Argyll and Bute · Scotland
Fire Rated Sealant in Kilcreggan
Fire-stopping gaps in Kilcreggan need attention? We remove the old material, prepare the joints and seal them properly.
- Open holes round services passing through fire walls
- Linear gaps at the head of walls
- Cracked or shrunken fire-rated sealant
Fire rated sealant for homes and businesses in Kilcreggan
Fire stopping only performs as intended if it’s done to the detail: the right depth, the right backing and the right product for the substrate. That detail is what we take care over. We are often asked to deal with gaps filled with a product that isn’t fire-rated and cracked or shrunken fire-rated sealant, on plasterboard & masonry, linear gaps and pipe & cable gaps.
Work in a place like Kilcreggan is planned ahead, journey included, so the job can fit around guests, residents or opening hours where possible.
Whatever the size of the job, you get the same 12-month guarantee in Kilcreggan and across Argyll and Bute.
- Where
- Kilcreggan (G84)
- Wider area
- Argyll and Bute
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
FAQs for Kilcreggan
Will you come out to Kilcreggan?
Yes, Kilcreggan is covered. We work across all of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Do Scottish building rules affect fire-rated sealant work in Kilcreggan?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We don’t certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Is it messy?
No. We protect the surfaces around the joints, and we tidy up before we go.
What do you need from me for a quote?
A short description and the location. We will ask anything else we need to know.
Can you give us a record of the work?
Yes. Every gap we seal is listed with the product used, so you have it on file.
Do you certify the fire stopping?
Ratings and certification sit with the product’s test evidence and whoever specified the work. We apply the specified product to the manufacturer’s details and list the locations and products for you.
Are you insured?
Yes. We are fully insured, with over 20 years’ experience in sealant work.
Can new sealant go over the old?
No, because it fails. The old sealant always comes out first, so the new joint bonds to clean surfaces.
What else we do in Kilcreggan
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so the work can be planned room by room. Hotel work is part of what we do, alongside homes and businesses.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Fire rated sealant around Kilcreggan
For seaside hotels, guest houses and holiday lets around Kilcreggan, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Kilcreggan has hotels and guest accommodation in and around it. For hotels, a room-by-room programme keeps most rooms in use while the work goes on.
If you look after a church, hall or community building such as Craigrownie Parish Church, service openings in its walls need the right fire-rated sealant, as in any building. Rented homes near Gourock station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Kilcreggan is about 4 miles north-west of Greenock, in Argyll and Bute. Every kind of property in Kilcreggan is covered for fire rated sealant. Every job comes with our 12-month guarantee. Our area takes in 118 places across Argyll and Bute, from the larger towns to small villages. For nearby work, see our Glasgow page (23 miles or so).
All of G84 is covered for fire rated sealant, from the main roads to the quietest streets. Whether your property is on Church Road, Barbour Road and Argyll Road or anywhere close by, our applicators can take on the job. If you’re just outside Kilcreggan, we cover Gourock (2 miles south), Midton (2 miles south), Ashton (3 miles south), Blairmore (3 miles west) and Trumpethill (3 miles south). Within a short drive, we also cover Helensburgh (4 miles east), Dunoon (4 miles south-west), Rothesay (14 miles south-west), Rhu (3 miles north-east), Garelochhead (7 miles north) and Port Bannatyne (13 miles south-west).
Near you in Kilcreggan
The nearest railway station is Gourock station, roughly 1.9 miles south. Nearby you’ll also find McLean Museum and Art Gallery (3.5 miles south-east) and Inverclyde Royal Hospital (3.1 miles south). Open spaces near Kilcreggan include Loch Loskin and Lyle Hill.
What affects the cost of fire rated sealant
You’ll get a clear quote before any work starts. It takes into account:
- The old material and how stubborn it is
- How many rooms, windows or areas are involved
- How much there is to do
- Whether there’s mould to deal with
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote.
Helping us quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Pictures of the joints, sent by email
- Any access issues, like height or stairs
- The type of property
- The address or postcode of the job
Every job is quoted individually. Just send an email to info@mrmastic.co.uk with the details.
When to call us in Kilcreggan
Lots of unsealed gaps appear long after the building was completed. New cables, pipes and data runs go through walls and ceilings and the hole they leave doesn’t always get resealed.
It’s worth asking for a quote if you see:
- New service routes left unsealed after building work
- Damaged fire sealant left by other trades
- Open gaps behind door architraves
- Standard silicone or caulk in a fire-stopping gap
Managing a site like Gourock High School? Then service openings in fire-resisting walls need checking after any refurbishment.
What your quote should include
- What product goes in the joint
- How the colour is chosen
- Who turns up on the day
- How long the guarantee is
What we do, step by step
All our tools and materials come with us in the van. Once we’ve agreed what’s being done, the area is protected and the work begins. It normally takes anything from a few hours to several days, depending on how many gaps there are. For a place like Kilcreggan, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Before we arrive
- Let us know about stairs, lifts or work at height
- Plan for the work area to be out of bounds to pets and children
- Clear items away from the joints we are working on
Getting a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few photos by email make the job easier to understand, and we will take it from there.
Advice
Different surfaces, different methods
Linear gaps
A linear joint may need to allow for movement as well as fire. We choose a product and depth that suit the gap and the movement from the manufacturer’s details.
Masonry and concrete
For masonry and concrete, we use a product tested in that substrate. We clean out dust and debris before sealing.
Aftercare tips
To keep the joints looking good and working properly:
- Flag any open gap you spot round a pipe or cable
- Keep the record of products and locations with your fire safety documents
- Look in service cupboards and ceiling voids from time to time
- Keep pictures of seals that will be hidden
Look at the sealed gaps as part of your routine walk-rounds. Watch for cracking, gaps or seals that have been disturbed and get them seen to.
When you plan work that goes through walls or ceilings, plan the fire stopping too. Doing it at the time avoids leaving gaps behind.
When something else is needed
Honest advice matters more to us than a booking, so here’s what sealant can’t fix:
- Large holes that need a different fire-stopping system
- Doors that aren’t fire doors in the first place
- Certifying a building or signing off its fire safety
If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think.
Surfaces we seal
- Flats & HMOs
- Plasterboard & masonry
- Linear gaps
- Door frames
- Pipe & cable gaps
- Service penetrations