Kent · England
Fire-rated sealant in Caring, Kent
Fire rated sealant across Caring and nearby, with every bit of old sealant taken out first.
- Cracked or shrunken fire-rated sealant
- Gaps flagged on a fire risk assessment
- Fire stopping disturbed by later work
Fire rated sealant in Caring, done properly
Bigger jobs can be worked through in stages, flat by flat or floor by floor, noting the locations and products as we go. That record is useful for your files and for whoever looks at the building next. Typical jobs include ordinary sealant used where a fire-rated product was needed and joints picked up in a fire-stopping survey, on flats & HMOs, plasterboard & masonry and door frames.
If you have holiday lets, a converted barn used for business or a community building near Caring, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
Whatever the size of the job, you get the same 12-month guarantee.
- Place
- Caring (ME17)
- Wider area
- Kent
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Landlords, agents and businesses in Caring
We regularly work with letting and managing agents. Tell us the address, the job and how access works.
Mouldy or split sealant often shows up at the end of a tenancy. Several properties can be quoted together.
Places near Caring
What else we do in Caring
Fire rated sealant in Caring: local notes
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
For site and facilities teams at buildings such as Leeds and Broomfield Church of England Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices. Rented homes near Bearsted station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. For buildings such as St Nicholas's Church, service openings in its walls need the right fire-rated sealant, as in any building.
Caring is about 3 miles east of Maidstone, in Kent. Our applicators cover fire rated sealant for householders, landlords and businesses in Caring and nearby. Caring is one of 922 towns and villages in Kent we cover. London is on our list too, around 34 miles away.
Jobs for fire rated sealant in ME17 is quoted and booked the same way as anywhere else. You will find streets such as Caring Lane and Caring Road. Nearby, we also carry out fire rated sealant in Otham (1 mile south-west), Bearsted (1 mile north-west), Langley (1 mile south), Langley Heath (1 mile south) and Willington (2 miles west). Within a short drive, we also cover Maidstone (3 miles west), Ashford (14 miles south-east), Sittingbourne (9 miles north-east), Gravesend (15 miles north-west), Tonbridge (14 miles west) and Faversham (13 miles east).
Around Caring
Locally, jobs take us to homes and businesses close to The Orchard Spot Public House. For rail, the closest station is Bearsted station, roughly 1.5 miles north-west. Nearby you’ll also find The Mall Maidstone (3.1 miles west) and Laundry Museum (1.4 miles east). Not far away are Detling Hill.
Why deal with it now?
Fire-rated sealants need more care than everyday sealant. How it’s installed changes how it performs, so we follow the maker’s details on every gap. Where a wall is exposed, as many are in small places like Caring, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Why book with us
- Arbo and Everbuild products
- 12-month guarantee on every job
- We never seal over old sealant
- Approved under the ARBOMaster scheme
Take a look at our cost guide and customer reviews.
Common questions in Caring
Do you cover smaller places like Caring?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is Caring in your area for fire rated sealant?
Yes. Our work covers London and the South East, and Caring is part of that. Just phone 0345 464 0079 or drop us an email with a few details of the job.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we will tell you what we’re using.
Can I add another job to the visit?
Yes. Just list everything you need and we will quote it together.
Is intumescent sealant the same as fire-rated sealant?
An intumescent material expands when it’s heated. Many fire-rated sealants work this way, but not all and which one is used depends on the job.
Is it messy?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Do you seal gaps around fire door frames?
Yes, if the gap is within the product’s tested range. We seal the frame-to-wall gap, not the door itself, and we’ll mention anything we notice about the door.
How much does fire rated sealant cost in Caring?
We do not publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. You’ll get a clear quote before we start.
What the job involves on each surface
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. They’re sealed with a fire-rated sealant over backing where the detail calls for it.
Plasterboard walls
We check that the board around the gap is sound. Crumbling edges are cleaned back before the sealant goes in.
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Make resealing part of every contractor’s brief
- Keep pictures of seals that will be hidden
- Ask which product was used before you paint
- Store the list of sealed gaps with your building paperwork
Any fire seal that is cut or drilled needs resealing to its tested detail. New services through a sealed wall should include fire stopping in the plan.
An open gap isn’t only a fire issue: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.
The process
Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, carry out the job and tidy away. It generally takes anything from a few hours to several days, depending on how many gaps there are. In a small place like Caring, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Preparing for the visit
- Tell us if parking is tricky
- Plan for the work area to be out of bounds to pets and children
- Try not to wet indoor joints just before the visit
Get a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. When it suits you, call 0345 464 0079 or drop us an email.
Advice
How we quote for fire rated sealant
Your quote is based on your job. We take into account:
- How much old sealant there is and how hard it is to remove
- Any mould that needs treating
- How many rooms, windows or areas are involved
- When we can work, for business premises
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are not sure whether it needs doing, ring 0345 464 0079 or email us and we will give you an honest view and a quote.
Helping us quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- Whether it’s a home or a business
- Where the property is
- How we’d reach the joints
- Any previous sealing or DIY work
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.