Dumfries and Galloway · Scotland
Fire-rated sealant in Drummore, Dumfries and Galloway
Fire rated sealant across Drummore and nearby, with every bit of old sealant taken out first.
- Fire seals that have cracked with movement
- Standard silicone or caulk in a fire-stopping gap
- Unsealed gaps around fire door frames
How we handle fire rated sealant in Drummore
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. Measuring the gap and checking what it’s made of comes first, then the sealant goes in to the depth the product’s details set. If you’re dealing with old fire sealant that has split or come away and linear gaps at the head of walls, we can help, on linear gaps, pipe & cable gaps and flats & HMOs alike.
Commercial work around smaller Scottish places tends to mean hotels, guest houses, schools and halls rather than offices. All of them have washrooms, kitchens and fire-rated joints that need looking after.
Whatever the size of the job, it’s backed by our one-year guarantee.
- Location
- Drummore (DG9)
- Wider area
- Dumfries and Galloway
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Commercial buildings in Drummore
If you run a hotel, guest house or holiday let in a coastal place like Drummore, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
For buildings such as Old Parish Church and Burial-Ground, older buildings that have had new heating or wiring often have service gaps worth checking. Around Drummore, as everywhere, fire rated sealant is only as good as the preparation behind it.
Drummore is about 16 miles south of Stranraer, in Dumfries and Galloway. From the centre of Drummore to the outskirts, fire rated sealant is available for homes and businesses alike, from flats and houses to offices and hotels. Our Dumfries and Galloway coverage runs to 138 places, Drummore among them.
Jobs for fire rated sealant in DG9 is quoted and booked the same way as anywhere else. Streets in the area include Harbour Terrace, Harbour Road and Ward Place. Other places close to Drummore include Port Logan (3 miles north-west), Ardwell (6 miles north), Sandhead (9 miles north), Stoneykirk (11 miles north) and Dunragit (13 miles north).
Around Drummore
Well-known places in the area include Castle Balzieland (4.5 miles north-west). Not far away are Dunman.
Why act early in Drummore
Paying for fire stopping that has to be redone is a false economy. Work that does not follow the tested detail may have to come out again once someone inspects it. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please drop us a line at info@mrmastic.co.uk and we will talk you through it.
Why book with us
- Fully insured
- Anti-fungal sanitary silicone in wet areas
- 20+ years of sealant experience
- ARBOMaster approved applicator
See our cost guide or customer reviews.
Places near Drummore
Also in Drummore
Keeping the joints in good condition
Good habits help new joints last longer. A few tips:
- File the fire-stopping record where your assessor can find it
- Never patch a fire seal with standard sealant
- Take pictures of fire stopping before ceilings or boxing go back
- Check whether a sealant can be painted before decorating over it
Let contractors know where fire stopping has been done, and ask them to reseal anything they cut through. A lot of damaged fire stopping comes from later work.
If a fire risk assessment has flagged a gap, do not leave it for the next one. Have it sealed, then keep the record.
What happens on the day
When we arrive, we look over the joints with you first, so there are no surprises. We protect the surfaces around the joints before any work begins. The work usually takes a few hours for a handful of gaps, and longer for a whole building. In smaller Scottish places, parking is normally less of an issue than access and distance. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out and the gap cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used.
Getting ready for the visit
- Mention any tricky access
- Mention any leaks or damp you’ve noticed
- Mention if the joints have been sealed before
How to get a quote
We don’t publish a price list, because every job is different. Instead, we give you a clear price for your job. To arrange one, drop us a line at info@mrmastic.co.uk.
Advice
Different surfaces, different methods
Linear gaps
A linear joint may need to allow for movement as well as fire. We choose a product and depth that suit the gap and the movement from the manufacturer’s details.
Service penetrations
Pipes, cables and ducts passing through fire-resisting walls and floors each leave a gap. The sealant is chosen for what passes through and how wide the gap is.
Should I try it myself first?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
A DIY attempt does not rule out a professional job. We cut it out and start again.
Common questions in Drummore
Do you cover smaller places like Drummore?
Yes, Drummore is covered. Our work covers the whole of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Are the rules for fire-rated sealant different in Scotland?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Do you remove the old sealant?
Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Do you offer different sealant colours?
Yes. Sealants come in white, clear, grey and other colours for many products, and we’ll agree it with you first.
Can you do several jobs on one visit?
Yes, we can. More than one area can go on one quote.
Will there be a smell?
There can be a smell while the sealant cures. Opening a window helps.
Does someone need to be in?
We need access to the joints, so we’ll agree that with you when we book. Indoors, that generally means someone at home.
Can you give us a record of the work?
Yes. We record the locations we have sealed and the products used to keep with your fire safety documents.
When it is not the sealant
It helps to know what we can’t do:
- Assessing a building’s fire safety
- Problems with the door itself rather than the gap around the frame
- A wall that is not a fire-resisting element to begin with
If you are not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer before booking.
Surfaces we seal
- Linear gaps
- Flats & HMOs
- Pipe & cable gaps
- Service penetrations
- Door frames
- Plasterboard & masonry
What affects the cost of fire rated sealant
Call for a quick quote. The main things that affect it are:
- The amount of work
- Whether old sealant or filler has to be cut out
- The type of sealant required
- Working hours on commercial sites
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- A few pictures by email, if you can
- Whether it has been sealed before
- Where the job is, and your postcode
- What the problem is, such as mould, gaps, leaks or cracking
To get a quote, drop us a line at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You will have a clear quote before work begins.