Greater London · England

Fire Rated Sealant in Forest Gate

Professional fire rated sealant in and around Forest Gate, with old sealant always removed completely and a 12-month guarantee.

  • Ordinary sealant used where a fire-rated product was needed
  • Gaps where walls meet ceilings or slabs
  • Gaps left after a refit or conversion

Fire rated sealant for Forest Gate homes and businesses

How we handle fire rated sealant in Forest Gate

A fire seal relies on being installed the way it was tested: correct depth, correct backing and a product suited to the surfaces. That’s the part we focus on, one gap at a time. We work on plasterboard & masonry, linear gaps and service penetrations, and common reasons people get in touch are ordinary sealant used where a fire-rated product was needed and fire stopping disturbed by later work.

Across London, offices, shops, hotels, student halls and blocks of flats all need sealant work from time to time, from washroom silicone to fire-rated sealant around pipes and cables passing through walls. Where a building in Forest Gate needs to stay open, work can be planned outside normal hours.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Location
Forest Gate (E7, E15, E11)
Wider area
Greater London
Guarantee
12 months on all our work
Quote
Quoted before any work starts
Phone
0345 464 0079
Last updated
26 October 2026
Mr Mastic applicators lined up beside the company vans, one holding a sealant gun

Leave it or put it right?

Paying for fire stopping that has to be redone is a false economy. Work that does not follow the tested detail may have to come out again when the building is next checked. In a London flat, a failed joint rarely stays your problem alone: water from a shower or window joint can reach the flat below, and gaps in fire-stopping matter to everyone in the building.

Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. You will know the price before we begin.

Why book with us

  • Over 20 years’ experience
  • Old sealant always removed completely
  • Quality sealants from Arbo and Everbuild
  • Anti-fungal sanitary silicone in wet areas

Read how sealant jobs are priced or what customers say.

What we’re called out for in Forest Gate

Sealant applied too thin, without the backing its detail needs, or onto dust won’t perform as it was tested. We see plenty of fire stopping that was hurried.

The most common problems we see are:

  • Open joints along the top of partitions
  • Gaps filled with a product that is not fire-rated
  • Open gaps behind door architraves
  • Fire stopping disturbed by later work

Forest Gate is in London, so parking needs planning: tell us about permits, visitor bays or off-street space when you book.

What to look for in a quote

  • When the joint can take water or movement
  • What guarantee comes with the work
  • Whether they’re fully insured
  • What product goes in the joint

How to choose a mastic man

Landlord and commercial work in Forest Gate

Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can be quoted together.

In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.

Honest limits

Before booking, it’s worth knowing the limits:

  • A wall that isn’t a fire-resisting element to begin with
  • Assessing a building’s fire safety
  • Large holes that need a different fire-stopping system

If you are not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer before booking.

What we seal

  • Linear gaps
  • Flats & HMOs
  • Plasterboard & masonry
  • Door frames
  • Pipe & cable gaps
  • Service penetrations

Fire rated sealant in Forest Gate: local notes

In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details. Many London buildings have tight access and loading restrictions, so out-of-hours working can be arranged where needed.

Letting a property close to Wanstead Park station? Then any gap left by new services in shared walls should be closed with a fire-rated product. Schools such as Woodgrange Infant School are buildings too, and service openings in fire-resisting walls need checking after any refurbishment.

Forest Gate is about 6 miles north-east of London, in Greater London. Anywhere in E7, we cover fire rated sealant for homes and businesses. 764 places in Greater London are on our list, from the larger towns to small villages. For nearby work, see our London page.

Work in E7, E15 and E11 works the same way as everywhere else we cover. We cover properties on Elm Road, Ash Road and Cary Road. Being close to the A114 and A116, Forest Gate is easy for our applicators to reach. Other places close to Forest Gate include Upton (1 mile south), Aldersbrook (1 mile north), Holloway Down (1 mile west), Plashet (1 mile south-east) and Little Ilford (1 mile east). Within a short drive, we also cover London (6 miles south-west), City of Westminster (8 miles west), Marylebone (8 miles west), Kensington (10 miles west), St Pancras (6 miles west) and Shoreditch (5 miles west).

Landmarks near Forest Gate

Typical jobs here are in homes near Tyndale Academy, Forest Gate Community School and The Hudson Bay pub, among other places. Forest Gate has its own railway station: Wanstead Park station. Other landmarks nearby include Stratford Centre (1.3 miles south-west) and Passmore Edwards Museum (0.9 miles south-west). Green spaces nearby include Hollow Pond and Old Ford Island.

Map of Forest Gate © OpenStreetMap contributors

DIY sealant or a professional job?

Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.

The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.

Forest Gate questions

Is parking a problem for a job in Forest Gate?

London parking needs a little planning, so let us know about permits, bays or a driveway when you book. The visit is then planned around what’s available.

Can you do fire rated sealant in Forest Gate?

Yes. Our work covers London and the South East, and Forest Gate is part of that. Just call 0345 464 0079 or email us with a few details of the job, and we will give you a clear quote.

Can you tell me how many minutes the seal will last?

We don’t issue ratings or certificates ourselves. The performance comes from the product’s tested details and the specification from your assessor or designer; we install to those details and record what we did.

What does intumescent mean?

An intumescent sealant expands when it gets hot, helping close the gap. It’s one type of fire-rated sealant; which product suits depends on the gap, the substrate and the service.

Can you seal over the old sealant?

No, because it fails. We remove every bit of old sealant first, so the new joint bonds to clean surfaces.

Do you seal gaps around fire door frames?

Yes. We often seal open gaps hidden behind the architrave. Doors, seals and closers need a door specialist.

Are you insured?

Yes. Full insurance covers our work.

Will there be a smell?

There can be a smell while the sealant cures, which fades as it sets. Opening a window helps.

What happens on the day

Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes from a few hours to a few days, depending on the number of gaps and the access, depending on the size of the job. Parking in much of London is by permit or pay-and-display, so it helps to know what’s near you in Forest Gate. It helps if you can point us to a visitor permit or a bay close to the door.

  1. Before starting, we go through the specification or action list with you.
  2. We measure every gap and note what it’s in and what passes through.
  3. Unsuitable material such as ordinary foam or silicone is cut out and the gap cleaned.
  4. The specified fire-rated sealant goes in over any backing its detail requires.
  5. We hand over a list of locations and products.

Getting ready for the visit

  • For indoor joints, keep the area dry beforehand if you can
  • Let us know about parking restrictions
  • Tell us about any water getting in

Getting a quote

If you’re in Forest Gate and need fire rated sealant, phone 0345 464 0079 or email us. Tell us what the problem is and where, and you will get a clear quote before we start.

Get a price

Read more

How we quote for fire rated sealant

We don’t publish a price list, because jobs vary so much. What we look at:

  • Working hours on commercial sites
  • The old material and how stubborn it is
  • The number of rooms or windows
  • The size of the job

What you pay reflects the work, not a rough estimate. That is why we ask about the job first and agree the price before starting.

What we need to know

The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:

  • Any previous sealing or DIY work
  • Any access issues, like height or stairs
  • If it’s domestic, commercial or a hotel
  • Where the property is

There’s no standard price list, because every job is different. Instead, we give you a clear quote for your job. To get started, phone 0345 464 0079 or send us an email.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job