Dundee · Scotland
Fire-rated sealant in Balgowan, Dundee
Fire rated sealant for Balgowan and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Open holes round services passing through fire walls
- Unsealed gaps around fire door frames
- Seals cut through by electricians, plumbers or data installers
What sealant work can’t fix
We will not take on work that won’t last, so here’s what sealant can’t put right:
- Certifying a building or signing off its fire safety
- Big openings where sealant alone isn’t the tested solution
- Fire risk assessments, which need a qualified assessor
If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think before booking.
Joints and surfaces we work on
- Plasterboard & masonry
- Door frames
- Flats & HMOs
- Service penetrations
- Linear gaps
- Pipe & cable gaps
Fire rated sealant for homes and businesses in Balgowan
Deciding which gaps need fire stopping isn’t our role; that comes from your fire risk assessor, designer or building control. Our part is applying the specified sealant carefully, to the right depth and with the right backing. We work on door frames, flats & HMOs and linear gaps, and common reasons people get in touch are gaps where walls meet ceilings or slabs and unsealed gaps around fire door frames.
In Scotland’s cities, hotels and student accommodation need sealant work done without emptying the building, so work in Balgowan can be planned room by room, and out of hours where needed.
Each job carries a 12-month guarantee, whatever its size.
- Where
- Balgowan (DD3, DD2)
- Wider area
- Dundee
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Surface by surface
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We work along the whole run leaving no stretch unsealed.
Masonry and concrete
For masonry and concrete, we use a product tested in that substrate. We clean out dust and debris before sealing so the sealant bonds.
The process
Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it generally takes a few hours for a handful of gaps, and longer for a whole building. Inside a flat in Balgowan, the job is planned with you; outside, shared parts may need the factor or other owners involved. Tell us which applies when you book.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Old or unsuitable sealant is cut out and the gap cleaned.
- We put in whatever backing or fill the product detail specifies.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
How to prepare
- Plan for the work area to be out of bounds to pets and children
- Try not to wet indoor joints just before the visit
- For business premises, tell us about site rules or sign-in
Getting a quote
We don’t publish a price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To arrange one, email us at info@mrmastic.co.uk.
Advice
Common problems we fix in Balgowan
Gaps around door frames are easily missed. The gap between the frame and the wall is hidden behind the architrave, so it can be left open when a door is replaced.
Common reasons people contact us are:
- Ordinary sealant used where a fire-rated product was needed
- Linear gaps at the head of walls
- Seals cut through by electricians, plumbers or data installers
- Sealant items on a fire risk assessment action list
If you look after a church, hall or community building such as St Luke's Episcopal Church, gaps around pipes and cables are worth checking after any building work there.
Before you book anyone
- How long the guarantee is
- What preparation is included
- Which colour the sealant will be
- Is the old sealant removed completely?
Nearby places to Balgowan
More services for Balgowan
Commercial buildings in Balgowan
For seaside hotels, guest houses and holiday lets around Balgowan, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we don’t certify buildings or carry out fire risk assessments.
If you let a flat or house near Dundee station, any gap left by new services in shared walls should be closed with a fire-rated product. If you look after a building such as Baldragon Academy, service openings in fire-resisting walls need checking after any refurbishment.
Balgowan is about 2 miles north-west of Dundee, in Dundee. We provide fire rated sealant to homes and businesses in Balgowan and the surrounding area, as part of our work across Dundee. Balgowan is one of 50 places in Dundee where we work.
Jobs for fire rated sealant in DD3 and DD2 works the same way as everywhere else we cover. We cover properties on Cloan Road, Loftus Road and Baldovan Road. If you are just outside Balgowan, we cover Downfield (1 mile south), Claverhouse (1 mile east), Woodside (2 miles south-east), Dundee (2 miles south-east) and Mill of Mains (2 miles east). We also work in nearby towns such as Broughty Ferry (5 miles east), Monifieth (7 miles east), Blackness (3 miles south), Barnhill (6 miles east), Pitkerro (3 miles east) and Whitfield (3 miles east).
Near you in Balgowan
Around Balgowan, our work takes us to homes and buildings near Scottish School of Contemporary Dance and Cox Branch Library, among other places. The closest station to Balgowan is Dundee station, about 3 miles south of the centre. Other landmarks nearby include Strathmartine Castle (1.6 miles north-west) and Wellgate Centre (2.5 miles south-east). Green spaces nearby include Balgay Hill and Trottick Mill Ponds.
Quotes for fire rated sealant in Balgowan
Jobs vary more than people expect. The main factors:
- When we can work, for business premises
- How easy the joints are to reach
- The number and length of the joints
- Any mould that needs treating
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll go through it with you.
Asking for a quote
To make quoting easier, let us know:
- Pictures of the joints, sent by email
- If it’s domestic, commercial or a hotel
- Access, such as stairs, a lift or height
- The address or postcode of the job
Asking for a quote is easy: let us know the job and the location. Photos by email help us understand the job.
Why it’s worth doing now in Balgowan
Items left open on a fire risk assessment tend to come back at the next review. Getting them done and written up means you can show the action was taken. For landlords in Balgowan, damp and leaks can be a Repairing Standard issue, so failed sealant is best replaced before it becomes a complaint.
Combining jobs into one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.
What you get with us
- Full insurance on every job
- An ARBOMaster approved applicator
- Homes, businesses and hotels
- Any old sealant cut out fully, not covered over
Take a look at our cost guide or our reviews.
Aftercare tips
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Ask every contractor to reseal any fire stopping they disturb
- Do not fill fire-stopping gaps with ordinary foam or silicone
- Get damaged fire seals looked at promptly
- Store the list of sealed gaps with your building paperwork
Look at the sealed gaps as part of your routine walk-rounds. Watch for cracking, gaps or seals that have been disturbed and have them put right.
Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes.
Questions from Balgowan
Do Scottish building rules affect fire-rated sealant work in Balgowan?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Can you help a landlord with a rental near Dundee station?
Yes. We work for landlords and letting agents as well as homeowners, and several properties can go on one quote. You can email us at info@mrmastic.co.uk with the details for a clear quote.
Is there a guarantee?
Yes. Every job comes with a one-year guarantee.
Are you insured?
Yes. Full insurance covers our work.
Can ordinary silicone be used in a fire-stopping gap?
No. Ordinary silicone, caulk or foam is not tested as fire stopping. We cut it out and reseal with a fire-rated product.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned.
Where is Mr Mastic based?
We work from Crawley. Our applicators cover Balgowan.
Can new sealant go over the old?
No, it won’t last. It can look neat for a few weeks, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.