Surrey · England
Fire-rated sealant in Dawesgreen, Surrey
Fire rated sealant for Dawesgreen and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Ordinary sealant used where a fire-rated product was needed
- Holes left by a change of layout
- Unsealed gaps around fire door frames
How the job changes by surface
Service penetrations
Pipes, cables and ducts passing through fire-resisting walls and floors each leave a gap. The sealant is chosen for what passes through and how wide the gap is.
Flats and HMOs
Flats and HMOs rely on fire separation between homes and the common parts. We work through the gaps on your assessment.
About our fire rated sealant in Dawesgreen
Bigger jobs can be worked through in stages, flat by flat or floor by floor, noting the locations and products as we go. It gives you a list to keep with the building’s fire safety documents. We work on linear gaps, door frames and plasterboard & masonry, and people most often call us about gaps where walls meet ceilings or slabs and gaps flagged on a fire risk assessment.
If you have holiday lets, a converted barn used for business or a community building near Dawesgreen, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
There’s a 12-month guarantee on every job.
- Place
- Dawesgreen (RH2)
- Wider area
- Surrey
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Landlord and commercial work in Dawesgreen
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Aftercare tips
After the cure time, these simple habits help:
- Plan fire stopping into any work that goes through walls or floors
- Check risers, ceiling voids and cupboards during building checks
- Flag any open gap you spot round a pipe or cable
- Store the list of sealed gaps with your building paperwork
File the record of locations and products with your fire safety paperwork. It helps whoever checks the building next.
Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole.
Workplaces and buildings in Dawesgreen
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
For site and facilities teams at buildings such as Burys Court School, gaps opened by contractors for new cabling are a common finding in schools and offices. Letting a property close to Betchworth station? Then any gap left by new services in shared walls should be closed with a fire-rated product. If you look after a church, hall or community building such as Church of St Bartholomew, older buildings that have had new heating or wiring often have service gaps worth checking.
Dawesgreen is about 3 miles south-west of Reigate, in Surrey. If you need fire rated sealant in Dawesgreen, it’s easy to get a quote: please ring 0345 464 0079 or email us. We’re based in Crawley and cover Surrey, Dawesgreen included. Dawesgreen is one of 395 towns and villages in Surrey we cover for fire rated sealant. There’s also a page for Crawley, roughly 7 miles from Dawesgreen.
All of RH2 is within our area for fire rated sealant, from the main roads to the quietest streets. Streets in the area include Tapner's Road and Bunce Common Road, all of which we cover. Neighbouring places we cover for fire rated sealant include Leigh (1 mile south-east), Bunce Common (1 mile west), Strood Green (1 mile north-west), Irons Bottom (2 miles east) and Brockham (2 miles north-west). Larger places within reach include Guildford (14 miles west), Epsom (9 miles north), Horley (4 miles south-east), Redhill (4 miles north-east), Ewell (10 miles north) and Reigate (3 miles north-east).
What’s near Dawesgreen
In Dawesgreen, that means homes and buildings near The Seven Stars Public House and the streets around them. The nearest railway station is Betchworth station, roughly 2.6 miles north. Well-known places in the area include East Surrey Hospital (4 miles east) and Reigate Priory Museum (2.8 miles north-east). The countryside around Dawesgreen includes Reigate Heath and Colley Hill.
Nearby places to Dawesgreen
What else we do in Dawesgreen
When something else is needed
In fairness, there are a few things sealant will not fix:
- Fire risk assessments, which need a qualified assessor
- Big openings where sealant alone isn’t the tested solution
- Issuing a fire rating or certificate for a building
If you are not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer before booking.
Where we work in Dawesgreen
- Pipe & cable gaps
- Linear gaps
- Door frames
- Service penetrations
- Flats & HMOs
- Plasterboard & masonry
Can I do it myself?
A DIY attempt does not rule out a professional job. We cut it out and start again, so just mention it when you contact us.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Why it’s worth doing now in Dawesgreen
Items left open on a fire risk assessment tend to come back at the next review. Having them sealed and recorded now gives you evidence that the item was dealt with. Around Dawesgreen, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
The cost reflects the work involved, not guesswork. That’s why we ask about the job first.
Why choose Mr Mastic in Dawesgreen
- Homes, businesses and hotels
- We’re fully insured
- Anti-fungal sanitary silicone in wet areas
- ARBOMaster approved applicator
Read our cost guide and what customers say.
What happens on the day
Most of a good job is in the preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it generally takes anything from a few hours to several days, depending on how many gaps there are. In a small place like Dawesgreen, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- We remove any old or unsuitable filler and clean the gap.
- Where the tested detail needs backing or fill, we fit it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Locations and products are noted so you have them on file.
Preparing for the visit
- Move anything stored near the joints
- Plan for the work area to be out of bounds to pets and children
- Try not to wet indoor joints just before the visit
Get a quote
Every job is quoted individually. Simply ring 0345 464 0079 or drop us an email and describe the job.
Read more
Your questions about fire rated sealant in Dawesgreen
Is Dawesgreen within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you help a landlord with a rental near Betchworth station?
Yes, we work for landlords and agents. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before we start.
Will it make a mess?
Tidy work is part of the job. Nearby surfaces are protected, and the area is left clean when we finish.
Can you do several jobs on one visit?
Yes. Just list everything you need and we will quote it together.
How long does fire rated sealant take?
As a guide, most jobs take a few hours for a handful of gaps, and longer for a whole building. Bigger jobs take longer, and we will tell you how long to expect.
Will you assess my building’s fire safety?
No, assessment isn’t something we do. When your assessor or designer has set out what’s needed, we can quote for the fire-rated sealant items.
Does someone need to be in?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you do not need to watch us work.
Can you match the sealant colour?
Most of the time, yes. We will explain which colours are available.