Kent · England
Fire-rated sealant in Herne, Kent
Fire-stopping gaps in Herne need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Gaps filled with a product that isn’t fire-rated
- Gaps flagged on a fire risk assessment
- Unsealed gaps around fire door frames
How we handle fire rated sealant in Herne
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. Each gap is sealed to the product maker’s tested detail for its size and substrate, and we can record what went where. We work on plasterboard & masonry, service penetrations and door frames, and common reasons people get in touch are damaged fire sealant left by other trades and gaps left after a refit or conversion.
For a pub, café, guest house or shop in or near Herne, its washrooms and kitchen need the same sealant care as any big building, and fire-rated sealant around service openings should be restored after new pipes or cables go through.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Location
- Herne (CT6)
- Region
- Kent
- Cover
- 12 months on all our work
- Price
- A clear price before work begins
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
What we can’t put right
We’ll always be straight with you, so here’s what new sealant won’t do:
- Large holes that need a different fire-stopping system
- Fire doors that need new seals, closers or hardware
- Certifying a building or signing off its fire safety
If you’re not sure, just phone 0345 464 0079 or send us an email and we’ll give you a straight answer before booking.
What we seal
- Flats & HMOs
- Door frames
- Linear gaps
- Plasterboard & masonry
- Pipe & cable gaps
- Service penetrations
Herne questions
Do you cover smaller places like Herne?
Yes. Herne is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you do fire rated sealant in Herne?
Yes. Our work covers London and the South East, and Herne is part of that. You can ring 0345 464 0079 or send us an email and let us know what needs doing.
Is standard sealant good enough for a fire gap?
No. Ordinary silicone, caulk or foam is not tested as fire stopping. If it’s been used, we remove it and use the right product.
Can I do it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Can you give us a record of the work?
Yes. Every gap we seal is listed with the product used.
Are you an approved applicator?
Yes. We’re an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
Will you leave a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Do you seal gaps around fire door frames?
Yes. We often seal open gaps hidden behind the architrave. Doors, seals and closers need a door specialist.
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. Our tips:
- Include fire stopping when you schedule refits
- Include hidden areas like risers in routine checks
- Keep the record of products and locations with your fire safety documents
- Ask every contractor to reseal any fire stopping they disturb
Look at the sealed gaps as part of your routine walk-rounds. Look for cracks, gaps or sealant that has been cut or pulled out and have them put right.
When you plan work that goes through walls or ceilings, plan the fire stopping too. Catching it then saves a separate visit later.
Landlords, agents and businesses in Herne
If you manage several properties in or around Herne, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs, and photos by email help.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
What happens if it’s left?
Leaving a gap until a refurbishment comes round can mean years with it open. Sealing the gap now is a contained job on its own that does not depend on other work. Around Herne, water from a failed joint in an older home can soak into timber and plaster, and that is a much bigger job than renewing the sealant.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll explain what it covers.
Why us?
- Every job guaranteed for a year
- 4.9 on Google from 180+ five-star reviews
- An ARBOMaster approved applicator
- Arbo and Everbuild products
How it works
There isn’t much for you to do on the day. Show us the job and we will take it from there. The job generally takes anything from a few hours to several days, depending on how many gaps there are. Parking around Herne is generally easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out.
- We fit backing where needed and apply the fire-rated sealant to depth.
- We hand over a list of locations and products.
Getting ready for the visit
- Move anything stored near the joints
- Tell us about access, such as stairs, a lift or high-level joints
- For business premises, tell us about site rules or sign-in
How to get a quote
We don’t publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or send us an email.
Advice
How the job changes by surface
Masonry and concrete
Holes through concrete and block are rarely neat. We measure the gap at its widest point to make sure it suits the product.
Linear gaps
Some linear gaps have to cope with movement as well as fire. The product and depth are chosen to suit both.
Other services in Herne
How we quote for fire rated sealant
We quote each job individually. These are the things that affect it:
- Access and height
- Working hours on commercial sites
- The size of the job
- The number of rooms or windows
Leaving a failed joint generally makes the job bigger, not smaller, because water and mould keep working on it. If you’re not sure whether it needs doing, phone 0345 464 0079 or drop us an email and we will give you an honest view and a quote.
Helping us quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- The problem you’ve noticed
- Pictures of the joints, sent by email
- Roughly how big the job is
- Any previous sealing or DIY work
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
Fire rated sealant around Herne
If you run a hotel, guest house or holiday let in a coastal place like Herne, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you look after a church, hall or community building such as Church of St Martin, gaps around pipes and cables are worth checking after any building work there. Letting a property close to Herne Bay station? Then fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. For site and facilities teams at buildings such as Herne Church of England Infant School, gaps opened by contractors for new cabling are a common finding in schools and offices.
Herne is about 1 mile south of Herne Bay, in Kent. Our applicators cover fire rated sealant for householders, landlords and businesses in Herne. Across Kent, we cover 922 places, and Herne is one of them. There’s also a page for Chelmsford, roughly 39 miles from Herne.
Here we cover the CT6 postcode area for fire rated sealant. Whether your property is on St Martin's View, Ridley Close and Herne Street or anywhere close by, we can help. We also cover the places around Herne: Hunters Forstal (1 mile north-east), Eddington (1 mile north-west), Herne Common (1 mile south-west), Bullockstone (1 mile west) and Broomfield (1 mile north-east). We also work in nearby towns such as Canterbury (5 miles south-west), Margate (11 miles east), Ramsgate (12 miles east), Broadstairs (13 miles east), Whitstable (4 miles west) and Deal (15 miles south-east).
Around Herne
Typical jobs here are in homes near Curtis Wood and Herne Bay High School. For rail, the closest station is Herne Bay station, about 1.2 miles north-west. A little further out are Whitstable and Tankerton Hospital (3.7 miles west) and Tankerton Castle (4.4 miles west). For a walk, there’s West Blean and Thornden Woods.