Surrey · England
Godstone Fire Rated Sealant
Professional fire rated sealant in and around Godstone, with every bit of old sealant taken out first.
- New service routes left unsealed after building work
- Cracked or shrunken fire-rated sealant
- Standard silicone or caulk in a fire-stopping gap
About our fire rated sealant in Godstone
Intumescent sealant looks much like any other sealant until it gets hot; in a fire it expands into the joint. The right product depends on the gap size, the substrate and what passes through, so we work to the manufacturer’s details. Typical jobs include ordinary sealant used where a fire-rated product was needed and gaps left after a refit or conversion, across linear gaps, door frames and service penetrations.
Work in a small place like Godstone is planned ahead, journey included, so the job can fit around bookings, guests or opening times where possible.
Our work is backed for twelve months, in Godstone and everywhere else we cover.
- Place
- Godstone (RH9)
- Region
- Surrey
- Cover
- A year, on every job
- Quotes
- A clear price before we start
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Fire rated sealant in Godstone: local notes
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details. There are hotels and other places to stay in and around Godstone. Hotel work can be planned room by room, with out-of-hours working where needed.
If you let a flat or house near Godstone station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. For site and facilities teams at buildings such as Godstone Village School, service openings in fire-resisting walls need checking after any refurbishment.
Godstone is about 3 miles south of Caterham, in Surrey. Across the RH9 area, our applicators can take on fire rated sealant. Across Surrey, we cover 395 places, Godstone among them. Our Crawley page covers work nearby (11 miles or so).
We work across the RH9 postcode area for fire rated sealant. If you need fire rated sealant at a property on High Street, Court Road and Godstone Green Road or a nearby road, we can help. If you’re just outside Godstone, we cover Tyler's Green (1 mile north), Church Town (1 mile east), Bletchingley (2 miles west), Tandridge (2 miles south-east) and South Godstone (2 miles south). Within a short drive, we also cover Epsom (11 miles north-west), Horley (7 miles south-west), Redhill (4 miles west), Ewell (11 miles north-west), Reigate (6 miles west) and Caterham (3 miles north).
What’s near Godstone
In Godstone, that means homes and buildings near The Hare And Hounds Public House and Bay Pond. The closest station to Godstone is Godstone station, about 2.2 miles south of the centre. A little further out are Caterham Dene Hospital (2.5 miles north) and Bletchingley Castle (1.9 miles west). Not far away are Mercers Lake and Bay Pond.
Also near Godstone
More services for Godstone
Aftercare tips
Once the sealant has cured, a few habits help it last:
- Never patch a fire seal with standard sealant
- Take pictures of fire stopping before ceilings or boxing go back
- Include hidden areas like risers in routine checks
- Check whether a sealant can be painted before decorating over it
Look at the sealed gaps as part of your routine walk-rounds. Look for cracks, gaps or sealant that has been cut or pulled out and have them put right.
Open gaps do not only matter in a fire: they also let noise, draughts and sometimes pests through. Sealing them early helps on every front.
Why act early in Godstone
An unsealed gap lets smoke and fire get round a wall that was built to hold them back. A proper seal lets the wall do its job again, and the work involved is often modest. Older cottages and farmhouses around Godstone can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Doing several joints on one visit generally makes better use of the time than several visits. We’ll give you a clear price for the lot.
Why us?
- Over 20 years’ experience
- Experience in homes, commercial sites and hotels
- 4.9 on Google from 180+ five-star reviews
- ARBOMaster approved applicator
Read how sealant jobs are priced or our reviews.
Godstone: your questions answered
I let a flat near Godstone station. Can you help?
Yes, landlords and agents are among the people we work for. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.
Do you work in hotels near Godstone?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Is it messy?
Tidy work is part of the job. We protect what’s around the joints, and the area is left clean when we finish.
Can you tell me how many minutes the seal will last?
Ratings and certificates aren’t something we issue. The performance comes from the product’s tested details and the specification from your assessor or designer.
How much does fire rated sealant cost in Godstone?
Every job is different, so each one gets its own quote. To get one, call 0345 464 0079 or drop us an email and tell us what needs doing and where.
Is there a guarantee?
Yes, for a year. If anything isn’t right with the work within the year, let us know and we will sort it.
Do you cover Godstone?
Yes. We’re based in Crawley and work across South East England, London and Scotland.
Can I use normal mastic around a pipe through a fire wall?
No. It might close the gap, but it is not a fire-rated seal. Use a product tested for that gap and service.
What we do, step by step
Once we are on site, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes a few hours for a handful of gaps, and longer for a whole building. Somewhere like Godstone needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Before starting, we go through the specification or action list with you.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out.
- We fit backing where needed and apply the fire-rated sealant to depth.
- We hand over a list of locations and products for your records.
How to prepare
- Keep pets and children clear of the area while we work
- Let us know about parking restrictions
- Clear items away from the joints we’re working on
Getting a quote
Every job is quoted individually. Simply ring 0345 464 0079 or drop us an email and describe the job, and pictures are welcome.
Read more
Signs you need fire rated sealant in Godstone
Gaps around door frames are easily missed. The gap between the frame and the wall is hidden behind the architrave, so it’s easy to leave unsealed when doors are changed.
It’s worth asking for a quote if you see:
- Open joints along the top of partitions
- Unsealed gaps around fire door frames
- Sealant items on a fire risk assessment action list
- Ordinary sealant used where a fire-rated product was needed
If you look after a church, hall or community building such as Church of St Nicholas, gaps around pipes and cables are worth checking after any building work there.
What your quote should include
- What product goes in the joint
- Whether all the old sealant comes out first
- Are they insured?
- How hidden problems are handled
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
What affects the quote in Godstone
You’ll get a clear quote before work begins. It’s based on:
- Whether the work is at height
- Any mould that needs treating
- The size of the job
- How many rooms, windows or areas are involved
The cost reflects the work involved, not a rough estimate. That is why we ask about the job first.
Helping us quote
There’s no need for technical detail. It helps if you can tell us:
- Whether it’s a home or a business
- How many joints, rooms or windows are involved
- Photos by email, if that’s easy
- Any access issues, like height or stairs
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work.
Honest limits
Some problems need a builder, plumber or other trade rather than us:
- Large holes that need a different fire-stopping system
- Problems with the door itself rather than the gap around the frame
- Assessing a building’s fire safety
If you’re not sure, just phone 0345 464 0079 or drop us an email and we will give you a straight answer.
Joints and surfaces we work on
- Flats & HMOs
- Service penetrations
- Plasterboard & masonry
- Door frames
- Pipe & cable gaps
- Linear gaps