Isle of Wight · England
Freshwater Fire Rated Sealant
Fire rated sealant for Freshwater, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Ordinary sealant used where a fire-rated product was needed
- Open gaps behind door architraves
- Cracked or shrunken fire-rated sealant
What happens if it’s left?
An open gap in a fire-resisting wall is a route for smoke and fire. Sealing it properly restores what the wall was there to do, and the sealing itself is often a contained piece of work. Homes in smaller places like Freshwater can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
What you get with us
- Neat joints and a tidy finish
- Full insurance on every job
- Anti-fungal silicone where joints get wet
- More than 20 years in sealant work
Read what affects the cost and customer reviews.
How we handle fire rated sealant in Freshwater
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. One new cable or pipe can leave a gap that nobody goes back to seal. Those are the gaps we close, using a tested fire-rated product. If you are dealing with fire stopping disturbed by later work and open gaps behind door architraves, we can put it right, on flats & HMOs, service penetrations and pipe & cable gaps alike.
Community buildings, schools and small businesses around places like Freshwater have washrooms and kitchens that see a lot of use. Their sealant and fire-rated joints are as important as those in any bigger building.
Whatever the size of the job, you get the same 12-month guarantee.
- Where
- Freshwater (PO40)
- Region
- Isle of Wight
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Common problems we fix in Freshwater
Gaps also open up as buildings move: cracked or debonded sealant leaves an open route through the wall. Damage from cleaning, knocks and maintenance adds to it.
People usually contact us when they notice something like this:
- Seals cut through by electricians, plumbers or data installers
- Unsealed gaps around fire door frames
- Ordinary sealant used where a fire-rated product was needed
- Gaps where walls meet ceilings or slabs
If you look after a church, hall or community building such as All Saints' Church, older buildings that have had new heating or wiring often have service gaps worth checking.
Before you book anyone
- Are they insured?
- How much experience the applicator has
- Whether the sealant suits the joint
- Whether all the old sealant comes out first
Places near Freshwater
What else we do in Freshwater
Common questions in Freshwater
What guarantee comes with fire rated sealant in Freshwater?
All our work, in Freshwater and everywhere else, comes with a 12-month guarantee. We are fully insured, and an ARBOMaster approved applicator.
Do you cover smaller places like Freshwater?
Yes, Freshwater is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Will it make a mess?
Very little: the area around the joints is protected first, and we tidy up before we go.
What information do you need?
Just the basics: where it is, what you’ve noticed and how we reach it. Then ring 0345 464 0079 or drop us an email.
Can you do several jobs on one visit?
Yes, and it often makes sense. Doing several areas at once is usually more efficient.
Do the sealants smell?
There can be a smell while the sealant cures, which fades as it sets. Opening a window helps.
Can tenants book the work?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
How long does the job take?
Most jobs take from a few hours to a few days, depending on the number of gaps and the access, including the preparation. We’ll confirm how long when we quote.
How it works
Every visit runs the same way: we look at the joints together, protect the area around them, carry out the job and clear up. Most jobs take anything from a few hours to several days, depending on how many gaps there are. For a job in Freshwater, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Locations and products are noted so you have them on file.
Getting ready for the visit
- Mention if the joints have been sealed before
- Let us know if you’ve seen damp or leaks
- For business premises, tell us about site rules or sign-in
How to get a quote
For fire rated sealant in Freshwater, phone 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Related advice
Workplaces and buildings in Freshwater
For seaside hotels, guest houses and holiday lets around Freshwater, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
If you look after a building such as All Saints Church of England Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices.
Freshwater is about 5 miles south of Lymington, in the Isle of Wight. Every kind of property in Freshwater can book us for fire rated sealant. The work is guaranteed for a year. Freshwater is one of 125 places in the Isle of Wight where we work for fire rated sealant. You can also see our page for Southampton, about 17 miles away.
All of PO40 is covered for fire rated sealant, from the main roads to the quietest streets. Fire rated sealant is available to properties on Dall Square, High Street and The Square and the roads around them. Close by, we work in Easton (1 mile south-east), Colwell (1 mile north-west), Norton Green (1 mile north), Afton (1 mile south-east) and Totland (1 mile west). Further out, we also cover Newport (10 miles east), Cowes (11 miles north-east), Shanklin (15 miles east), Ventnor (15 miles south-east), East Cowes (12 miles north-east) and Barton (10 miles east). If you’re somewhere remote, a little more planning is needed, so mention it when you ask for a quote.
Around Freshwater
Around Freshwater, our work takes us to homes and buildings near The Red Lion pub and the streets around them. Nearby you will also find Yarmouth Castle (1.9 miles north-east) and Ferguson Family Museum (0.7 miles north-east). For a walk, there’s Lymington and Keyhaven Marshes Nature Reserve and Afton Down.
Different surfaces, different methods
Door frames
A door can only do its job if the gap behind its frame is sealed too. We seal that gap with a fire-rated sealant suited to the frame and wall.
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. They’re sealed with a fire-rated sealant over backing where the detail calls for it.
For landlords and businesses
If you manage several properties in or around Freshwater, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we’ll give you a quote.
Keeping the joints in good condition
Looking after new joints is easy:
- Ask every contractor to reseal any fire stopping they disturb
- Check whether a sealant can be painted before decorating over it
- Plan fire stopping into any work that goes through walls or floors
- Take pictures of fire stopping before ceilings or boxing go back
Let contractors know where fire stopping has been done, and ask them to reseal anything they cut through. A lot of damaged fire stopping comes from later work.
Open gaps do not only matter in a fire: they also let noise, draughts and sometimes pests through. Dealing with them early helps with all of these.
When something else is needed
Before booking, it’s worth knowing the limits:
- Fire risk assessments, which need a qualified assessor
- Problems with the door itself rather than the gap around the frame
- Large holes that need a different fire-stopping system
Not sure which it is? You can ring 0345 464 0079 or send us an email and we will tell you honestly before booking.
Surfaces we seal
- Linear gaps
- Pipe & cable gaps
- Flats & HMOs
- Service penetrations
- Plasterboard & masonry
- Door frames