Orkney Islands · Scotland
Fire Rated Sealant in Greenigoe
Fire rated sealant for Greenigoe and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- Ordinary sealant used where a fire-rated product was needed
- Unsealed gaps around fire door frames
- Cracked or shrunken fire-rated sealant
What fire rated sealant looks like in Greenigoe
If you run a hotel, guest house or holiday let in a coastal place like Greenigoe, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we do not certify buildings or do fire risk assessments.
For jobs in and around Greenigoe, choosing the right material for each joint is as important as a tidy finish.
Greenigoe is about 3 miles south-west of Kirkwall, in the Orkney Islands. Anywhere in KW15, we cover fire rated sealant for homes and businesses. Across the Orkney Islands, we cover 51 places, Greenigoe among them.
Here we cover the KW15 postcode area for fire rated sealant. Close by, we work in Blackhill (2 miles north), Kirkwall (3 miles north-east), Kirbister (3 miles west), Grimbister (4 miles north-west) and Orphir (5 miles west). If you’re somewhere remote, the job takes a little more planning, so let us know when you get in touch.
Near you in Greenigoe
Nearby you’ll also find Kirkwall Castle (2.8 miles north-east) and Orkney Museum (2.8 miles north-east). For a walk, there’s Wideford Hill and Lochs of Griffyelt.
About our fire rated sealant in Greenigoe
Fire stopping only performs as intended if it’s done to the detail: correct depth, correct backing and a product suited to the surfaces. That detail is what we take care over, gap by gap. Common call-outs are for open holes round services passing through fire walls and new service routes left unsealed after building work, on flats & HMOs, plasterboard & masonry and pipe & cable gaps.
For a place like Greenigoe, the journey and timings are planned in advance, so it can be fitted around bookings or opening times where possible.
You are covered for a year from the day we finish. If there’s a problem with it, please drop us a line at info@mrmastic.co.uk.
- Location
- Greenigoe (KW15)
- Wider area
- Orkney Islands
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
How it works
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The job generally takes anything from a few hours to several days, depending on how many gaps there are. Somewhere like Greenigoe may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Locations and products are noted so you have them on file.
How to prepare
- Let us know about stairs, lifts or work at height
- On commercial sites, let us know about site rules
- Keep pets and children clear of the area while we work
Getting a quote
Want a quote for fire rated sealant? Please drop us a line at info@mrmastic.co.uk and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Related advice
Common problems we fix in Greenigoe
Gaps around door frames are easily missed. The gap between the frame and the wall is hidden behind the architrave, so it’s easy to leave unsealed when doors are changed.
Keep an eye out for any of the following:
- Linear gaps at the head of walls
- Standard silicone or caulk in a fire-stopping gap
- Holes left by a change of layout
- Unsealed gaps around fire door frames
In and around Greenigoe, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
What your quote should include
- Whether you can choose the colour
- Who turns up on the day
- What preparation is included
- Whether they seal over old material or remove it
Quotes for fire rated sealant in Greenigoe
Jobs vary more than people expect. What affects the quote:
- The size of the job
- The number of rooms or windows
- Any working-time requirements on site
- How much old sealant there is and how hard it is to remove
A failed joint rarely gets cheaper to fix by waiting. If you are not sure whether it needs doing, drop us a line at info@mrmastic.co.uk and we’ll give you an honest view and a quote.
Asking for a quote
You don’t need to know the technical terms. Just tell us:
- Where the property is
- If someone has resealed it before
- The type of property
- How we’d reach the joints
Getting a quote is simple: let us know the job and the location. A few pictures by email make the job easier to understand.
When something else is needed
Sealant isn’t the answer to every problem, and we’ll tell you before any work starts. It will not solve:
- Fire risk assessments, which need a qualified assessor
- Openings too large for sealant, which need batts, boards or another system
- Issuing a fire rating or certificate for a building
If in doubt, email us at info@mrmastic.co.uk and we’ll say what we think.
Joints and surfaces we work on
- Pipe & cable gaps
- Plasterboard & masonry
- Flats & HMOs
- Linear gaps
- Door frames
- Service penetrations
Aftercare tips
A little care helps the new joints last. Our advice:
- Do not fill fire-stopping gaps with ordinary foam or silicone
- Keep photos of seals that will be hidden
- Allow for resealing whenever new services are run
- Make resealing part of every contractor’s brief
Keep the record we give you with the building’s fire safety documents. It saves time at the next inspection or assessment.
An open gap is not only a fire issue: they also let noise, draughts and sometimes pests through. Dealing with them early helps with all of these.
DIY versus a professional finish
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Surface by surface
Service penetrations
Pipes, cables and ducts passing through fire-resisting walls and floors each leave a gap. The sealant is chosen for what passes through and how wide the gap is.
Linear gaps
A linear joint may need to allow for movement as well as fire. We choose a product and depth that suit the gap and the movement, following the tested detail.
Also in Greenigoe
Your questions about fire rated sealant in Greenigoe
How do Scotland’s building regulations apply to fire-rated sealant in Greenigoe?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Is Greenigoe in your area for fire rated sealant?
Yes. Our work covers the whole of Scotland, and Greenigoe is part of that. You can email us at info@mrmastic.co.uk and tell us what needs doing.
Does someone need to be in?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are glad to have it sorted.
Can ordinary silicone be used in a fire-stopping gap?
No. Ordinary silicone, caulk or foam isn’t tested as fire stopping. We cut it out and reseal with a fire-rated product.
Can you tell me how many minutes the seal will last?
We do not certify fire stopping or quote ratings. Our part is installing the specified product to its tested details and giving you a record of where it went.
What does fire rated sealant cost?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
Do you seal gaps around fire door frames?
Yes. The joint between frame and wall is sealed with a fire-rated sealant. The door, its seals and closer are for a door specialist.