Glasgow · Scotland
Newbank Fire Rated Sealant
We cover Newbank for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly and a 12-month guarantee.
- Cracked or shrunken fire-rated sealant
- Damaged fire sealant left by other trades
- Open holes round services passing through fire walls
Fire rated sealant in Newbank, done properly
Deciding which gaps need fire stopping is not our role; that comes from your fire risk assessor, designer or building control. Our part is applying the specified sealant carefully, to the right depth and with the right backing. Common call-outs are for open joints along the top of partitions and door frames with gaps between frame and wall, on pipe & cable gaps, service penetrations and door frames.
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. In Newbank, as anywhere, fire-rated sealant goes in to the product’s tested details and washroom sealant is chosen to cope with heavy use.
All our work comes with a one-year guarantee, wherever you are in Glasgow.
- Where
- Newbank (G31, G40, G32)
- Wider area
- Glasgow
- Cover
- One year on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Keeping the joints in good condition
After the cure time, these simple habits help:
- Store the list of sealed gaps with your building paperwork
- Do not paint over fire sealant until it has cured
- Take photos of fire stopping before ceilings or boxing go back
- Make resealing part of every contractor’s brief
Tell other trades that the gaps have been sealed, and ask them to reseal anything they cut through. Later work is a common cause of damaged fire stopping.
An open gap isn’t only a fire issue: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.
Surface by surface
Plasterboard walls
Plasterboard partitions are common in flats, offices and conversions. We use a product tested in that kind of wall for the gap we are sealing.
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. They’re sealed with a fire-rated sealant over backing where the detail calls for it.
When something else is needed
We’ll always be straight with you, so here’s what sealant can’t fix:
- A wall that is not a fire-resisting element to begin with
- Openings too large for sealant, which need batts, boards or another system
- Problems with the door itself rather than the gap around the frame
If in doubt, drop us a line at info@mrmastic.co.uk and we’ll say what we think before you book.
Surfaces we seal
- Linear gaps
- Flats & HMOs
- Pipe & cable gaps
- Service penetrations
- Door frames
- Plasterboard & masonry
DIY versus a professional finish
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
What we do, step by step
You do not need to clear the whole room or building before we come, just the space around the work. Everything nearby is protected, and the work takes a few hours for a handful of gaps, and longer for a whole building for a typical job. Many homes in Scotland’s cities are tenement flats, reached through a shared close and up a common stair. For a job in Newbank, tell us the floor, how the door entry system works and where we can park nearby.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Mention if the joints have been sealed before
- Tell us about any water getting in
Ask for a quote
There’s no standard price list, because every job is different. Instead, we give you a clear price for your job. To get started, email us at info@mrmastic.co.uk.
Read more
Why deal with it now?
Fire-rated sealants are less forgiving than ordinary ones. How it’s installed changes how it performs, so we follow the maker’s details on every gap. In a tenement flat in Newbank, a failed seal is rarely just your problem: water can reach the flat below, and gaps in shared walls or fire-stopping affect the whole stair.
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference.
Why us?
- Trusted Arbo and Everbuild sealants
- Fully insured
- Anti-fungal sanitary silicone in wet areas
- Approved under the ARBOMaster scheme
Take a look at how sealant jobs are priced and what customers say.
Fire rated sealant around Newbank
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we don’t certify buildings or carry out fire risk assessments. Newbank has hotels and guest accommodation in and around it. Hotel work can be planned room by room, with out-of-hours working where needed.
For landlords with property near Duke Street station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Schools such as St Mungo's Academy are buildings too, and fire-stopping around service openings should be restored whenever new services go in.
Newbank is about 3 miles east of Glasgow, in Glasgow. Whether you are in the middle of Newbank or further out, fire rated sealant is available for homes and businesses alike. Our Glasgow coverage runs to 183 places, and Newbank is one of them.
Jobs for fire rated sealant in G31, G40 and G32 works the same way as everywhere else we cover. Fire rated sealant is available to properties on Yate Road, Arrol Road and Perth Lane. We also cover the places around Newbank: Barrowfield (1 mile west), Camlachie (1 mile north-west), Haghill (1 mile north), Gallowgate (1 mile north-west) and Bridgeton (1 mile west). We also work in nearby towns such as Glasgow (3 miles west), Hillhead (4 miles north-west), Dowanhill (4 miles north-west), Woodlands (3 miles north-west), Woodside (3 miles north-west) and North Kelvinside (4 miles north-west).
Landmarks near Newbank
In Newbank, that means homes and buildings near St Andrew's Secondary School, Parkhead Library and 1 pub and the streets around them. The closest station to Newbank is Duke Street station, about 0.8 miles north-west. Nearby you’ll also find The Forge Shopping Centre (under half a mile north) and Parkhead Hospital (within half a mile north-east). For a walk, there’s Cathkin Braes and Hogganfield Loch.
Quotes for fire rated sealant in Newbank
There’s no set price list, because jobs vary so much. The quote depends on:
- The type of sealant required
- How easy the joints are to reach
- The amount of work
- How many rooms, windows or areas are involved
What you pay reflects the work, not a rough estimate. That’s why we ask about the job first and give you a clear quote before work begins.
What to tell us for a quote
When you contact us, these details help:
- Any access issues, like height or stairs
- Photos by email, if that’s easy
- Where the property is
- If someone has resealed it before
Every job is quoted individually, so start by telling us what you need. Just email us at info@mrmastic.co.uk with the details.
Also near Newbank
What else we do in Newbank
Common questions in Newbank
Are the rules for fire-rated sealant different in Scotland?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We don’t certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Do you work for hotels and guest houses in Newbank?
Yes, hospitality work, including hotels, is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
Can I do it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Are you fully insured?
Yes. We are fully insured, with over 20 years’ experience in sealant work.
Do you cover Newbank?
Yes, we do. Our applicators work in Newbank, and the service is the same as everywhere else.
Do you carry out fire risk assessments?
No. Your fire risk assessor, designer or building control decides that. Our job is applying the sealant to their specification.
How much does fire rated sealant cost in Newbank?
Size, access and the old material all affect the cost. Call for a quick quote and we’ll talk you through it.
Will the old sealant be removed?
Yes, every time. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.