Kent · England
Fire-rated sealant in Bullockstone, Kent
Intumescent and fire-rated sealant around gaps, frames and service penetrations for householders, landlords and businesses in Bullockstone. Fully insured, ARBOMaster approved and guaranteed for a year.
- Old fire sealant that has split or come away
- Damaged fire sealant left by other trades
- New service routes left unsealed after building work
Commercial buildings in Bullockstone
For seaside hotels, guest houses and holiday lets around Bullockstone, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
If you look after a church, hall or community building such as Church of St Martin, service openings in its walls need the right fire-rated sealant, as in any building. For site and facilities teams at buildings such as Thornden Wood Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices.
Bullockstone is about 1 mile south-west of Herne Bay, in Kent. We carry out fire rated sealant for householders, landlords and businesses in Bullockstone, as part of our work across Kent. 922 places in Kent are on our list. Our Chelmsford page covers work nearby (38 miles or so).
Our applicators cover all of the CT6 postcode area for fire rated sealant. If you’re just outside Bullockstone, we cover Herne Common (1 mile south-east), Eddington (1 mile north-east), Herne (1 mile east), Greenhill (1 mile north-west) and Hunters Forstal (1 mile north-east). We also work in nearby towns such as Canterbury (5 miles south), Margate (12 miles east), Ramsgate (13 miles east), Broadstairs (14 miles east), Whitstable (4 miles west) and Deal (15 miles south-east).
Local landmarks in Bullockstone
In Bullockstone, that means homes and buildings near The Share And Coulter Public House, Herne Bay High School and Curtis Wood. For rail, the closest station is Herne Bay station, roughly 1 mile north. A little further out are Whitstable and Tankerton Hospital (2.9 miles west) and Tankerton Castle (3.6 miles west). Open spaces near Bullockstone include West Blean and Thornden Woods.
About our fire rated sealant in Bullockstone
We don’t assess buildings or decide what fire stopping is needed; that comes from your fire risk assessor, designer or building control. Our part is applying the specified sealant carefully, to the right depth and with the right backing. If you’re dealing with unsealed gaps around fire door frames and open joints along the top of partitions, we can put it right, whatever the surface.
For a small place like Bullockstone, the journey and timings are agreed in advance, so it can be fitted around guests, clients or events where possible.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Where
- Bullockstone (CT6)
- Region
- Kent
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Towns and villages near Bullockstone
Other services in Bullockstone
Bullockstone: your questions answered
Is Bullockstone in your area for fire rated sealant?
Yes. We work across London and the South East, and Bullockstone is part of that. Just call 0345 464 0079 or drop us an email with a few details of the job.
Is Bullockstone within the area you cover?
Yes, Bullockstone is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you carry out fire risk assessments?
No, we don’t assess buildings. Once you have a specification or action list from your assessor or designer, we will quote for the sealant work on it.
Where are you based?
Our base is in Crawley, and we work across South East England, London and Scotland.
Is there any odour?
Some sealants have a smell while they cure, which fades as it sets. Opening a window helps.
Is it messy?
We keep the work tidy. We protect what’s around the joints.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often happy for the work to be arranged.
Can you match the sealant colour?
Yes. Sealants come in white, clear, grey and other colours for many products, and we’ll agree it with you first.
When something else is needed
We will always be straight with you, so here’s what new sealant will not do:
- Large holes that need a different fire-stopping system
- Certifying a building or signing off its fire safety
- Walls or floors that weren’t built to resist fire
If you are not sure, just ring 0345 464 0079 or send us an email and we will give you a straight answer.
What we seal
- Flats & HMOs
- Linear gaps
- Door frames
- Plasterboard & masonry
- Service penetrations
- Pipe & cable gaps
Why act early in Bullockstone
Fire-rated sealants need more care than everyday sealant. How it’s installed changes how it performs, and we work to the product details every time. Older cottages and farmhouses around Bullockstone can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Combining jobs into one visit normally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. We’ll send you a clear quote for the lot.
Why Bullockstone clients choose us
- ARBOMaster approved applicator
- Anti-fungal sanitary silicone in wet areas
- 20+ years of sealant experience
- Old sealant always removed completely
Take a look at our cost guide or customer reviews.
How the job changes by surface
Door frames
Behind most architraves is a gap between frame and wall. We seal any open gap to the product’s tested details so the architrave can be refitted.
Service penetrations
Pipes, cables and ducts passing through fire-resisting walls and floors each leave a gap. We seal it with a product tested for that service and gap size.
How to look after the new joints
Once the sealant has cured, a few habits help it last:
- Don’t paint over fire sealant until it has cured
- Take photos of fire stopping before ceilings or boxing go back
- Get damaged fire seals looked at promptly
- Make resealing part of every contractor’s brief
File the record of locations and products with your fire safety paperwork. It saves time at the next inspection or assessment.
Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole.
What affects the quote in Bullockstone
We quote each job individually. These are the things that affect it:
- How much old sealant there is and how hard it is to remove
- How much there is to do
- Access and height
- The number of rooms or windows
What you pay reflects the work, not a rough estimate. That’s why we ask a few questions first and give you a clear quote before any work starts.
Helping us quote
There’s no need for technical detail. Just tell us:
- If it’s domestic, commercial or a hotel
- Whether it has been sealed before
- The problem you’ve noticed
- Access, such as stairs, a lift or height
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we will explain what’s involved.
Common problems we fix in Bullockstone
If the sealant is too shallow, has the wrong backing or sits on a dusty surface, it is not installed as tested. We see plenty of fire stopping that was hurried particularly when it was the last job before handover.
The most common problems we see are:
- Fire stopping disturbed by later work
- Standard silicone or caulk in a fire-stopping gap
- New service routes left unsealed after building work
- Linear gaps at the head of walls
For landlords with property near Herne Bay station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Before you book anyone
- Whether you can choose the colour
- Who turns up on the day
- Whether the sealant suits the joint
- How long to leave it before use
How it works
When we get to you, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. Most jobs then take from a few hours to a few days, depending on the number of gaps and the access. Somewhere like Bullockstone needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- We record what was done and flag anything that needs a different system.
Getting ready for the visit
- Let us know if you’ve seen damp or leaks
- Tell us about any previous sealing or DIY attempts
- Move anything stored near the joints
Getting a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.