Kent · England

Fire-rated sealant in Northbourne, Kent

Specialist fire rated sealant for Northbourne: careful preparation, the right product and tidy work. Call for a quick quote.

  • Cracked or shrunken fire-rated sealant
  • Gaps where walls meet ceilings or slabs
  • New service routes left unsealed after building work

Fire rated sealant in Northbourne

How we handle fire rated sealant in Northbourne

Until it’s heated, intumescent sealant behaves like an ordinary sealant; in a fire it expands into the joint. Which product suits a gap depends on its width, the materials either side and what runs through it. We’re often asked to deal with gaps where walls meet ceilings or slabs and gaps around pipes and cables through fire-resisting walls, across door frames, pipe & cable gaps and plasterboard & masonry.

For holiday lets, converted business premises or a community building near Northbourne, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.

A 12-month guarantee comes with the work, just as it does everywhere we cover.

Place
Northbourne (CT14)
Wider area
Kent
Cover
A year, on every job
Quotes
A clear price before any work starts
Telephone
0345 464 0079
Updated
26 October 2026
Mr Mastic applicators lined up beside the company vans, one holding a sealant gun

DIY sealant or a professional job?

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.

Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.

Surface by surface

Flats and HMOs

Conversions generally leave a mix of old and new service holes. The gaps on your list are sealed with a fire-rated product and the locations noted.

Masonry and concrete

Brick, block and concrete walls and floors are sealed with products tested in masonry. The gap is cleaned of dust first.

Workplaces and buildings in Northbourne

Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.

For buildings such as Church of St Augustine, service openings in its walls need the right fire-rated sealant, as in any building. For landlords with property near Walmer station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. Managing a site like Northbourne Church of England Primary School? Then service openings in fire-resisting walls need checking after any refurbishment.

Northbourne is about 2 miles west of Deal, in Kent. Northbourne gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Our Kent coverage runs to 922 places, and Northbourne is one of them. We also work in Chelmsford, about 51 miles from Northbourne.

Here we cover the CT14 postcode area for fire rated sealant. You’ll find streets such as Deal Road, Coulson Grove and Mill Lane, and we cover them all. We also cover the places around Northbourne: Marley (1 mile north), Great Mongeham (1 mile south-east), Finglesham (1 mile north), Sholden Meadows (1 mile east) and Sholden (1 mile east). Larger places within reach include Canterbury (12 miles west), Margate (11 miles north), Dover (6 miles south), Folkestone (12 miles south-west), Ramsgate (9 miles north) and Broadstairs (11 miles north).

What’s near Northbourne

Around Northbourne, our work takes us to homes and buildings near Castle Community College, Hare & Hounds pub and Betteshanger Park and the streets around them. The closest station to Northbourne is Walmer station, about 2.2 miles south-east of the centre. A little further out are Deal Castle (2.8 miles east) and Kent Museum of the Moving Image (2.7 miles east). The countryside around Northbourne includes Monk's Wall nature reserve.

Map of Northbourne © OpenStreetMap contributors

FAQs for Northbourne

Is Northbourne in your area for fire rated sealant?

Yes, Northbourne is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job, and we’ll send you a clear quote.

Will you come out to Northbourne?

Yes, Northbourne is covered. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.

What should I tell you?

A short description and the location, plus photos if you have them. If we need more, we’ll ask.

Can I choose the sealant colour?

Most of the time, yes. We will explain which colours are available and agree one before work begins.

Can I use normal mastic around a pipe through a fire wall?

No. Ordinary silicone, caulk or foam isn’t tested as fire stopping. If it’s been used, we remove it and use the right product.

What sealant do you use?

Products from Arbo and Everbuild, among others, picked for each joint. We will tell you what we’re using and why.

Do you have insurance?

Yes, we are fully insured for domestic and commercial work.

Can you tell me how many minutes the seal will last?

We don’t issue ratings or certificates ourselves. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves; we install to those details and record what we did.

Why act early in Northbourne

Fire-rated sealants need more care than everyday sealant. Depth, backing and surface preparation all affect how a seal performs, and we work to the product details every time. Where a wall is exposed, as many are in small places like Northbourne, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.

Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You will know the price before we begin.

Why book with us

  • 180+ five-star Google reviews
  • A 12-month guarantee on all work
  • Any old sealant cut out fully, not covered over
  • Anti-fungal silicone where joints get wet

Take a look at our cost guide or what customers say.

How it works

There is not much for you to do on the day. Point us to the joints and we’ll get on with it. The job generally takes from a few hours to a few days, depending on the number of gaps and the access. For a village or hamlet like Northbourne, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. Access to each area is agreed so the work can run in order.
  2. Old, damaged or unsuitable sealant is removed.
  3. Dust and loose debris are cleaned from each gap.
  4. The fire-rated or intumescent sealant is applied and tooled to the tested detail.
  5. Locations and products are written up and any gaps unsuitable for sealant are flagged.

Before we arrive

  • Keep children and pets away from the work area
  • Where the joints are inside, avoid wetting them before we arrive
  • Mention any sign-in or site rules at work premises

Ask for a quote

It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. Whenever you’re ready, ring 0345 464 0079 or drop us an email.

Get a price

Related advice

When something else is needed

We’d rather tell you now than do work that won’t last, so here’s what sealant cannot put right:

  • Large holes that need a different fire-stopping system
  • Fire doors that need new seals, closers or hardware
  • Construction that doesn’t provide fire resistance on its own

If in doubt, ring 0345 464 0079 or email us and we will say what we think.

What we seal

  • Service penetrations
  • Linear gaps
  • Plasterboard & masonry
  • Flats & HMOs
  • Pipe & cable gaps
  • Door frames

Looking after it afterwards

No joint lasts for ever, but care makes a real difference. Our tips:

  • Keep pictures of seals that will be hidden
  • Ask every contractor to reseal any fire stopping they disturb
  • Check whether a sealant can be painted before decorating over it
  • Report cracked or damaged seals as soon as you notice them

Follow the cure time we give you before decorating over the sealant. Not every fire-rated sealant takes paint, so ask us which we used.

A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is usually a straightforward job.

Landlord and commercial work in Northbourne

Letting agents and landlords in Northbourne can book us as well as householders. Sealant work between tenants is a simple way to keep a property in good order.

Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job