisbury is about 3 miles south of Hedge End, in Hampshire. For fire rated sealant in and around Sarisbury, it’s easy to get a quote: please phone 0345 464 0079 or email us. We cover Hampshire from our Crawley base, Sarisbury included. We cover 683 towns and villages across Hampshire. There’s also a page for Southampton, roughly 6 miles from Sarisbury.
Postcode districts we cover here for fire rated sealant: SO31. If you need fire rated sealant at a property on Woodlands Close, Bridge Road and Painswick Close or a nearby road, our applicators can take on the job. We also cover Swanwick (1 mile north-west), Park Gate (1 mile east), Sarisbury Green (1 mile south-west), Locks Heath (1 mile south-east) and Lower Swanwick (1 mile north-west). Within a short drive, we also cover Winchester (13 miles north), Gosport (7 miles south-east), Havant (13 miles east), Eastleigh (7 miles north-west), Fareham (4 miles east) and Horndean (12 miles east).
Landmarks near Sarisbury
Around Sarisbury, our work takes us to homes and buildings near Brookfield Community School and Language College and The Old Ship Inn and the streets around them. The closest station to Sarisbury is Swanwick station, roughly 0.7 miles east of the centre. A little further out are Coldeast (under half a mile south) and Bursledon Brickworks Industrial Museum (1 mile north). The countryside around Sarisbury includes Swanwick Lakes.
Quotes for fire rated sealant in Sarisbury
Every job gets its own quote. These are the things that affect it:
- How easy the joints are to reach
- When we can work, for business premises
- The number and length of the joints
- How many areas need sealing
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
Asking for a quote
What to tell us when you ask for a quote:
- The rough size of the job
- Pictures of the joints, sent by email
- The address or postcode of the job
- If it’s domestic, commercial or a hotel
There’s no standard price list. Instead, your job gets its own clear quote. To arrange one, phone 0345 464 0079 or email us.
Landlords, agents and businesses in Sarisbury
Housing providers, facilities teams and property managers book us too. Several sites can go on one quote, and we’re fully insured.
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
How the visit works
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. Most jobs then take a few hours for a handful of gaps, and longer for a whole building. In a smaller place like Sarisbury, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Where the tested detail needs backing or fill, we fit it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Finally, we list where we worked and what we used, for your records.
How to prepare
- Clear the area around the work
- Tell us about any water getting in
- Mention if the joints have been sealed before
How to get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email pictures if that’s easy.
Read more
Keeping the joints in good condition
A little care helps the new joints last. Our advice:
- Look in service cupboards and ceiling voids from time to time
- Store the list of sealed gaps with your building paperwork
- Check whether a sealant can be painted before decorating over it
- Make resealing part of every contractor’s brief
Keep the record we give you with the building’s fire safety documents. It helps whoever checks the building next.
It’s easiest to seal gaps while they’re few and easy to reach. Leave them and each new job adds another hole and the job gets bigger.