Dundee · Scotland
Fire Rated Sealant in Bridgefoot
Specialist fire rated sealant for Bridgefoot: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Gaps filled with a product that isn’t fire-rated
- Gaps around pipes and cables through fire-resisting walls
- Fire stopping disturbed by later work
Fire rated sealant around Bridgefoot
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. We install fire-rated sealant to the product’s tested details, though we don’t certify buildings or do fire risk assessments.
If you look after a building such as Baldragon Academy, gaps opened by contractors for new cabling are a common finding in schools and offices.
Bridgefoot is about 3 miles north-west of Dundee, in Dundee. Wherever you are in the DD3 postcode area, we cover fire rated sealant for homes and businesses. Across Dundee, we cover 50 places, and Bridgefoot is one of them.
Work in DD3 works the same way as everywhere else we cover. Whether your property is on Strathmartine Road, Parklands Place and Hillview Terrace or a nearby road, our applicators can take on the job. We also cover Strathmartine (1 mile east), Balgowan (1 mile south-east), St Marys (1 mile south), Ardler (1 mile south) and Downfield (1 mile south-east). We also work in nearby towns such as Dundee (3 miles south-east), Broughty Ferry (6 miles east), Stobswell (3 miles south-east), Monifieth (7 miles east), Blackness (3 miles south) and Barnhill (6 miles east).
Landmarks near Bridgefoot
The nearest railway station is Dundee station, roughly 3.7 miles south-east of the centre. A little further out are Tayside Medical History Museum (3.1 miles south) and Wellgate Centre (3.3 miles south-east). Open spaces near Bridgefoot include Piperdam Loch and Balgay Hill.
Fire rated sealant in Bridgefoot
Fire stopping only performs as intended if it’s done to the detail: correct depth, correct backing and a product suited to the surfaces. That detail is what we take care over. If you’re dealing with new service routes left unsealed after building work and damaged fire sealant left by other trades, we can help, whatever the surface.
For holiday lets, guest houses and community buildings in or near Bridgefoot, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Bridgefoot (DD3)
- Wider area
- Dundee
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
What else we do in Bridgefoot
What affects the cost of fire rated sealant
Your quote is based on your job. We take into account:
- The number of rooms or windows
- How easy the joints are to reach
- Mould in or behind the old joints
- Any working-time requirements on site
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Asking for a quote
Before you ask for a quote, have a think about:
- Any previous sealing or DIY work
- The type of property
- Pictures of the joints, sent by email
- Where the job is, and your postcode
Every job is quoted individually. Just drop us a line at info@mrmastic.co.uk with the details, and photos are welcome.
How to look after the new joints
Good habits help new joints last longer. A few tips:
- Photograph sealed gaps before they’re covered up
- Flag any open gap you spot round a pipe or cable
- Ask every contractor to reseal any fire stopping they disturb
- Store the list of sealed gaps with your building paperwork
Keep the record we give you with the building’s fire safety documents. It saves time at the next inspection or assessment.
If a fire risk assessment has flagged a gap, don’t leave it for the next one. Have it sealed, then keep the record so the item can be closed.
Signs you need fire rated sealant in Bridgefoot
Gaps around door frames are easily missed. The architrave hides the gap between frame and wall, so it can be left open when a door is replaced.
Signs it’s time to call us include:
- Gaps left after a refit or conversion
- Standard silicone or caulk in a fire-stopping gap
- Door frames with gaps between frame and wall
- Open joints along the top of partitions
If you let a flat or house near Dundee station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Comparing quotes
- What guarantee comes with the work
- How the colour is chosen
- How the surfaces are prepared before sealing
- Are they insured?
What the job involves on each surface
Service penetrations
New gaps tend to show up where services have been added. Old or unsuitable filler comes out before the right sealant goes in with backing where the detail needs it.
Flats and HMOs
Flats and HMOs rely on fire separation between homes and the common parts. We work through the gaps on your assessment, flat by flat if needed.
What we do, step by step
When we arrive, we start by going over the job with you, so you know exactly what we’re doing. Surfaces next to the work are protected before any work begins. The work generally takes anything from a few hours to several days, depending on how many gaps there are. Outdoor work around Bridgefoot depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Work indoors isn’t affected.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
How to prepare
- For indoor joints, keep the area dry beforehand if you can
- Let us know about stairs, lifts or work at height
- Tell us if parking is tricky
Getting a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Related advice
Honest limits
We won’t take on work that won’t last, so here’s what sealant cannot put right:
- Doors that are not fire doors in the first place
- Walls or floors that weren’t built to resist fire
- Issuing a fire rating or certificate for a building
If you’re not sure, just drop us a line at info@mrmastic.co.uk and we will give you a straight answer.
What we seal
- Plasterboard & masonry
- Linear gaps
- Door frames
- Flats & HMOs
- Pipe & cable gaps
- Service penetrations
For landlords and businesses
Housing providers, facilities teams and property managers book us too in Bridgefoot and across Dundee. Several sites can be quoted together, and we are fully insured for the work.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can be quoted together.
Bridgefoot questions
Do you cover smaller places like Bridgefoot?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Are the rules for fire-rated sealant different in Scotland?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We don’t certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Is there any odour?
It depends on the product. Some smell for a while, some hardly at all.
Is it OK to seal over old sealant?
No, it will not last. It may look fine at first, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.
Is the work guaranteed?
Yes. Every job comes with our 12-month guarantee.
Which products do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Will it make a mess?
No. The area is protected while we work and cleaned up afterwards.
Can you tell me how many minutes the seal will last?
We do not issue ratings or certificates ourselves. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves, and we install to them.