Fife · Scotland
Fire Rated Sealant in Crail
Problem with your fire-stopping gaps in Crail? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Fire stopping disturbed by later work
- Ordinary sealant used where a fire-rated product was needed
- Unsealed gaps where pipes and cables go through a wall
How we handle fire rated sealant in Crail
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. One new cable or pipe can leave a gap that nobody goes back to seal. We seal them with a product tested for that kind of gap. If you have gaps left after a refit or conversion and sealant items on a fire risk assessment action list, we can help, whatever the surface.
For a place like Crail, the journey and timings are planned in advance, so it can be fitted around bookings or opening times where possible.
Big or small, you get the same one-year guarantee in Crail and across Fife.
- Place
- Crail (KY10)
- Wider area
- Fife
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so the work can be planned room by room. Hotel work is part of what we do, alongside homes and businesses.
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
How it works
There’s no need to move everything out before we come, just the space around the work. Everything nearby is protected, and the job takes from a few hours to a few days, depending on the number of gaps and the access in most cases. For a place like Crail, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- We remove any old or unsuitable filler and clean the gap.
- We put in whatever backing or fill the product detail specifies.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Finally, we list where we worked and what we used, for your records.
How to prepare
- Plan for the work area to be out of bounds to pets and children
- Let us know about parking restrictions
- Let us know if you’ve seen damp or leaks
Ask for a quote
Getting a quote is simple: tell us what needs doing and where. A few photos by email make the job easier to understand, and we will take it from there.
Related advice
What affects the cost of fire rated sealant
Some jobs are bigger than they look, and some smaller. The main factors:
- Access and height
- How many areas need sealing
- Which sealant suits the joint
- The old material and how stubborn it is
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Call for a quick quote and we’ll go through it with you.
Helping us quote
There’s no need for technical detail. It helps if you can tell us:
- Any access issues, like height or stairs
- What’s wrong with the joints now
- Roughly how big the job is
- Whether it’s a home or a business
To get a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You’ll have a clear quote before any work starts.
More services for Crail
Common questions in Crail
Will you come out to Crail?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
How do Scotland’s building regulations apply to fire-rated sealant in Crail?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Will the old sealant be removed?
Always. Sealing over the old bead is the commonest cause of early failure, so we never do it.
Will we have a record of what was sealed?
Yes. When the job is done, we give you the locations and products. If you need photos or a set layout, ask when you get a quote.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often happy for the work to be arranged.
Can you fill the gap behind a fire door frame?
Yes, if the gap is within the product’s tested range. We seal the frame-to-wall gap, not the door itself, and we’ll mention anything we notice about the door.
Can you quote for more than one area?
Of course. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Where do you work from?
We’re based in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Why deal with it now?
Fire-rated sealants need more care than everyday sealant. How it’s installed changes how it performs, so we follow the maker’s details on every gap. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water behind a failed seal does the most damage when nobody’s watching.
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all play a part.
What you get with us
- 20+ years of sealant experience
- One-year guarantee on every job
- Sanitary silicone with an anti-fungal additive in wet areas
- We never seal over old sealant
Take a look at how sealant jobs are priced and customer reviews.
How the job changes by surface
Door frames
Behind most architraves is a gap between frame and wall. We seal any open gap to the product’s tested details so the architrave can be refitted.
Masonry and concrete
Holes through concrete and block are rarely neat. We check the gap size around the service to make sure it suits the product.
How to look after the new joints
Once the sealant has cured, a few habits help it last:
- Flag any open gap you spot round a pipe or cable
- Take photos of fire stopping before ceilings or boxing go back
- Look in service cupboards and ceiling voids from time to time
- Do not paint over fire sealant until it has cured
Do not drill through or remove a fire seal without putting it back properly. If you need new services through a sealed wall, plan the fire stopping as part of the job.
When you plan work that goes through walls or ceilings, plan the fire stopping too. Catching it then saves a separate visit later.
Signs you need fire rated sealant in Crail
If the sealant is too shallow, has the wrong backing or sits on a dusty surface, it isn’t installed as tested. Rushed fire stopping is common.
If you can see any of these, it’s time to have the joints looked at:
- Gaps flagged on a fire risk assessment
- Gaps filled with a product that isn’t fire-rated
- Holes left by a change of layout
- Gaps where walls meet ceilings or slabs
Around Crail, as everywhere, fire rated sealant is only as good as the preparation behind it.
Before you book anyone
- The length of the guarantee
- How the joint is cleaned and prepared
- Who does the work, and how experienced they are
- What the quote includes, VAT included or not
Fire rated sealant in Crail: local notes
If you run a hotel, guest house or holiday let in a coastal place like Crail, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
Community buildings like Parish Church Hall are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
Crail is about 17 miles south-east of Broughty Ferry, in Fife. Crail gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Crail is one of 133 places in Fife where we work for fire rated sealant. Our Dundee page covers work nearby (20 miles or so).
Postcode districts we cover here for fire rated sealant: KY10. We cover properties on High Street, Butchers Close and Bowling Green Close and the roads around them. With the A917 close by, Crail is easy for our applicators to reach. We also cover Kilrenny (3 miles south-west), Kingsbarns (3 miles north-west), Anstruther (4 miles south-west), Boarhills (5 miles north-west) and Pittenweem (5 miles south-west). We also work in nearby towns such as Leven (15 miles west), St Andrews (8 miles north-west), Cupar (15 miles west), Leuchars (13 miles north-west), Lower Largo (13 miles west) and St Monance (7 miles south-west).
Around Crail
In Crail, that means homes and buildings near Crail Parish Church and Golf Hotel. A little further out are Crail Castle (within half a mile south-east) and Crail Museum (under half a mile north-east).