Moray · Scotland
Fire-rated sealant in Rathven, Moray
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Rathven, backed by a 12-month guarantee. Ask us for a quote.
- Seals cut through by electricians, plumbers or data installers
- Ordinary sealant used where a fire-rated product was needed
- Linear gaps at the head of walls
Fire rated sealant for homes and businesses in Rathven
A fire seal relies on being installed the way it was tested: correct depth, correct backing and a product suited to the surfaces. That’s the part we focus on. If you have open joints along the top of partitions and gaps flagged on a fire risk assessment, we can help.
Commercial work around smaller Scottish places tends to mean hotels, guest houses, schools and halls rather than offices. Each needs sound sealant in its washrooms and kitchens, and fire-rated joints kept in good order.
Our work is backed for twelve months, in Rathven and everywhere else we cover.
- Place
- Rathven (AB56)
- Wider area
- Moray
- Guarantee
- One year on every job
- Quote
- A clear price before work begins
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
How to look after the new joints
After the cure time, these simple habits help:
- Plan fire stopping into any work that goes through walls or floors
- Store the list of sealed gaps with your building paperwork
- Make resealing part of every contractor’s brief
- Take photos of fire stopping before ceilings or boxing go back
Follow the cure time we give you before decorating over the sealant. Some fire-rated sealants can be painted and some cannot.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is usually a straightforward job.
Other services in Rathven
Why deal with it now?
Paying for fire stopping that has to be redone is a false economy. Work that does not follow the tested detail may have to come out again once someone inspects it. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we will explain what it covers.
Why Rathven clients choose us
- ARBOMaster approved applicator
- We never seal over old sealant
- Domestic, commercial and hotel work
- Over 20 years’ experience
See our cost guide and customer reviews.
Signs you need fire rated sealant in Rathven
A lot of fire stopping is out of sight: in ceiling voids, service risers and behind boxing. Out of view, damage sits unnoticed until someone inspects.
The problems people usually mention when they call include:
- Cracked or shrunken fire-rated sealant
- Gaps where walls meet ceilings or slabs
- Ordinary sealant used where a fire-rated product was needed
- Fire stopping disturbed by later work
Community buildings like St Peter's Church and Old Burial-Ground are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
What to look for in a quote
- Is the old sealant removed completely?
- How long the guarantee is
- Which sealant they’ll use, and why
- Who does the work, and how experienced they are
What fire rated sealant looks like in Rathven
If you run a hotel, guest house or holiday let in a coastal place like Rathven, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details; we do not certify buildings or carry out fire risk assessments.
Managing a site like Buckie High School? Then gaps opened by contractors for new cabling are a common finding in schools and offices.
Rathven is about 1 mile east of Buckie, in Moray. Whether you are in the middle of Rathven or further out, we cover fire rated sealant for every kind of property. Rathven is one of 58 places in Moray we cover. Aberdeen is on our list too, about 47 miles from Rathven.
Jobs for fire rated sealant in AB56 works the same way as everywhere else we cover. We also cover the places around Rathven: Portessie (1 mile north), Ianstown (1 mile west), Buckie (1 mile west), Findochty (2 miles north-east) and Arradoul (2 miles south-west). We also work in nearby towns such as Elgin (14 miles west), Lossiemouth (13 miles west), Keith (9 miles south), Ashgrove (14 miles west), Portknockie (3 miles north-east) and Cullen (4 miles east). For island and remote addresses, the job takes a little more planning.
What’s near Rathven
A little further out are Findochty Castle (1.3 miles north-east) and Seafield Hospital (1.8 miles west).
Should I try it myself first?
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so tell us about it when you ask for a quote.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Your questions about fire rated sealant in Rathven
Do you cover smaller places like Rathven?
Yes, we do. We work across all of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do Scottish building rules affect fire-rated sealant work in Rathven?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Is there a guarantee?
Yes. All our work carries a one-year guarantee.
Is standard sealant good enough for a fire gap?
No. Where a fire-rated seal is needed, it has to be a product tested for that use fitted to the maker’s details.
How long will you be here?
Typically it takes anything from a few hours to several days, depending on how many gaps there are. Larger jobs naturally take longer, and we will say how long yours will take.
Do you do fire sealant around door frames?
Yes, where the gap suits a sealant detail. We seal the frame-to-wall gap, not the door itself, and we will mention anything we notice about the door.
Do you work in flats, HMOs and commercial buildings?
Yes. We regularly work in flats, HMOs, schools and offices while they’re in use and we plan access around the people using them. Out-of-hours work can be arranged if that suits the building.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we will tell you what we are using.
What the job involves on each surface
Linear gaps
Some linear gaps have to cope with movement as well as fire. The product and depth are chosen to suit both from the manufacturer’s details.
Service penetrations
Wherever a service goes through a fire-resisting wall or floor, there’s a gap around it. We seal it with a product tested for that service and gap size.
How we quote for fire rated sealant
Some jobs are bigger than they look, and some smaller. What affects the quote:
- How many areas need sealing
- The type of sealant required
- How much there is to do
- Any mould that needs treating
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all play a part.
What we need to know
Photos help, but a description is a good start. Try to tell us:
- The rough size of the job
- Where the job is, and your postcode
- What the problem is, such as mould, gaps, leaks or cracking
- A few pictures by email, if you can
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will talk you through the work.
What we do, step by step
Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, carry out the job and tidy away. It usually takes anything from a few hours to several days, depending on how many gaps there are. Somewhere like Rathven may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- We put in whatever backing or fill the product detail specifies.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Locations and products are noted so you have them on file.
Getting ready for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Mention any leaks or damp you’ve noticed
- For business premises, tell us about site rules or sign-in
How to get a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. Whenever you’re ready, drop us a line at info@mrmastic.co.uk.