Orkney Islands · Scotland

Fire Rated Sealant in Grimbister

Fire-stopping gaps in Grimbister need attention? We remove the old material, prepare the joints and seal them properly.

  • Standard silicone or caulk in a fire-stopping gap
  • Joints picked up in a fire-stopping survey
  • Damaged fire sealant left by other trades

Book fire rated sealant in Grimbister

Fire rated sealant in Grimbister, done properly

Door frame gaps, linear joints and holes around services all have their own details. We check the size and the substrate before choosing the product, then apply it to the depth its tested detail calls for. If you have open gaps behind door architraves and ordinary sealant used where a fire-rated product was needed, we can help, whatever the surface.

In a smaller place like Grimbister, commercial jobs are more likely to be a hotel, guest house, school, surgery or community hall than an office block. Each needs sound sealant in its washrooms and kitchens, and fire-rated joints kept in good order.

You get a 12-month guarantee, the same in Grimbister as everywhere else we work.

Mr Mastic applicators lined up beside the company vans, one holding a sealant gun
Where
Grimbister (KW15)
Wider area
Orkney Islands
Guarantee
One year on every job
Price
Quoted before any work starts
Email
info@mrmastic.co.uk
Last updated
26 October 2026

DIY sealant or a professional job?

Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.

If you’ve already had a go yourself, that’s fine. We cut it out and start again, so tell us about it when you ask for a quote.

Grimbister questions

Do you cover Grimbister for fire rated sealant?

Yes, Grimbister is within the area we cover. Our work covers the whole of Scotland. You can send an email to info@mrmastic.co.uk and tell us what needs doing.

Will you come out to Grimbister?

Yes. Grimbister is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland, including the islands, where work is planned around ferry crossings. Let us know about access, parking and anything unusual about getting there when you book.

Can I choose the sealant colour?

Yes. Sealants come in white, clear, grey and other colours, and we’ll agree it with you first.

Can you do several jobs on one visit?

Yes. Just list everything you need.

What should I tell you?

Only a few details: where it is, what you’ve noticed and how we reach it. Then drop us a line at info@mrmastic.co.uk.

Do you carry out fire risk assessments?

No. We follow the requirements from your assessor, designer or building control, and apply each product to its tested details.

Is it OK to seal over old sealant?

No. Fresh sealant does not stick to old sealant, and anything trapped underneath, including mould and water, stays there. We remove it all first.

Will the old sealant be removed?

Yes, every time. New sealant will not bond properly to old, so any old material comes out before anything new goes in.

What happens if it’s left?

Leaving a gap until a refurbishment comes round can mean years with it open. On its own, sealing it now is a small job that doesn’t depend on other work. In an older home around Grimbister, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.

Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Ask us for a quote and we’ll go through it with you.

Why Grimbister clients choose us

  • Arbo and Everbuild products
  • Fully insured
  • ARBOMaster approved applicator
  • Every job guaranteed for a year

See how sealant jobs are priced and customer reviews.

Fire rated sealant in Grimbister: local notes

For seaside hotels, guest houses and holiday lets around Grimbister, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Work on the islands has to be planned around ferry crossings and the weather, so the more notice, the better.

Whether the job is in Grimbister itself or nearby, the right material for each joint matters as much as a neat finish.

Grimbister is about 5 miles west of Kirkwall, in the Orkney Islands. Jobs in Grimbister get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Grimbister is one of 51 places in the Orkney Islands where we work for fire rated sealant.

Here we cover the KW15 postcode area for fire rated sealant. Other places close to Grimbister include Finstown (1 mile north-west), Heddle (1 mile west), Germiston (2 miles south-west), Kirbister (4 miles south) and Norseman (4 miles north). Remote and island addresses need a little more planning, so please mention your location when you email us at info@mrmastic.co.uk.

What’s near Grimbister

Nearby you’ll also find Balfour Hospital (4.9 miles east) and Kirkwall Castle (4.9 miles east). The countryside around Grimbister includes Loch of Wasdale and Hill of Heddle.

Map of Grimbister © OpenStreetMap contributors

What the job involves on each surface

Service penetrations

New gaps tend to show up where services have been added. Old or unsuitable filler comes out before the right sealant goes in over any backing the detail calls for.

Door frames

We deal with the gap around the frame, not the door. Doors, seals and closers are for a door specialist and we will mention anything we notice.

Aftercare tips

Aftercare is simple, and it makes a real difference:

  • Take pictures of fire stopping before ceilings or boxing go back
  • Do not paint over fire sealant until it has cured
  • Look in service cupboards and ceiling voids from time to time
  • Report cracked or damaged seals as soon as you notice them

Let contractors know where fire stopping has been done, and ask them to reseal anything they cut through. A lot of damaged fire stopping comes from later work.

Leave a fire-stopping gap open and smoke can move through the building much more easily. Closing it is normally a straightforward job.

What we do, step by step

Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours for a handful of gaps, and longer for a whole building, and the area is left clean. Around Grimbister, distance and access matter more than parking. Let us know how to find you and how to reach the joints, and the visit is planned around that.

  1. Before starting, we go through the specification or action list with you.
  2. We measure every gap and note what it’s in and what passes through.
  3. Any non-fire-rated filler is removed and the gap cleaned.
  4. We fit backing where needed and apply the fire-rated sealant to depth.
  5. Every location is recorded with the product used for your files.

Preparing for the visit

  • Keep children and pets away from the work area
  • Tell us about any previous sealing or DIY attempts
  • Mention any tricky access

Ask for a quote

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email photos if that’s easy.

Get a price

Read more

What we’re called out for in Grimbister

Gaps around door frames are easily missed. The gap between the frame and the wall is hidden behind the architrave, so it can be left open when a door is replaced.

People normally contact us after spotting something like this:

  • Unsealed gaps where pipes and cables go through a wall
  • Ordinary sealant used where a fire-rated product was needed
  • Fire seals that have cracked with movement
  • Holes left by a change of layout

In and around Grimbister, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.

What to look for in a quote

  • Whether VAT is included
  • How the surfaces are prepared before sealing
  • Which sealant they’ll use, and why
  • How long the guarantee is

Our hiring checklist

How we quote for fire rated sealant

Call for a quick quote. What matters most is:

  • How easy the joints are to reach
  • Any working-time requirements on site
  • The amount of work
  • Which sealant suits the joint

Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.

Helping us quote

There’s no need for technical detail. Just tell us:

  • The rough size of the job
  • Any previous sealing or DIY work
  • If it’s domestic, commercial or a hotel
  • Any access issues, like height or stairs

Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. Whenever you’re ready, email us at info@mrmastic.co.uk.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job