Highland · Scotland
Fire Rated Sealant in Melvich
We cover Melvich for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Damaged fire sealant left by other trades
- Cracked or shrunken fire-rated sealant
- New service routes left unsealed after building work
For landlords and businesses
Housing providers, facilities teams and property managers book us too. Several sites can go on one quote, and we’re fully insured for the work.
Landlords and agents in Melvich can book us as well as householders. Resealing between tenancies is a simple way to keep a property in good order.
Fire rated sealant in Melvich
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. A new cable run or a replaced pipe can leave an open hole behind. Those are the gaps we close, using a tested fire-rated product. If you are dealing with open joints along the top of partitions and gaps around pipes and cables through fire-resisting walls, we can put it right.
In a smaller place like Melvich, commercial jobs are more likely to be a hotel, guest house, school, surgery or community hall than an office block. Each needs sound sealant in its washrooms and kitchens, and fire-rated joints kept in good order.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Place
- Melvich (KW14)
- Region
- Highland
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Nearby places to Melvich
Other services in Melvich
Questions from Melvich
Can you do fire rated sealant in Melvich?
Yes, Melvich is within the area we cover. We work across all of Scotland. You can send an email to info@mrmastic.co.uk and let us know what needs doing, and we’ll send you a clear quote.
Are the rules for fire-rated sealant different in Scotland?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
How long will you be here?
A typical job takes anything from a few hours to several days, depending on how many gaps there are, including the preparation. We’ll confirm how long when we quote.
Is standard sealant good enough for a fire gap?
No. A gap that needs fire stopping needs a tested fire-rated product fitted to the maker’s details.
Where is Mr Mastic based?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
What fire rating will the seal have?
We don’t issue ratings or certificates ourselves. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves; we install to those details and record what we did.
Can you fill the gap behind a fire door frame?
Yes. We seal the gap between the frame and the wall with a suitable fire-rated product. The door, its seals and closer are for a door specialist.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done and we will quote it together.
What we can’t put right
New sealant cannot fix everything, and we’d rather say so up front. It won’t solve:
- Construction that doesn’t provide fire resistance on its own
- Deciding what fire stopping a building needs
- Issuing a fire rating or certificate for a building
If you’re not sure, just drop us a line at info@mrmastic.co.uk and we will give you a straight answer before you book.
Where we work in Melvich
- Pipe & cable gaps
- Linear gaps
- Door frames
- Plasterboard & masonry
- Service penetrations
- Flats & HMOs
DIY versus a professional finish
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
When to call us in Melvich
Door frames are a common weak spot. The architrave hides the gap between frame and wall, so it can be left open when a door is replaced.
If you can see any of these, it’s time to have the joints looked at:
- Open holes round services passing through fire walls
- Fire stopping disturbed by later work
- Holes left by a change of layout
- Unsealed gaps around fire door frames
Around Melvich, as everywhere, fire rated sealant is only as good as the preparation behind it.
What your quote should include
- Who turns up on the day
- How long to leave it before use
- What product goes in the joint
- Whether you can choose the colour
Different surfaces, different methods
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We work along the whole run.
Plasterboard walls
Service holes in plasterboard are often rough and oversized. Where a hole is bigger than the sealant’s tested range, it needs another approach, and we will tell you.
How to look after the new joints
So the new joints stay in good condition:
- Flag any open gap you spot round a pipe or cable
- Check whether a sealant can be painted before decorating over it
- Don’t fill fire-stopping gaps with ordinary foam or silicone
- Check risers, ceiling voids and cupboards during building checks
Tell other trades that the gaps have been sealed, and make sure anything they disturb is resealed with a suitable product. Later work is a common cause of damaged fire stopping.
When you plan work that goes through walls or ceilings, plan the fire stopping too. Doing it at the time avoids leaving gaps behind.
What happens on the day
There isn’t much for you to do on the day. Point us to the joints and we will get on with it. The job generally takes anything from a few hours to several days, depending on how many gaps there are. For a place like Melvich, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Old or unsuitable sealant is cut out and the gap cleaned.
- We put in whatever backing or fill the product detail specifies.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- We record the locations and products used for your records.
How to prepare
- Tell us about access, such as stairs, a lift or high-level joints
- Where the joints are inside, avoid wetting them before we arrive
- Move anything stored near the joints
Ask for a quote
Want a quote for fire rated sealant? Please drop us a line at info@mrmastic.co.uk and tell us about the job. We will explain what we’d do and send you a clear quote before we start.
Advice
Fire rated sealant around Melvich
If you run a hotel, guest house or holiday let in a coastal place like Melvich, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details, though we don’t certify buildings or do fire risk assessments.
For jobs in and around Melvich, choosing the right material for each joint is as important as a tidy finish.
Melvich (Gaelic: Meabhaich) is about 15 miles west of Thurso, in Highland. Across the KW14 area, our applicators can take on fire rated sealant. 253 places in Highland are on our list, large and small.
Our applicators cover all of the KW14 postcode area for fire rated sealant and the streets around it. If you need fire rated sealant at a property on Melvich Terrace and Pentland Terrace or a nearby road, our applicators can take on the job. Other places close to Melvich include Portskerra (1 mile north-west), Strathy (3 miles west), Reay (5 miles east), Forss (11 miles east) and Am Blàran Odhar (11 miles west). If you are somewhere remote, a little more planning is needed, so let us know when you get in touch.
Local landmarks in Melvich
Open spaces near Melvich include Loch Sgiathanach.