West Sussex · England

Fire Rated Sealant in Broomershill

Intumescent and fire-rated sealant around gaps, frames and service penetrations for homeowners, landlords and businesses in Broomershill. Fully insured, ARBOMaster approved and guaranteed for a year.

  • Gaps flagged on a fire risk assessment
  • Linear gaps at the head of walls
  • New service routes left unsealed after building work

Fire rated sealant for Broomershill homes and businesses

About our fire rated sealant in Broomershill

Until it’s heated, intumescent sealant behaves like an ordinary sealant; in a fire it expands into the joint. The right product depends on the gap size, the substrate and what passes through, so we follow the tested detail for each one. If you’re dealing with gaps flagged on a fire risk assessment and gaps filled with a product that isn’t fire-rated, we can help, on flats & HMOs, door frames and pipe & cable gaps alike.

For a small place like Broomershill, the journey and timings are agreed in advance, so it can be fitted around guests, clients or events where possible.

The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we will sort it.

Place
Broomershill (RH20)
Wider area
West Sussex
Guarantee
One year on every job
Quote
Quoted before any work starts
Phone
0345 464 0079
Page updated
26 October 2026
Mr Mastic applicators lined up beside the company vans, one holding a sealant gun

How it works

All our tools and materials come with us in the van, so you do not need to buy or prepare anything. Once we have agreed what’s being done, the area is protected and the work begins. It normally takes anything from a few hours to several days, depending on how many gaps there are. Somewhere as small as Broomershill, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. Before starting, we go through the specification or action list with you.
  2. Each gap is measured and its substrate and service noted.
  3. Unsuitable material such as ordinary foam or silicone is cut out and the gap cleaned.
  4. The specified fire-rated sealant goes in over any backing its detail requires.
  5. We hand over a list of locations and products.

Before we arrive

  • Tell us about any water getting in
  • Keep children and pets away from the work area
  • For indoor joints, keep the area dry beforehand if you can

Ask for a quote

We quote each job on its own, so the first step is telling us about yours. Simply ring 0345 464 0079 or email us and describe the job and send pictures if you have them.

Ask for a quote

Read more

Why act early in Broomershill

A quick fill with any sealant to hand isn’t fire stopping. Fire-rated products are tested in set gap sizes, depths and substrates, which is why we match the product and the method to each gap. Around Broomershill, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.

There are no prices on our website, because each job is priced on what it involves. For a quick quote, please ring 0345 464 0079 or send us an email and we’ll talk you through it.

Why us?

  • Arbo and Everbuild products
  • Full insurance on every job
  • Tidy, careful work
  • Rated 4.9 stars on Google

Take a look at how sealant jobs are priced or what customers say.

For landlords and businesses

We work for landlords and letting agents as well as householders. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.

Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.

What we are called out for in Broomershill

A lot of fire stopping is out of sight: above ceilings, inside risers and behind panels. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.

People generally contact us when they notice something like this:

  • Seals cut through by electricians, plumbers or data installers
  • Ordinary sealant used where a fire-rated product was needed
  • Open joints along the top of partitions
  • Gaps flagged on a fire risk assessment

Rented homes near Pulborough station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product.

Before you book anyone

  • How the surfaces are prepared before sealing
  • How much experience the applicator has
  • Whether you can choose the colour
  • What insurance they hold

10 questions to ask before booking

Looking after it afterwards

Good habits help new joints last longer. Our tips:

  • Get damaged fire seals looked at promptly
  • Look in service cupboards and ceiling voids from time to time
  • Plan fire stopping into any work that goes through walls or floors
  • Tell trades working in the building that fire seals must be put back

Tell other trades that the gaps have been sealed, and make sure anything they disturb is resealed with a suitable product. Later work is a common cause of damaged fire stopping.

Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole and the job gets bigger.

Can I do it myself?

Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.

Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.

Questions from Broomershill

Can you do fire rated sealant in Broomershill?

Yes. Our work covers London and the South East, and Broomershill is part of that. You can ring 0345 464 0079 or drop us an email and let us know what needs doing, and we will give you a clear quote.

Do you work for landlords with property near Pulborough station?

Yes, landlords and agents are among the people we work for. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we’ll give you a clear price.

What’s the difference between intumescent and fire-rated sealant?

An intumescent material expands when it’s heated. Intumescent sealants are a type of fire-rated sealant.

What fire rating will the seal have?

We don’t certify fire stopping or quote ratings. Our part is installing the specified product to its tested details and list the locations and products for you.

Is there any odour?

There can be a smell while the sealant cures. Opening a window helps.

Are you ARBOMaster approved?

Yes. We’re approved under the ARBOMaster scheme.

Can you tell me which gaps need fire stopping?

No. That’s for a fire risk assessor, designer or building control. Our job is applying the sealant to their specification.

Where is Mr Mastic based?

We’re based in Crawley, and we cover South East England, London and all of Scotland.

Workplaces and buildings in Broomershill

Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.

Community buildings like The Parish Church of St Mary are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building. If you look after a building such as St Mary's Church of England Primary School, fire-stopping around service openings should be restored whenever new services go in.

Broomershill is about 10 miles south-west of Horsham, in West Sussex. If you need fire rated sealant in Broomershill, please phone 0345 464 0079 or send us an email for a quick quote. We are based in Crawley and cover West Sussex, Broomershill included. Across West Sussex, we cover 371 places, Broomershill among them. For nearby work, see our Crawley page (17 miles or so).

Jobs for fire rated sealant in RH20 is quoted and booked the same way as anywhere else. If you are just outside Broomershill, we cover Codmore Hill (1 mile north-west), Marehill (1 mile south-east), Nutbourne (1 mile south-east), North Heath (1 mile north) and Gay Street (1 mile north-east). Within a short drive, we also cover Horsham (10 miles north-east), Worthing (11 miles south), Bognor Regis (15 miles south-west), Chichester (15 miles south-west), Littlehampton (11 miles south) and Shoreham-by-Sea (13 miles south-east).

Landmarks near Broomershill

Typical jobs here are in homes near The Red Lion Public House. The nearest railway station is Pulborough station, roughly 1.3 miles south-west of the centre. A little further out are Coates Castle (4.4 miles west) and The Storrington And District Museum (3.8 miles south-east). Not far away are The Mens.

Map of Broomershill © OpenStreetMap contributors

Surface by surface

Linear gaps

Long, narrow gaps appear where walls meet slabs and ceilings. We seal them to the tested detail, with backing where it’s needed.

Door frames

Our work is the joint between frame and wall. The door leaf, its seals and closer need a door specialist and we will mention anything we notice.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job