Kent · England
Fire-rated sealant in Hunters Forstal, Kent
Specialist fire rated sealant for Hunters Forstal: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Sealant items on a fire risk assessment action list
- Open gaps behind door architraves
- Fire seals that have cracked with movement
Why it’s worth doing now in Hunters Forstal
Leaving a gap until a refurbishment comes round can mean years with it open. On its own, sealing it now is a small job. Where a wall is exposed, as many are in small places like Hunters Forstal, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote and we will talk you through it.
Why book with us
- We never seal over old sealant
- Trusted Arbo and Everbuild sealants
- Anti-fungal silicone where joints get wet
- One-year guarantee on every job
Take a look at how sealant jobs are priced or what customers say.
Fire rated sealant in Hunters Forstal, done properly
We do not assess buildings or decide what fire stopping is needed; that comes from your fire risk assessor, designer or building control. Our part is applying the specified sealant carefully, to the right depth and with the right backing. If you are dealing with seals cut through by electricians, plumbers or data installers and gaps where walls meet ceilings or slabs, we can put it right, on linear gaps, plasterboard & masonry and flats & HMOs alike.
For holiday lets, converted business premises or a community building near Hunters Forstal, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
All of our work is guaranteed for twelve months, in Hunters Forstal and everywhere else we cover.
- Place
- Hunters Forstal (CT6)
- Region
- Kent
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
What affects the cost of fire rated sealant
Jobs vary more than people expect. The main factors:
- The amount of work
- How many areas need sealing
- Any mould that needs treating
- How much old sealant there is and how hard it is to remove
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we’ll go through it with you.
What to tell us for a quote
When you call or email, it’s useful to know:
- The address or postcode of the job
- How we’d reach the joints
- If it’s domestic, commercial or a hotel
- The problem you’ve noticed
Every job is quoted individually. Simply call 0345 464 0079 or send us an email and describe the job and send pictures if you have them.
What the job involves on each surface
Service penetrations
A copper pipe, a cable and a plastic pipe can all need different fire-stopping details. We follow the manufacturer’s tested detail for each and we flag any that need another system.
Plasterboard walls
Holes in plasterboard are often cut roughly for services. Gaps that are too big for sealant alone need a different detail and we will flag it.
Questions from Hunters Forstal
Will you come out to Hunters Forstal?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you work for hotels and guest houses in Hunters Forstal?
Yes, we work for hotels as well as homes and businesses. A room-by-room programme keeps most rooms in use while the work goes on.
Is it messy?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
What does fire rated sealant cost?
We do not publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
Do I have to be there?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Can I use normal mastic around a pipe through a fire wall?
No. It might close the gap, but it is not a fire-rated seal. Use a product tested for that gap and service and we can apply it for you.
Do you certify the fire stopping?
We don’t issue ratings or certificates ourselves. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves; we install to those details and record what we did.
Do the sealants smell?
There can be a smell while the sealant cures, which fades as it sets. Opening a window helps.
Common problems we fix in Hunters Forstal
Over time, buildings change layout and use. Conversions to flats and HMOs, and office refits, create new walls and new routes for services, with gaps to match.
People normally contact us when they notice one of these:
- Gaps left after a refit or conversion
- Standard silicone or caulk in a fire-stopping gap
- Gaps where walls meet ceilings or slabs
- Door frames with gaps between frame and wall
If you look after a building such as Herne Church of England Infant School, gaps opened by contractors for new cabling are a common finding in schools and offices.
Before booking anyone
- What preparation is included
- Who turns up on the day
- Whether they’re fully insured
- How long to leave it before use
How it works
Good joint work is mostly preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. In total, it usually takes from a few hours to a few days, depending on the number of gaps and the access. For a village or hamlet like Hunters Forstal, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
How to prepare
- Mention if the joints have been sealed before
- For indoor joints, keep the area dry beforehand if you can
- Tell us if parking is tricky
Getting a quote
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work.
Read more
Fire rated sealant around Hunters Forstal
If you run a hotel, guest house or holiday let in a coastal place like Hunters Forstal, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Hunters Forstal has hotels and guest accommodation in and around it. For hotels, a room-by-room programme keeps most rooms in use while the work goes on.
Letting a property close to Herne Bay station? Then fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Community buildings like Church of St Bartholomew are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Hunters Forstal is about 1 mile south-east of Herne Bay, in Kent. Jobs in Hunters Forstal get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Hunters Forstal is one of 922 places in Kent where we work. There’s also a page for Chelmsford, about 38 miles away.
Jobs for fire rated sealant in CT6 works the same way as everywhere else we cover. Streets in the area include Mill Lane, Kingsfield Road and Hunters Forstal Road. Neighbouring places we cover for fire rated sealant include Broomfield (1 mile east), Herne (1 mile south-west), Herne Bay (1 mile north-west), Eddington (1 mile west) and Bullockstone (1 mile south-west). We also work in nearby towns such as Canterbury (6 miles south-west), Margate (11 miles east), Ramsgate (12 miles east), Broadstairs (12 miles east), Whitstable (5 miles west) and Deal (15 miles south-east).
Landmarks near Hunters Forstal
Locally, jobs take us to homes and businesses close to Herne Bay High School, The Huntsman And Horn Public House and Curtis Wood, among other places. The nearest railway station is Herne Bay station, roughly 1.1 miles north-west of the centre. Well-known places in the area include Whitstable and Tankerton Hospital (4 miles west) and Tankerton Castle (4.6 miles west). Not far away are West Blean and Thornden Woods.
What we cannot put right
Honest advice matters more to us than a booking, so here’s what sealant can’t fix:
- Openings too large for sealant, which need batts, boards or another system
- Deciding what fire stopping a building needs
- Walls or floors that weren’t built to resist fire
If you’re not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Where we work in Hunters Forstal
- Flats & HMOs
- Pipe & cable gaps
- Service penetrations
- Linear gaps
- Door frames
- Plasterboard & masonry
Places near Hunters Forstal
More services for Hunters Forstal
DIY sealant or a professional job?
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so just mention it when you contact us.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.