West Sussex · England

Fire-rated sealant in Nutbourne, West Sussex

Fire-stopping gaps in Nutbourne need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.

  • Gaps filled with a product that is not fire-rated
  • Open holes round services passing through fire walls
  • Gaps left after a refit or conversion

Trusted fire rated sealant in Nutbourne

How we handle fire rated sealant in Nutbourne

Landlords, managing agents and facilities teams use us for the sealant items on a fire risk assessment. Send us the list or the survey and we’ll quote for the fire-rated sealant work on it. Typical jobs include unsealed gaps where pipes and cables go through a wall and standard silicone or caulk in a fire-stopping gap, across service penetrations, linear gaps and plasterboard & masonry.

Work in a small place like Nutbourne is planned ahead, journey included, so it can be fitted around guests, customers or events where possible.

The work is covered for a year after we finish. If there’s a problem with it, please ring 0345 464 0079 or send us an email.

Where
Nutbourne (RH20)
Wider area
West Sussex
Guarantee
12 months on all our work
Price
A clear quote up front
Call
0345 464 0079
Last updated
26 October 2026
The Mr Mastic team in navy uniforms in front of three Mr Mastic vans

How to look after the new joints

Simple care keeps the joints in good condition. Our advice:

  • Ask every contractor to reseal any fire stopping they disturb
  • Keep pictures of seals that will be hidden
  • Check risers, ceiling voids and cupboards during building checks
  • Include fire stopping when you schedule refits

Don’t add foam, filler or ordinary sealant over a fire seal. Repairs should use a matching fire-rated product. We can tell you which product we used.

Leave a fire-stopping gap open and smoke can move through the building much more easily. Sealing it early is a simple step to take.

When something else is needed

It helps to know what we cannot do too:

  • Issuing a fire rating or certificate for a building
  • A wall that isn’t a fire-resisting element to begin with
  • Fire doors that need new seals, closers or hardware

Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly before you book.

Joints and surfaces we work on

  • Door frames
  • Plasterboard & masonry
  • Pipe & cable gaps
  • Flats & HMOs
  • Linear gaps
  • Service penetrations

What happens on the day

On the day, we look over the joints with you first. Surfaces next to the work are protected before we start. Most jobs take anything from a few hours to several days, depending on how many gaps there are. In a small place like Nutbourne, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. Access to each area is agreed so the work can run in order.
  2. Old, damaged or unsuitable sealant is removed.
  3. Gaps are cleaned of dust and loose material.
  4. The fire-rated or intumescent sealant is applied and tooled to the tested detail.
  5. We record what was done and flag anything that needs a different system.

Getting ready for the visit

  • Let us know about earlier repairs to the joints
  • Keep children and pets away from the work area
  • Clear items away from the joints we’re working on

Get a quote

To get a quote, ring 0345 464 0079 or email us with the location and a short description of the problem. You’ll have a clear quote before work begins.

Get a price

Advice

Leave it or put it right?

Leaving a gap until a refurbishment comes round can mean years with it open. Sealing the gap now is a contained job on its own and needn’t wait for anything else. Older cottages and farmhouses around Nutbourne can have timber floors and frames, and water through a failed joint can rot timber if it’s left.

A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.

Why Nutbourne customers choose us

  • Sanitary silicone with an anti-fungal additive in wet areas
  • Neat joints and a tidy finish
  • A 12-month guarantee on all work
  • An ARBOMaster approved applicator

See how sealant jobs are priced and our reviews.

Questions from Nutbourne

Do you work for landlords with property near Pulborough station?

Yes, rental work is part of what we do. You can call 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before we start.

Do you cover smaller places like Nutbourne?

Yes, Nutbourne is covered. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.

Do you do fire sealant around door frames?

Yes. We often seal open gaps hidden behind the architrave. Doors, seals and closers need a door specialist.

Should I try DIY first?

For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.

Can you do several jobs on one visit?

Yes. More than one area can be quoted together.

Can I use normal mastic around a pipe through a fire wall?

No. It looks sealed but will not perform as fire stopping. Use a product tested for that gap and service and we can apply it for you.

Is there a guarantee?

Yes. Every job comes with a one-year guarantee.

Where is Mr Mastic based?

We’re based in Crawley, West Sussex, and we work across South East England, London and Scotland.

What the job involves on each surface

Masonry and concrete

Core-drilled and broken-out holes in concrete are often irregular. We measure the gap at its widest point to make sure it suits the product.

Service penetrations

New gaps tend to show up where services have been added. We clean out what’s there and reseal to the right depth with backing where the detail needs it.

When to call us in Nutbourne

Gaps also open up as buildings move: a seal that cracks or pulls away leaves a path for smoke. Damage from cleaning, knocks and maintenance adds to it.

Most people get in touch after spotting one of these:

  • Holes left by a change of layout
  • Ordinary sealant used where a fire-rated product was needed
  • Damaged fire sealant left by other trades
  • Open gaps behind door architraves

For buildings such as St Mary's Church, older buildings that have had new heating or wiring often have service gaps worth checking.

What to look for in a quote

  • How the joint is cleaned and prepared
  • What the cure time is
  • Is VAT in the price?
  • Which colour the sealant will be

10 questions to ask before you book

Should I try it myself first?

Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.

If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.

Commercial buildings in Nutbourne

In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.

Rented homes near Pulborough station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. If you look after a building such as West Chiltington Community Primary School, service openings in fire-resisting walls need checking after any refurbishment.

Nutbourne is about 3 miles north of Storrington, in West Sussex. Wherever you are in the RH20 postcode area, our applicators can take on fire rated sealant. Our West Sussex coverage runs to 371 places, and Nutbourne is one of them. There’s also a page for Crawley, roughly 16 miles from Nutbourne.

Postcode districts we cover here for fire rated sealant: RH20. If you need fire rated sealant at a property on Stream Lane and Nutbourne Road or a nearby road, our applicators can take on the job. We also cover Marehill (1 mile south-west), Broomershill (1 mile north-west), West Chiltington (1 mile east), Gay Street (1 mile north) and West Chiltington Common (1 mile south-east). We also work in nearby towns such as Horsham (10 miles north-east), Worthing (10 miles south), Bognor Regis (15 miles south-west), Burgess Hill (15 miles east), Littlehampton (11 miles south) and Shoreham-by-Sea (12 miles south-east).

Near you in Nutbourne

Around Nutbourne, our work takes us to homes and buildings near The Rising Sun Inn. Nutbourne’s nearest station is Pulborough station, about 2 miles west. A little further out are Amberley Castle (4.6 miles south-west) and The Storrington And District Museum (3.1 miles south). For a walk, there’s Amberley Wildbrooks RSPB Reserve.

Map of Nutbourne © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job