Hampshire · England
Fire Rated Sealant in Passfield
Fire rated sealant across Passfield and nearby, with every bit of old sealant taken out first and a one-year guarantee.
- Unsealed gaps around fire door frames
- Fire stopping disturbed by later work
- Fire seals that have cracked with movement
Do you need fire rated sealant in Passfield?
Door frames are a common weak spot. The architrave hides the gap between frame and wall, so it’s easy to leave unsealed when doors are changed.
Signs it’s time to call us include:
- Linear gaps at the head of walls
- Gaps around pipes and cables through fire-resisting walls
- Cracked or shrunken fire-rated sealant
- New service routes left unsealed after building work
Managing a site like Mill Chase Academy? Then service openings in fire-resisting walls need checking after any refurbishment.
Comparing quotes
- Whether they’re fully insured
- How long to leave it before use
- Which colour the sealant will be
- What product goes in the joint
Fire rated sealant in Passfield, done properly
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. We apply intumescent and fire-rated sealants to the manufacturer’s tested details for each gap. We work on door frames, flats & HMOs and pipe & cable gaps, and people most often call us about gaps left after a refit or conversion and open joints along the top of partitions.
For a small place like Passfield, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we will put it right.
- Location
- Passfield (GU30)
- Region
- Hampshire
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
DIY sealant or a professional job?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Fire rated sealant in Passfield: local notes
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you let a flat or house near Liphook station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Passfield is about 7 miles south-east of Alton, in Hampshire. Homes, rented property, offices and hotels in Passfield can book us for fire rated sealant, old or new, large or small. The work is guaranteed for a year. Passfield is one of 683 places in Hampshire where we work. There’s also a page for Portsmouth, about 23 miles away.
We work across GU30 for fire rated sealant. Streets in the area include The Lyndons, Eleanor Close and Lynchborough Road. Neighbouring places we cover for fire rated sealant include Conford (1 mile south-east), Weavers Down (1 mile south), Liphook (2 miles south-east), Woolmer (2 miles south-west) and Longmoor (2 miles south-west). Further out, we also cover Farnborough (14 miles north), Fleet (12 miles north), Horndean (15 miles south-west), Aldershot (11 miles north), Alton (7 miles north-west) and Petersfield (8 miles south-west).
What’s near Passfield
The closest station to Passfield is Liphook station, about 2.3 miles south-east of the centre. Nearby you will also find Chase Community Hospital (1.5 miles north-west). Not far away are Deadwater Valley and Wheeler's Down.
How we quote for fire rated sealant
Every job gets its own quote. This is what makes a difference:
- How easy the joints are to reach
- The amount of work
- How many rooms, windows or areas are involved
- Any mould that needs treating
Combining jobs into one visit is normally more efficient than separate visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.
What to tell us for a quote
Photos by email are helpful but not essential. Please mention:
- Access, such as stairs, a lift or height
- Whether it’s a home or a business
- The rough size of the job
- The problem you’ve noticed
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. When it suits you, call 0345 464 0079 or drop us an email.
Landlords, agents and businesses in Passfield
Landlords and letting agents in Passfield can book us as well as homeowners. Sealant work between tenants keeps a property looking cared for.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
FAQs for Passfield
Will you come out to Passfield?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you do fire rated sealant in Passfield?
Yes. We work across London and the South East, and Passfield is part of that. Just phone 0345 464 0079 or email us with a few details of the job.
What should I tell you?
The location, the problem and the rough size of the job. Photos by email help too.
Can new sealant go over the old?
No, because it fails. The old sealant always comes out first, so the new joint bonds to clean surfaces.
Do you have insurance?
Yes. We’re fully insured, and we can confirm the details when we quote.
Do you certify the fire stopping?
Ratings and certification sit with the product’s test evidence and whoever specified the work. We apply the specified product to the manufacturer’s details and giving you a record of where it went.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
What happens on the day
The work is kept neat and contained to the area we are working on. The job normally takes a few hours for a handful of gaps, and longer for a whole building, and we tell you how long to leave it before we go. In a small place like Passfield, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Any non-fire-rated filler is removed and the faces cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used.
Before we arrive
- Tell us about any water getting in
- On commercial sites, let us know about site rules
- Keep pets and children clear of the area while we work
Ask for a quote
For fire rated sealant in Passfield, ring 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Advice
Looking after it afterwards
How long the joints last depends on use and care. Here’s what we suggest:
- File the fire-stopping record where your assessor can find it
- Photograph sealed gaps before they’re covered up
- Ask every contractor to reseal any fire stopping they disturb
- Don’t fill fire-stopping gaps with ordinary foam or silicone
Avoid covering a sealed gap with anything that is not part of the tested detail. If it needs repair, use the same type of product. We can tell you which product we used.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Sealing it early is a simple step to take.
What else we do in Passfield
Surface by surface
Door frames
We deal with the gap around the frame, not the door. Doors, seals and closers are for a door specialist, and we will say if we spot a problem with them.
Linear gaps
Some linear gaps have to cope with movement as well as fire. We choose a product and depth that suit the gap and the movement.