Aberdeenshire · Scotland
Muchalls Fire Rated Sealant
Fire rated sealant across Muchalls and nearby, with every bit of old sealant taken out first.
- Open gaps behind door architraves
- Damaged fire sealant left by other trades
- Fire seals that have cracked with movement
Fire rated sealant in Muchalls, done properly
Door frame gaps, linear joints and holes around services all have their own details. We check the size and the substrate before choosing the product, then the sealant goes in to the depth the product’s details set. If you have old fire sealant that has split or come away and gaps around pipes and cables through fire-resisting walls, we can help, whatever the surface.
Work in a place like Muchalls is planned ahead, journey included, so it can be fitted around bookings or opening times where possible.
There’s a 12-month guarantee on every job, large or small.
- Location
- Muchalls (AB39)
- Wider area
- Aberdeenshire
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Keeping the joints in good condition
After the cure time, these simple habits help:
- Report cracked or damaged seals as soon as you notice them
- Don’t fill fire-stopping gaps with ordinary foam or silicone
- Keep photos of seals that will be hidden
- Make resealing part of every contractor’s brief
Do not add foam, filler or ordinary sealant over a fire seal. If it needs repair, use the same type of product. We can tell you which product we used.
Open gaps do not only matter in a fire: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.
Work for landlords, hotels and businesses
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
Workplaces and buildings in Muchalls
If you run a hotel, guest house or holiday let in a coastal place like Muchalls, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details, though we do not certify buildings or do fire risk assessments.
Rented homes near Portlethen station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. For buildings such as Saint Ternan's Church, older buildings that have had new heating or wiring often have service gaps worth checking.
Muchalls is about 9 miles south of Aberdeen, in Aberdeenshire. Muchalls gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 161 places across Aberdeenshire. There’s also a page for Aberdeen, roughly 9 miles from Muchalls.
Jobs for fire rated sealant in AB39 is quoted and booked the same way as anywhere else. If you need fire rated sealant at a property on Pheppie Road, Dunnyfell Road and Monduff Road or a nearby road, we can help. Neighbouring places we cover for fire rated sealant include Newtonhill (1 mile north-east), Chapelton (1 mile north-west), Cammachmore (2 miles north), Portlethen (3 miles north) and Portlethen Village (3 miles north-east). Within a short drive, we also cover Westhill (10 miles north-west), Stonehaven (4 miles south-west), Banchory (13 miles west), Inverbervie (13 miles south) and Elrick (10 miles north-west).
Landmarks near Muchalls
The nearest railway station is Portlethen station, roughly 3 miles north-east. Other landmarks nearby include Cowie Castle (3.4 miles south) and Kincardine Community Hospital (4.4 miles south-west). Open spaces near Muchalls include Hill of Muchalls and Portlethen Moss.
How we quote for fire rated sealant
Your quote is based on your job. We take into account:
- Whether old sealant or filler has to be cut out
- How much there is to do
- Whether there’s mould to deal with
- Working hours on commercial sites
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs. Ask us for a quote and we will explain what it covers.
Asking for a quote
To make quoting easier, let us know:
- Any previous sealing or DIY work
- The problem you’ve noticed
- If it’s domestic, commercial or a hotel
- Access, such as stairs, a lift or height
For a quote, send an email to info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We will send you a clear quote before any work starts.
Surface by surface
Service penetrations
A copper pipe, a cable and a plastic pipe can all need different fire-stopping details. Each one is sealed to the product’s tested detail.
Door frames
A door can only do its job if the gap behind its frame is sealed too. We seal that gap with a fire-rated sealant suited to the frame and wall.
DIY sealant or a professional job?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Why it’s worth doing now in Muchalls
A quick fill with any sealant to hand is not fire stopping. Fire-rated products are tested in set gap sizes, depths and substrates, so both the product and the method matter. Around Muchalls, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
The cost depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You’ll have a clear quote before any work starts.
Why Muchalls clients choose us
- 4.9 on Google from 180+ five-star reviews
- More than 20 years in sealant work
- Experience in homes, commercial sites and hotels
- Anti-fungal sanitary silicone in wet areas
Take a look at what affects the cost and our reviews.
Muchalls: your questions answered
How do Scotland’s building regulations apply to fire-rated sealant in Muchalls?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Do you cover smaller places like Muchalls?
Yes, Muchalls is covered. We work across all of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Where is Mr Mastic based?
We work from Crawley. Our applicators cover Muchalls.
Do you guarantee your work?
Yes: twelve months. If anything isn’t right with the work within the year, let us know and we will sort it.
What fire rating will the seal have?
We don’t certify fire stopping or quote ratings. We apply the specified product to the manufacturer’s details and giving you a record of where it went.
What sealant do you use?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.
Is standard sealant good enough for a fire gap?
No. Standard sealants are not made or tested to stop fire. We cut it out and reseal with a fire-rated product.
How much does fire rated sealant cost in Muchalls?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we’ll talk you through it.
What else we do in Muchalls
How the visit works
The work is kept neat and contained to the area we are working on. The job usually takes a few hours for a handful of gaps, and longer for a whole building. Somewhere like Muchalls may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
How to prepare
- Tell us about any water getting in
- Move anything stored near the joints
- Mention any sign-in or site rules at work premises
How to get a quote
If you are in Muchalls and need fire rated sealant, send an email to info@mrmastic.co.uk. Tell us what the problem is and where, and you’ll get a clear quote before work begins.