Hampshire · England
Fire Rated Sealant in Warsash
Fire rated sealant in Warsash from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Gaps around pipes and cables through fire-resisting walls
- Gaps left after a refit or conversion
- Gaps flagged on a fire risk assessment
Fire rated sealant in Warsash, done properly
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. One new cable or pipe can leave a gap that nobody goes back to seal. Those are the gaps we close, using a tested fire-rated product. We are often asked to deal with damaged fire sealant left by other trades and open gaps behind door architraves, on door frames, linear gaps and flats & HMOs.
In a smaller place like Warsash, commercial jobs tend to be smaller buildings: a pub, a surgery, a school, a shop or a few business units. The work is the same as in a big building, just on a smaller scale.
You are covered for a year from the day we finish. If anything isn’t right with it, ring 0345 464 0079 or send us an email.
- Location
- Warsash (SO31)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Price
- A clear price before work begins
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
What affects the quote in Warsash
Jobs vary more than people expect. What affects the quote:
- Any working-time requirements on site
- How easy the joints are to reach
- How many rooms, windows or areas are involved
- The old material and how stubborn it is
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we will explain what it covers.
What to tell us for a quote
Photos by email are helpful but not essential. Please mention:
- Whether it’s a home or a business
- Roughly how big the job is
- Photos by email, if that’s easy
- Any previous sealing or DIY work
Every job is quoted individually. Simply phone 0345 464 0079 or email us and describe the job, and photos are welcome.
Towns and villages near Warsash
What else we do in Warsash
What sealant work cannot fix
Before booking, it’s worth knowing the limits:
- Big openings where sealant alone isn’t the tested solution
- Construction that doesn’t provide fire resistance on its own
- Deciding what fire stopping a building needs
If you’re not sure, just ring 0345 464 0079 or drop us an email and we will give you a straight answer.
Joints and surfaces we work on
- Service penetrations
- Linear gaps
- Door frames
- Plasterboard & masonry
- Flats & HMOs
- Pipe & cable gaps
Commercial buildings in Warsash
For seaside hotels, guest houses and holiday lets around Warsash, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
If you look after a building such as Hook-With-Warsash Church of England Academy, fire-stopping around service openings should be restored whenever new services go in. If you look after a church, hall or community building such as Church of St Mary, gaps around pipes and cables are worth checking after any building work there. For landlords with property near Swanwick station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Warsash is about 4 miles west of Fareham, in Hampshire. Warsash gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. 683 places in Hampshire are on our list, from the larger towns to small villages. Southampton is on our list too, about 6 miles from Warsash.
Here we cover the SO31 postcode area for fire rated sealant. Local streets include Church Road, Wild Rose Crescent and Willow Herb Close, and we cover them all. Neighbouring places we cover for fire rated sealant include Sarisbury Green (1 mile north), Locks Heath (1 mile north-east), Hook (1 mile south-east), Hook Park Estate (1 mile south) and Abshot (1 mile south-east). Within a short drive, we also cover Winchester (14 miles north), Gosport (7 miles south-east), Havant (13 miles east), Eastleigh (8 miles north), Fareham (4 miles east) and Horndean (13 miles east).
Around Warsash
We work in homes and buildings around Brookfield Community School and Language College, Hamble Common and Jolly Farmer Public House. For rail, the closest station is Swanwick station, about 1.6 miles north-east. A little further out are Coldeast (0.9 miles north) and Bursledon Brickworks Industrial Museum (2.1 miles north). For a walk, there’s Holly Hill Woodland Park.
Surface by surface
Door frames
The gap between a door frame and the wall around it needs sealing as well as the door itself. We seal that gap with a fire-rated sealant suited to the frame and wall.
Plasterboard walls
Plasterboard partitions are common in flats, offices and conversions. We use a product tested in that kind of wall for each gap size.
Looking after it afterwards
So the new joints stay in good condition:
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Ask every contractor to reseal any fire stopping they disturb
- Include fire stopping when you schedule refits
- Flag any open gap you spot round a pipe or cable
Look at the sealed gaps as part of your routine walk-rounds. Watch for cracking, gaps or seals that have been disturbed and get them seen to.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Closing it is normally a straightforward job.
How it works
The work is kept neat and contained to the joints we are treating, so you can carry on as normal. Expect the work to take a few hours for a handful of gaps, and longer for a whole building, and we explain the cure time before we leave. Parking around Warsash is usually easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
How to prepare
- For indoor joints, keep the area dry beforehand if you can
- Tell us about access, such as stairs, a lift or high-level joints
- Let us know if you’ve seen damp or leaks
Getting a quote
Need a quote? Please ring 0345 464 0079 or send us an email and tell us about the job. We’ll explain what we’d do and give you a clear quote before we start.
Related advice
Leave it or put it right?
A quick fill with any sealant to hand isn’t fire stopping. A fire-rated product only performs as tested when it’s installed to its tested detail, so both the product and the method matter. Homes in smaller places like Warsash can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
Combining jobs into one visit normally makes better use of the time than several visits, so tell us about everything that needs sealing. We will give you a clear price for the lot.
What you get with us
- We leave the area clean and tidy
- Rated 4.9 stars on Google
- More than 20 years in sealant work
- Anti-fungal sanitary silicone in wet areas
Take a look at how sealant jobs are priced or what customers say.
Common questions in Warsash
Is Warsash in your area for fire rated sealant?
Yes, Warsash is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or email us with a few details of the job.
Do you work for landlords with property near Swanwick station?
Yes, landlords and agents are among the people we work for. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we’ll send you a clear quote.
Is it OK to seal over old sealant?
No. New silicone won’t bond to old silicone, and anything trapped underneath, including mould and water, stays there. We remove it all first.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we will tell you what we are using.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done.
Will you assess my building’s fire safety?
No, assessment is not something we do. When your assessor or designer has set out what’s needed, we’ll quote for the sealant work on it.
Do you offer different sealant colours?
We will suggest a colour to suit the surroundings, from white and clear to greys and other shades. The choice depends on the product the joint needs.
Landlords, agents and businesses in Warsash
We work for letting agents and landlords as well as householders. Resealing between tenancies keeps a property looking cared for.
If you manage several properties in or around Warsash, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs.