Shetland Islands · Scotland

Fire Rated Sealant in Hillswick

Fire-stopping gaps in Hillswick need attention? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.

  • Standard silicone or caulk in a fire-stopping gap
  • Gaps where walls meet ceilings or slabs
  • Gaps flagged on a fire risk assessment

Fire rated sealant for Hillswick homes and businesses

Signs you need fire rated sealant in Hillswick

Much fire stopping is hidden: in ceiling voids, service risers and behind boxing. Out of view, damage sits unnoticed until someone inspects.

If you can see any of these, it’s time to have the joints looked at:

  • Old fire sealant that has split or come away
  • Gaps around pipes and cables through fire-resisting walls
  • Gaps left after a refit or conversion
  • Open gaps behind door architraves

Around Hillswick, as everywhere, fire rated sealant is only as good as the preparation behind it.

Questions to ask before booking

  • How the surfaces are prepared before sealing
  • How much experience the applicator has
  • Whether they’re fully insured
  • Which colour the sealant will be

How to choose a mastic man

How we handle fire rated sealant in Hillswick

Until it’s heated, intumescent sealant behaves like an ordinary sealant; in a fire it expands into the joint. Which product suits a gap depends on its width, the materials either side and what runs through it. Common call-outs are for linear gaps at the head of walls and new service routes left unsealed after building work, on service penetrations, plasterboard & masonry and pipe & cable gaps.

If you look after holiday lets, a guest house or a community building in or near Hillswick, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.

There’s a 12-month guarantee on every job, whatever its size.

Where
Hillswick (ZE2)
Region
Shetland Islands
Guarantee
One year on every job
Quote
Quoted before any work starts
Email
info@mrmastic.co.uk
Updated
26 October 2026
Eleven members of the Mr Mastic team standing in front of branded white vans

The process

On the day, we start by going over the job with you. Surfaces next to the work are protected before we start. The work generally takes from a few hours to a few days, depending on the number of gaps and the access. Outdoor work around Hillswick depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Work indoors isn’t affected.

  1. We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
  2. We measure every gap and note what it’s in and what passes through.
  3. Any non-fire-rated filler is removed and the gap cleaned.
  4. The specified fire-rated sealant goes in over any backing its detail requires.
  5. Every location is recorded with the product used for your records.

Preparing for the visit

  • Let us know about stairs, lifts or work at height
  • For business premises, tell us about site rules or sign-in
  • Let us know about parking restrictions

Ask for a quote

Asking for a quote is easy: let us know what needs doing and where and its rough size. A few pictures by email make the job easier to understand.

Get a quick quote

Related advice

Work for landlords, hotels and businesses

Failed sealant is one of the commonest items on a check-out report. Several properties can go on one quote.

Hotels need rooms back in use, so the work can be planned room by room. Hotel work is part of what we do, alongside homes and businesses.

Leave it or put it right?

Waiting for the next refit can leave a gap open for years. Sealing the gap now is a contained job on its own. Around Hillswick, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.

What it costs depends on the amount of work, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before we start, so you know where you stand.

Why book with us

  • Neat joints and a tidy finish
  • Arbo and Everbuild products
  • Domestic, commercial and hotel work
  • More than 20 years in sealant work

Read what affects the cost or our reviews.

What affects the cost of fire rated sealant

Call for a quick quote. What matters most is:

  • Working hours on commercial sites
  • The type of sealant required
  • How much old sealant there is and how hard it is to remove
  • How many rooms, windows or areas are involved

Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs. Ask us for a quote and we’ll explain what it covers.

What we need to know

What to tell us when you ask for a quote:

  • Whether it’s a home or a business
  • Any access issues, like height or stairs
  • Where the job is, and your postcode
  • Whether it has been sealed before

Want a quote for fire rated sealant? Please send an email to info@mrmastic.co.uk with a few details. We will explain what we’d do and give you a clear quote before work begins.

Your questions about fire rated sealant in Hillswick

Are the rules for fire-rated sealant different in Scotland?

Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.

Do you cover Hillswick for fire rated sealant?

Yes. Our work covers the whole of Scotland, and Hillswick is part of that. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing.

Do you work in flats, HMOs and commercial buildings?

Yes, whether the building is a school, an office, flats or an HMO, and whether it’s in use or not. Let us know the building’s hours and we will plan the work to suit.

Where is Mr Mastic based?

We work from Crawley. We cover Hillswick and the rest of the Shetland Islands, along with the rest of our area.

Can new sealant go over the old?

No, because it fails. The old sealant always comes out first, so the new joint bonds to clean surfaces.

Can you quote for more than one area?

Yes, and it often makes sense. Doing several areas at once is generally more efficient, so mention them when you ask for a quote.

What does fire rated sealant cost?

Size, access and the old material all affect the cost. Ask us for a quote and we’ll talk you through it.

Are you an approved applicator?

Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.

When something else is needed

A few problems are outside what sealant work can do:

  • Walls or floors that weren’t built to resist fire
  • Certifying a building or signing off its fire safety
  • Deciding what fire stopping a building needs

Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we’ll tell you honestly.

Surfaces we seal

  • Plasterboard & masonry
  • Linear gaps
  • Flats & HMOs
  • Pipe & cable gaps
  • Door frames
  • Service penetrations

Fire rated sealant in Hillswick: local notes

For seaside hotels, guest houses and holiday lets around Hillswick, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we don’t certify buildings or carry out fire risk assessments.

Community buildings like Northmavine Parish Church and Churchyard are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.

Hillswick is in the Shetland Islands. Whether you are in the middle of Hillswick or further out, fire rated sealant is available for homes and businesses alike, from flats and houses to offices and hotels. 63 places in the Shetland Islands are on our list, large and small.

Here we cover the ZE2 postcode area for fire rated sealant. Other places close to Hillswick include Urafirth (1 mile north-east), Braehoulland (3 miles north-west), Hogaland (4 miles east), Sullom (5 miles south-east) and Ollaberry (5 miles east). If you are somewhere remote, the job takes a little more planning, so let us know when you get in touch.

Near you in Hillswick

Typical jobs here are in homes near The Booth pub and the streets around them. Well-known places in the area include Tangwick Haa Museum (3.4 miles west). The countryside around Hillswick includes Ness-houlls Water.

Map of Hillswick © OpenStreetMap contributors

Different surfaces, different methods

Plasterboard walls

Plasterboard partitions are common in flats, offices and conversions. The sealant has to be one tested in plasterboard.

Masonry and concrete

Preparation counts on brick, block and concrete. The gap is cleaned and backed where required.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job