Scottish Borders · Scotland
Burnmouth Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Burnmouth, backed by a one-year guarantee. Call for a quick quote.
- Open holes round services passing through fire walls
- Holes left by a change of layout
- Sealant items on a fire risk assessment action list
Your questions about fire rated sealant in Burnmouth
How do Scotland’s building regulations apply to fire-rated sealant in Burnmouth?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Do you work for landlords with property near Reston station?
Yes, rental work is part of what we do. You can send an email to info@mrmastic.co.uk with the address and a few details, and we will give you a fixed price before we start.
Is it messy?
We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.
Do you come to Burnmouth?
Yes, we do. Our applicators work in Burnmouth.
Can ordinary silicone be used in a fire-stopping gap?
No. It might close the gap, but it is not a fire-rated seal. Use a product tested for that gap and service and we can apply it for you.
Are you ARBOMaster approved?
Yes. We’re approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.
Can you quote for more than one area?
Of course. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
About our fire rated sealant in Burnmouth
Deciding which gaps need fire stopping isn’t our role; that comes from your fire risk assessor, designer or building control. What we do is apply the right product to that specification, properly and neatly. We work on linear gaps, door frames and service penetrations, and common reasons people get in touch are standard silicone or caulk in a fire-stopping gap and cracked or shrunken fire-rated sealant.
For a place like Burnmouth, the journey and timings are planned in advance, so the job can fit around guests, residents or opening hours where possible.
Each job carries a 12-month guarantee, whatever its size.
- Location
- Burnmouth (TD14)
- Wider area
- Scottish Borders
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
What we do, step by step
Once we’re on site, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take anything from a few hours to several days, depending on how many gaps there are. Somewhere like Burnmouth may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- We remove any old or unsuitable filler and clean the gap.
- Where the tested detail needs backing or fill, we fit it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Locations and products are noted so you have them on file.
Before we arrive
- Keep children and pets away from the work area
- Clear the area around the work
- Let us know if you’ve seen damp or leaks
Get a quote
We do not publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, send an email to info@mrmastic.co.uk.
Read more
Workplaces and buildings in Burnmouth
For seaside hotels, guest houses and holiday lets around Burnmouth, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
If you let a flat or house near Reston station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Burnmouth is in the Scottish Borders. Every kind of property in Burnmouth is covered for fire rated sealant, old or new, large or small. Every job comes with our one-year guarantee. Burnmouth is one of 89 places in the Scottish Borders where we work. There’s also a page for Edinburgh, roughly 44 miles from Burnmouth.
Postcode districts we cover here for fire rated sealant: TD14. We cover properties on Woodbine Grove, Woodbine Drive and Lyall Terrace and the roads around them. Close by, we work in Ayton (2 miles west), Eyemouth (2 miles north), St Abbs (4 miles north-west), Coldingham (4 miles north-west) and Scottish Borders (5 miles north-west).
Local landmarks in Burnmouth
For rail, the closest station is Reston station, roughly 4.6 miles west of the centre. Well-known places in the area include Ferney Castle (4.6 miles west) and St. Mary Magdalen's Hospital (5.4 miles south-east). For a walk, there’s Ayton Hill.
Signs you need fire rated sealant in Burnmouth
If the sealant is too shallow, has the wrong backing or sits on a dusty surface, it isn’t installed as tested. We see plenty of fire stopping that was hurried.
Most people get in touch after spotting something like this:
- Unsealed gaps where pipes and cables go through a wall
- Fire seals that have cracked with movement
- Gaps left after a refit or conversion
- Door frames with gaps between frame and wall
In and around Burnmouth, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Questions to ask before booking
- How long to leave it before use
- Is the old sealant removed completely?
- What happens if the job turns out different
- What preparation is included
Aftercare tips
Good habits help new joints last longer. Our tips:
- Get damaged fire seals looked at promptly
- Ask every contractor to reseal any fire stopping they disturb
- Include hidden areas like risers in routine checks
- Never patch a fire seal with standard sealant
Keep the record we give you with the building’s fire safety documents. It saves time at the next inspection or assessment.
Any job that breaks through a wall or ceiling should include resealing. Doing it at the time avoids leaving gaps behind.
When it is not the sealant
We will not take on work that won’t last, so these are the limits:
- Fire risk assessments, which need a qualified assessor
- Sign-off of the building, which sits with building control or your assessor
- Walls or floors that weren’t built to resist fire
If in doubt, send an email to info@mrmastic.co.uk and we will say what we think before booking.
Where we work in Burnmouth
- Service penetrations
- Pipe & cable gaps
- Linear gaps
- Door frames
- Plasterboard & masonry
- Flats & HMOs
Landlords, agents and businesses in Burnmouth
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
For anyone letting property in or around Burnmouth, several properties can be quoted together. Just tell us the addresses and what each one needs.
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
What the job involves on each surface
Masonry and concrete
Holes through concrete and block are rarely neat. We check the gap size around the service against the product’s tested range.
Plasterboard walls
We check that the board around the gap is sound. Crumbling edges are cleaned back before the sealant goes in.