East Sussex · England

Fire-rated sealant in Ridgewood, East Sussex

Our applicators work in Ridgewood on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.

  • Fire stopping disturbed by later work
  • Joints picked up in a fire-stopping survey
  • Holes left by a change of layout

Fire rated sealant in Ridgewood

About our fire rated sealant in Ridgewood

Door frame gaps, linear joints and holes around services all have their own details. We check the size and the substrate before choosing the product, then the sealant goes in to the depth the product’s details set. If you have gaps flagged on a fire risk assessment and standard silicone or caulk in a fire-stopping gap, we can help.

In a smaller place like Ridgewood, commercial jobs tend to be smaller buildings: a pub, a surgery, a school, a shop or a few business units. The work is the same as in a big building, just on a smaller scale.

The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we’ll put it right.

Location
Ridgewood (TN22)
Region
East Sussex
Guarantee
12 months on all our work
Quote
A clear quote up front
Call
0345 464 0079
Updated
26 October 2026
Eleven members of the Mr Mastic team standing in front of branded white vans

DIY versus a professional finish

Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.

A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

How the visit works

The work is kept neat and contained to the area we’re working on. Expect the work to take a few hours for a handful of gaps, and longer for a whole building, and we explain the cure time before we leave. A visit to Ridgewood is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.

  1. We go through the gaps on your list or survey and check each one’s size and substrate.
  2. We remove any old or unsuitable filler and clean the gap.
  3. Where the tested detail needs backing or fill, we fit it.
  4. The sealant goes in to the depth its detail sets, then it’s tooled off.
  5. Finally, we list where we worked and what we used, for your records.

Preparing for the visit

  • Clear the area around the work
  • On commercial sites, let us know about site rules
  • For indoor joints, keep the area dry beforehand if you can

How to get a quote

Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we’ll come back to you with a quote.

Get a quick quote

Related advice

Aftercare tips

Simple care keeps the joints in good condition. Our advice:

  • Don’t fill fire-stopping gaps with ordinary foam or silicone
  • Tell trades working in the building that fire seals must be put back
  • Do not paint over fire sealant until it has cured
  • Include fire stopping when you schedule refits

Leave the sealant to cure fully before painting near it. Not every fire-rated sealant takes paint and we will tell you which one you have.

Any job that breaks through a wall or ceiling should include resealing. Doing it at the time avoids leaving gaps behind.

Why deal with it now?

If an assessor has flagged gaps, it makes sense to close them before the next review. Getting them done and written up means you can show the action was taken. Homes in smaller places like Ridgewood can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.

Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. You will know the price before we begin.

Why us?

  • Trusted Arbo and Everbuild sealants
  • Domestic, commercial and hotel work
  • Fully insured
  • 20+ years of sealant experience

Read our cost guide or what customers say.

Your questions about fire rated sealant in Ridgewood

Do you work in hotels near Ridgewood?

Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.

I let a flat near Uckfield station. Can you help?

Yes. We work for landlords and agents as well as homeowners. Just phone 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear price.

Can you give us a record of the work?

Yes. Locations and products are written up when we finish. If you need pictures or a set layout, ask when you get a quote.

Will the old sealant be removed?

Yes. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.

What does fire rated sealant cost?

There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.

Is the work guaranteed?

Yes, for a year. If anything is not right with the work within the year, let us know and we will sort it.

Can I do it myself?

You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.

How long does the job take?

As a guide, most jobs take from a few hours to a few days, depending on the number of gaps and the access. Larger jobs naturally take longer.

When to call us in Ridgewood

In some buildings the gap was filled with the wrong thing in the first place: general-purpose foam, everyday silicone or caulk in a place that needed a tested fire seal. It may look fine, but it is not a fire-rated seal.

Most people get in touch when they notice something like this:

  • Cracked or shrunken fire-rated sealant
  • Standard silicone or caulk in a fire-stopping gap
  • Seals cut through by electricians, plumbers or data installers
  • Linear gaps at the head of walls

Managing a site like Harlands Primary School? Then fire-stopping around service openings should be restored whenever new services go in.

What to look for in a quote

  • What happens if they find a problem under the old sealant
  • How long the guarantee is
  • Which colour the sealant will be
  • Is the old sealant removed completely?

10 questions to ask before you book

Honest limits

Honest advice matters more to us than a booking, so here’s what sealant can’t fix:

  • A wall that is not a fire-resisting element to begin with
  • Large holes that need a different fire-stopping system
  • Certifying a building or signing off its fire safety

Not sure which it is? You can phone 0345 464 0079 or drop us an email and we will tell you honestly.

Where we work in Ridgewood

  • Door frames
  • Flats & HMOs
  • Linear gaps
  • Pipe & cable gaps
  • Service penetrations
  • Plasterboard & masonry

Surface by surface

Masonry and concrete

Core-drilled and broken-out holes in concrete are often irregular. We check the gap size around the service to make sure it suits the product.

Plasterboard walls

Holes in plasterboard are often cut roughly for services. Gaps that are too big for sealant alone need a different detail.

What fire rated sealant looks like in Ridgewood

There are hotels and other places to stay in and around Ridgewood. Hotel work can be planned room by room, with out-of-hours working where needed. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.

For buildings such as St Saviour, gaps around pipes and cables are worth checking after any building work there. Letting a property close to Uckfield station? Then any gap left by new services in shared walls should be closed with a fire-rated product.

Ridgewood is about 1 mile south of Uckfield, in East Sussex. For fire rated sealant in and around Ridgewood, please ring 0345 464 0079 or send us an email for a quick quote. We cover East Sussex from our Crawley base, Ridgewood included. Ridgewood is one of 289 towns and villages in East Sussex where we work for fire rated sealant. Our Brighton page covers work nearby.

All of TN22 is covered for fire rated sealant, from the main roads to the quietest streets. Streets in the area include New Road, Lewes Road and Wares Road, all of which we cover. If you’re just outside Ridgewood, we cover Little Horsted (1 mile south-west), Isfield (2 miles south-west), Budlett's Common (2 miles north), Rose Hill (2 miles south-west) and Maresfield (3 miles north). Further out, we also cover Eastbourne (14 miles south-east), Seaford (12 miles south), Lewes (7 miles south-west), Hailsham (9 miles south-east), Crowborough (7 miles north-east) and Newhaven (11 miles south).

Local landmarks in Ridgewood

Locally, jobs take us to homes and businesses close to Uckfield College, The Highlands pub and Hempstead Meadow and the streets around them. The closest station to Ridgewood is Uckfield station, roughly 0.8 miles north. A little further out are Uckfield Community Hospital (0.7 miles north-east) and Tickerage Castle (2.4 miles east). The countryside around Ridgewood includes Brickfield Meadow.

Map of Ridgewood © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job