Highland · Scotland

Gutter Sealing in Melvich

Gutter sealing across Melvich and nearby, with every bit of old sealant taken out first and a one-year guarantee.

  • Internal damp traced to a gutter joint
  • Stop ends leaking at the end of a run
  • Streaks down the brickwork from a leaking joint

Trusted gutter sealing in Melvich

How we handle gutter sealing in Melvich

It’s easy to live with a dripping gutter joint, but the water lands on the same spot every time it rains. Sealing it is quick while the gutter is still sound. We work on uPVC fascias, gutter end caps and roofline trims, and people most often call us about quick sealant fixes on gutters that didn’t last and trim joints where the sealant has failed.

External sealant needs dry surfaces, so outdoor work around Melvich is planned around the weather. Tell us how to reach each wall, gutter and roofline.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Applicator reaching up to seal an external door frame on a sunny day
Where
Melvich (KW14)
Wider area
Highland
Cover
One year on every job
Price
Quoted before any work starts
Email
info@mrmastic.co.uk
Last updated
26 October 2026

Questions from Melvich

Does the coastal weather in Melvich affect outside sealant?

Near the sea, outside joints face more wind, rain and salt than they would inland, so the choice of sealant and the preparation matter even more. It’s worth checking the walls that face the sea first.

Do you cover smaller places like Melvich?

Yes, smaller places are covered as well as towns. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.

Do you hold any approvals?

Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.

Do you guarantee gutter sealing?

Every job comes with our one-year guarantee.

Are you fully insured?

Yes. We are fully insured.

Do you take out the old sealant first?

Yes, always, and completely. New sealant will not bond properly to old, so the joint is cleaned back first.

Is gutter cleaning part of the job?

We clear what’s around the joints we work on. A full clean of the gutters is not part of it.

Can you fit new guttering?

No, we reseal joints and trims. Replacement needs a gutter installer or roofer.

What we do, step by step

There’s no need to move everything out before we come, just the space around the work. Everything nearby is protected, and the job takes an hour or two for a few joints, longer for a full run for a typical job. Around Melvich, distance and access matter more than parking. Let us know how to find you and how to reach the joints.

  1. We start by tracing the leak and checking the gutter itself is sound.
  2. We clean out the joint and take out the old sealant.
  3. The area is dried so the sealant can bond.
  4. We seal the joint with a sealant made for gutters and outdoor use.
  5. We check the run and clear any debris we find while we’re there.

Preparing for the visit

  • Let us know about earlier repairs to the joints
  • Let us know about stairs, lifts or work at height
  • Tell us about any water getting in

How to get a quote

Every job is quoted individually, so the first step is telling us about yours. Just email us at info@mrmastic.co.uk with the details, and photos are welcome.

Ask for a quote

Advice

When to call us in Melvich

Sealant laid on a wet or dirty joint fails early. Some quick repairs peel off within a season or two for this reason.

People usually contact us after spotting something like this:

  • Stop ends leaking at the end of a run
  • Internal damp traced to a gutter joint
  • Wet patches on the wall under a gutter joint
  • Gaps along fascia and soffit joints

In and around Melvich, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint.

Comparing quotes

  • When the joint can take water or movement
  • Which colour the sealant will be
  • How the joint is cleaned and prepared
  • Whether they’re fully insured

Our hiring checklist

DIY versus a professional finish

Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.

If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.

Leave it or put it right?

Leaving a leaking end cap can send water down the wall all winter. Resealing it is a quick job before the damage spreads. Exposed walls in smaller Scottish places take a lot of wind and rain, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.

We do not show prices on the website, because each job is priced on what it involves. Call for a quick quote.

What you get with us

  • 4.9 on Google from 180+ five-star reviews
  • Neat joints and a tidy finish
  • We agree the colour with you first
  • Fully insured

Read how sealant jobs are priced and customer reviews.

How to look after the new joints

Joint life depends on how it’s used and looked after. Here’s what we suggest:

  • Watch for drips in a downpour
  • Clean out the gutters once or twice a year
  • Check fascia and soffit joints for gaps
  • Do not leave a sagging gutter

If a gutter starts to sag, get the brackets looked at. If it drops, the joints will open.

Once roofline sealant splits, water can get behind it. Resealing early protects the boards.

When it isn’t the sealant

We will not take on work that won’t last, so here’s what sealant can’t put right:

  • Fascias that need replacing
  • Sagging gutters or broken brackets
  • Guttering that needs replacing

If in doubt, email us at info@mrmastic.co.uk and we will say what we think before booking.

Where we work in Melvich

  • Gutter end caps
  • Roofline trims
  • Gutter joints
  • uPVC fascias
  • Garage door frames
  • Soffit joints

Landlord and commercial work in Melvich

Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.

Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.

Outside joints around Melvich

Melvich is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on gutter, fascia and roofline joints, especially on the side facing the sea. Plenty of Scottish homes have harled walls, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface.

Whether the job is in Melvich itself or nearby, the right material for each joint matters as much as a neat finish.

Melvich (Gaelic: Meabhaich) is about 15 miles west of Thurso, in Highland. Wherever you are in the KW14 postcode area, our applicators can take on gutter sealing. Across Highland, we cover 253 places, and Melvich is one of them.

We cover every part of KW14 for gutter sealing and the streets around it. You will find streets such as Melvich Terrace and Pentland Terrace. Close by, we work in Portskerra (1 mile north-west), Strathy (3 miles west), Reay (5 miles east), Forss (11 miles east) and Am Blàran Odhar (11 miles west). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.

What’s near Melvich

Open spaces near Melvich include Loch Sgiathanach.

Map of Melvich © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job