Highland · Scotland
Fire-rated sealant in Corpach, Highland
Problem with your fire-stopping gaps in Corpach? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Old fire sealant that has split or come away
- Fire stopping disturbed by later work
- Gaps where walls meet ceilings or slabs
Fire rated sealant in Corpach
Fire stopping only performs as intended if it’s done to the detail: the right depth, the right backing and the right product for the substrate. That’s the part we focus on. We are often asked to deal with open gaps behind door architraves and fire stopping disturbed by later work, across pipe & cable gaps, flats & HMOs and linear gaps.
In a smaller place like Corpach, commercial jobs are more likely to be a hotel, guest house, school, surgery or community hall than an office block. All of them have washrooms, kitchens and fire-rated joints that need looking after.
The work is covered for a year after we finish. If anything isn’t right with it, send an email to info@mrmastic.co.uk.
- Place
- Corpach (PH33)
- Wider area
- Highland
- Cover
- A year, on every job
- Price
- A clear price before we start
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
How to look after the new joints
To keep the joints looking good and working properly:
- Never patch a fire seal with standard sealant
- File the fire-stopping record where your assessor can find it
- Allow for resealing whenever new services are run
- Make resealing part of every contractor’s brief
Follow the cure time we give you before decorating over the sealant. Some fire-rated sealants can be painted and some can’t, so ask us which we used.
If a fire risk assessment has flagged a gap, do not leave it for the next one. Have it sealed, then keep the record.
Signs you need fire rated sealant in Corpach
If the sealant is too shallow, has the wrong backing or sits on a dusty surface, it isn’t installed as tested. We see plenty of fire stopping that was hurried.
The most common problems we see are:
- Seals cut through by electricians, plumbers or data installers
- Unsealed gaps around fire door frames
- Gaps where walls meet ceilings or slabs
- Ordinary sealant used where a fire-rated product was needed
For site and facilities teams at buildings such as Lochaber High School, service openings in fire-resisting walls need checking after any refurbishment.
Questions to ask before you book
- Whether VAT is included
- When the joint can take water or movement
- Is the old sealant removed completely?
- What product goes in the joint
Work for landlords, hotels and businesses
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
Landlords and agents in Corpach can book us as well as homeowners. Sealant work between tenants keeps a property looking cared for before the next move-in.
How we quote for fire rated sealant
We do not publish a price list, because no two jobs are the same. The quote depends on:
- Which sealant suits the joint
- Access and height
- How much there is to do
- How many rooms, windows or areas are involved
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part, and we’ll explain the quote if you ask.
Helping us quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Access, such as stairs, a lift or height
- If it’s domestic, commercial or a hotel
- What the problem is, such as mould, gaps, leaks or cracking
- Roughly how big the job is
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we’ll explain what’s involved.
What happens on the day
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The job generally takes from a few hours to a few days, depending on the number of gaps and the access. In smaller Scottish places, parking is generally less of an issue than access and distance. Tell us how to find the property and how to reach the work.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
How to prepare
- Keep pets and children clear of the area while we work
- Let us know about earlier repairs to the joints
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
We quote each job on its own, so the first step is telling us about yours. Just drop us a line at info@mrmastic.co.uk with the details and send photos if you have them.
Related advice
Different surfaces, different methods
Linear gaps
Some linear gaps have to cope with movement as well as fire. We choose a product and depth that suit the gap and the movement.
Flats and HMOs
Converted houses often have gaps around old and new services. The gaps on your list are sealed with a fire-rated product and the locations noted.
Places near Corpach
More services for Corpach
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
What fire rated sealant looks like in Corpach
For seaside hotels, guest houses and holiday lets around Corpach, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we don’t certify buildings or carry out fire risk assessments.
For landlords with property near Corpach station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Corpach (Gaelic: A'Chorpaich) is in Highland. Our applicators cover fire rated sealant for householders, landlords and businesses in Corpach. Our Highland coverage runs to 253 places, Corpach among them. Our Glasgow page covers work nearby.
Every address in PH33 is covered for fire rated sealant, from the main roads to the quietest streets. Whether your property is on Farrow Drive, Pob's Drive and Guisach Terrace or anywhere close by, we can help. Neighbouring places we cover for fire rated sealant include Banbhaidh (1 mile east), Caol (1 mile south-east), Taobh Lochaidh (2 miles east), Inverlochy (2 miles south-east) and Fort William (2 miles south). For island and remote addresses, the job takes a little more planning.
Around Corpach
In Corpach, that means homes and buildings near Black Parks, among other places. There’s a railway station in Corpach itself: Corpach station. Other landmarks nearby include Tor Castle (2.6 miles north-east) and Treasures Of The Earth (within half a mile south-east).
Corpach: your questions answered
Do Scottish building rules affect fire-rated sealant work in Corpach?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Do you cover smaller places like Corpach?
Yes, we do. Our work covers the whole of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you do fire sealant around door frames?
Yes. We often seal open gaps hidden behind the architrave. Doors, seals and closers need a door specialist.
Will there be a smell?
There can be a smell while the sealant cures, but it fades. Opening a window helps.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Do you guarantee your work?
Yes. All our work carries our one-year guarantee.
What information do you need?
Tell us what needs doing and where, plus pictures if you have them. If we need more, we will ask.
Will you leave a mess?
Very little: the area around the joints is protected first, and we tidy up before we go.