Inverclyde · Scotland
Midton Fire Rated Sealant
We cover Midton for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Open holes round services passing through fire walls
- Linear gaps at the head of walls
- New service routes left unsealed after building work
Fire rated sealant in Midton, done properly
Intumescent sealant looks much like any other sealant until it gets hot; in a fire it expands into the joint. Which product suits a gap depends on its width, the materials either side and what runs through it. Common call-outs are for door frames with gaps between frame and wall and new service routes left unsealed after building work, across service penetrations, pipe & cable gaps and flats & HMOs.
Commercial work around smaller Scottish places tends to mean hotels, guest houses, schools and halls rather than offices. Each needs sound sealant in its washrooms and kitchens, and fire-rated joints kept in good order.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Where
- Midton (PA19, PA16)
- Region
- Inverclyde
- Cover
- A year, on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Keeping the joints in good condition
Aftercare is simple, and it makes a real difference:
- Allow for resealing whenever new services are run
- Keep the record of products and locations with your fire safety documents
- Don’t paint over fire sealant until it has cured
- Look in service cupboards and ceiling voids from time to time
Tell other trades that the gaps have been sealed, and make sure anything they disturb is resealed with a suitable product. Later work is a common cause of damaged fire stopping.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Sealing it early is a simple step to take.
When it isn’t the sealant
Before booking, it’s worth knowing the limits too:
- Issuing a fire rating or certificate for a building
- Large holes that need a different fire-stopping system
- Deciding what fire stopping a building needs
If in doubt, email us at info@mrmastic.co.uk and we will say what we think.
Where we work in Midton
- Pipe & cable gaps
- Door frames
- Flats & HMOs
- Linear gaps
- Plasterboard & masonry
- Service penetrations
How it works
Before we leave, we go over the finished joints with you and explain the cure time. The work normally takes anything from a few hours to several days, depending on how many gaps there are, depending on the size of the job. In smaller Scottish places, parking is normally less of an issue than access and distance. Let us know how to find you and how to reach the joints.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out and the gap cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- We hand over a list of locations and products.
Before we arrive
- Let us know about stairs, lifts or work at height
- On commercial sites, let us know about site rules
- Keep children and pets away from the work area
Getting a quote
If you’re in Midton and need fire rated sealant, send an email to info@mrmastic.co.uk. Tell us what the problem is and where, and we will agree the price before any work begins.
Advice
Also near Midton
Other services in Midton
Fire rated sealant around Midton
If you run a hotel, guest house or holiday let in a coastal place like Midton, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we do not certify buildings or do fire risk assessments.
For buildings such as St Bartholomew's Church, gaps around pipes and cables are worth checking after any building work there. Schools such as Gourock High School are buildings too, and fire-stopping around service openings should be restored whenever new services go in. Rented homes near Gourock station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Midton is about 2 miles west of Greenock, in Inverclyde. For fire rated sealant in and around Midton, it’s easy to get a quote: please email us at info@mrmastic.co.uk. We’re based in Crawley and cover Inverclyde, Midton included. Midton is one of 19 towns and villages in Inverclyde where we work. We also work in Glasgow, around 22 miles away.
Here we cover the PA19 and PA16 postcode area for fire rated sealant. Whether your property is on Fife Road, Golf Road and Banff Road or anywhere close by, we can help. Main roads around Midton include the A770. Nearby, we also carry out fire rated sealant in Ashton (1 mile south-west), Gourock (1 mile east), Trumpethill (1 mile west), Braeside (1 mile south) and Branchton (1 mile south-east). Further out, we also cover Port Glasgow (6 miles east), Cartsdyke (3 miles east), Kilmacolm (9 miles south-east), Mid Auchinleck (7 miles east), Inverkip (3 miles south-west) and Bogston (5 miles east).
Around Midton
For rail, the closest station is Gourock station, roughly 0.8 miles north-east. Well-known places in the area include Oak Mall (2.6 miles east) and McLean Museum and Art Gallery (2.4 miles east). Not far away are Lyle Hill and Loch Loskin.
Common questions in Midton
Will you come out to Midton?
Yes. Midton is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
Do Scottish building rules affect fire-rated sealant work in Midton?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We don’t certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Can tenants book the work?
We can work for tenants, landlords or agents. Just make sure your landlord agrees.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We’ll tell you what we are using and why.
Can I use normal mastic around a pipe through a fire wall?
No. Ordinary silicone, caulk or foam isn’t tested as fire stopping. If it’s been used, we remove it and use the right product.
Do you do fire sealant around door frames?
Yes, where the gap suits a sealant detail. We seal the frame-to-wall gap, not the door itself, and we will mention anything we notice about the door.
Are you an approved applicator?
Yes. Mr Mastic is an ARBOMaster approved applicator, and we’re fully insured.
Do you certify the fire stopping?
Ratings and certification sit with the product’s test evidence and whoever specified the work. We apply the specified product to the manufacturer’s details and giving you a record of where it went.
DIY sealant or a professional job?
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
How the job changes by surface
Door frames
Our work is the joint between frame and wall. The door leaf, its seals and closer need a door specialist, and we’ll say if we spot a problem with them.
Masonry and concrete
Core-drilled and broken-out holes in concrete are often irregular. We check the gap size around the service against the product’s tested range.
Why act early in Midton
Sealant isn’t the fix for every opening. Big openings, bundles of cables and plastic pipes may need batts, collars or wraps instead. If a gap is not suitable for sealant, we’ll tell you. In a place like Midton, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.
We do not show prices on the website, because each job is priced on what it involves. Call for a quick quote.
Why Midton customers choose us
- Trusted Arbo and Everbuild sealants
- Every job guaranteed for a year
- Approved under the ARBOMaster scheme
- 180+ five-star Google reviews
See what affects the cost and what customers say.
Quotes for fire rated sealant in Midton
Your quote is based on your job. We take into account:
- Whether there’s mould to deal with
- Whether old sealant or filler has to be cut out
- Working hours on commercial sites
- Whether the work is at height
What it costs depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You’ll have a clear quote before any work starts.
What to tell us for a quote
You don’t need to know the technical terms. Just tell us:
- The rough size of the job
- How we’d reach the joints
- Any previous sealing or DIY work
- Pictures of the joints, sent by email
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.