Hampshire · England

Fire-rated sealant in Liphook, Hampshire

Specialist fire rated sealant for Liphook: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.

  • Unsealed gaps where pipes and cables go through a wall
  • Holes left by a change of layout
  • Joints picked up in a fire-stopping survey

Fire rated sealant near Liphook

About our fire rated sealant in Liphook

Deciding which gaps need fire stopping isn’t our role; your assessor, designer or building control sets that out. Our part is applying the specified sealant carefully, to the right depth and with the right backing. Typical jobs include gaps left after a refit or conversion and gaps flagged on a fire risk assessment, across linear gaps, plasterboard & masonry and flats & HMOs.

If you run a pub, café, guest house or shop in or near Liphook, the washrooms and kitchen need the same attention as a big site.

A 12-month guarantee comes as standard, so you are not left on your own once the job is done.

Place
Liphook (GU30)
Region
Hampshire
Guarantee
12 months on all our work
Quotes
A clear quote up front
Telephone
0345 464 0079
Last updated
26 October 2026
Eleven members of the Mr Mastic team standing in front of branded white vans

FAQs for Liphook

I let a flat near Liphook station. Can you help?

Yes. We work for landlords and letting agents as well as householders, and several properties can go on one quote. You can phone 0345 464 0079 or drop us an email with the details for a clear quote.

Will you come out to Liphook?

Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.

Are you insured?

Yes. Full insurance covers our work.

What does fire rated sealant cost?

Every job is different, so each one gets its own quote. For a quick quote, phone 0345 464 0079 or drop us an email with a short description of the job.

Can I use normal mastic around a pipe through a fire wall?

No. Ordinary silicone, caulk or foam isn’t tested as fire stopping. We cut it out and reseal with a fire-rated product.

Do you certify the fire stopping?

We do not issue ratings or certificates ourselves. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves; we install to those details and record what we did.

What information do you need?

Let us know what needs doing and where, with photos by email if possible. If we need more, we’ll ask.

Is the work guaranteed?

Yes, for a year. If anything is not right with the work within the year, let us know and we’ll sort it.

Different surfaces, different methods

Plasterboard walls

Service holes in plasterboard are often rough and oversized. Gaps that are too big for sealant alone need a different detail.

Masonry and concrete

For masonry and concrete, we use a product tested in that substrate. The gap is cleaned of dust first so the seal has something sound to bond to.

How we quote for fire rated sealant

For a quick quote, just ask. The main things that affect it are:

  • Whether the work is at height
  • Whether there’s mould to deal with
  • The number and length of the joints
  • The number of rooms or windows

The cost depends on how much there is to do, how hard the old material is to remove and how easy the joints are to reach. You’ll have a clear quote before any work starts, so you know where you stand.

Asking for a quote

When you call or email, it’s useful to know:

  • Photos by email, if that’s easy
  • The rough size of the job
  • What’s wrong with the joints now
  • Where the property is

Asking for a quote is easy: let us know the job and the location and its rough size. Photos by email help us understand the job, and we will come back to you with a quote.

How the visit works

Every visit runs the same way: we check the joints, protect the area around them, do the work and tidy away. Most jobs take from a few hours to a few days, depending on the number of gaps and the access. In a smaller place like Liphook, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.

  1. Before starting, we go through the specification or action list with you.
  2. We measure every gap and note what it’s in and what passes through.
  3. Unsuitable material such as ordinary foam or silicone is cut out and the gap cleaned.
  4. We fit backing where needed and apply the fire-rated sealant to depth.
  5. We hand over a list of locations and products.

Getting ready for the visit

  • Let us know about parking restrictions
  • Tell us about access, such as stairs, a lift or high-level joints
  • Try not to wet indoor joints just before the visit

How to get a quote

Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we’ll explain what’s involved.

Get a quick quote

Related advice

Keeping the joints in good condition

No joint lasts for ever, but care makes a real difference. A few tips:

  • Include fire stopping when you schedule refits
  • Make resealing part of every contractor’s brief
  • Check whether a sealant can be painted before decorating over it
  • Look in service cupboards and ceiling voids from time to time

Do not add foam, filler or ordinary sealant over a fire seal. If it needs repair, use the same type of product. We can tell you which product we used.

Open gaps do not only matter in a fire: they also let noise, draughts and sometimes pests through. Sealing them early helps on every front.

Landlords, agents and businesses in Liphook

Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll give you a quote.

Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we are fully insured for the work.

Do you need fire rated sealant in Liphook?

Many open fire-stopping gaps are made after the building is finished. Electricians, plumbers and data installers drill through walls and ceilings and the hole they leave doesn’t always get resealed.

People usually contact us when they notice one of these:

  • Open gaps behind door architraves
  • Open holes round services passing through fire walls
  • Standard silicone or caulk in a fire-stopping gap
  • Seals cut through by electricians, plumbers or data installers

If you look after a building such as Bohunt School, fire-stopping around service openings should be restored whenever new services go in.

Before you book anyone

  • How hidden problems are handled
  • Whether they’re fully insured
  • What the cure time is
  • What preparation is included

How to choose a mastic man

What we cannot put right

Before you book, it’s worth knowing the limits too:

  • Construction that doesn’t provide fire resistance on its own
  • Big openings where sealant alone isn’t the tested solution
  • Fire doors that need new seals, closers or hardware

If in doubt, phone 0345 464 0079 or send us an email and we will say what we think before you book.

What we seal

  • Flats & HMOs
  • Linear gaps
  • Door frames
  • Plasterboard & masonry
  • Service penetrations
  • Pipe & cable gaps

Fire rated sealant around Liphook

In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details. There are hotels and other places to stay in and around Liphook. Hotel work can be planned room by room, with out-of-hours working where needed.

Letting a property close to Liphook station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. Community buildings like St Mary's Church Centre are part of the picture too: gaps around pipes and cables are worth checking after any building work there.

Liphook is about 8 miles north-east of Petersfield, in Hampshire. We provide fire rated sealant to homeowners, landlords and businesses in Liphook and the surrounding area. We cover 683 towns and villages across Hampshire. Portsmouth is on our list too, around 22 miles away.

We work across GU30 for fire rated sealant and the streets around it. You will find streets such as London Road, Station Road and Childerstone Close. Nearby, we also carry out fire rated sealant in Weavers Down (1 mile west), Conford (1 mile north-west), Passfield (2 miles north-west), Milland (3 miles south) and Longmoor (3 miles west). Within a short drive, we also cover Farnborough (15 miles north), Fleet (14 miles north), Horndean (15 miles south-west), Aldershot (12 miles north), Alton (9 miles north-west) and Petersfield (8 miles south-west).

Around Liphook

Typical jobs here are in homes near The Green Dragon Public House and Liphook Infant School and the streets around them. The nearest railway station is Liphook station, about 0.5 miles south. Other landmarks nearby include Chase Community Hospital (3.3 miles north-west). Open spaces near Liphook include Lynchmere Commons and Wheeler's Down.

Map of Liphook © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job