Argyll and Bute · Scotland
Fire Rated Sealant in Bowmore
Specialist fire rated sealant for Bowmore: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Old fire sealant that has split or come away
- Open gaps behind door architraves
- Seals cut through by electricians, plumbers or data installers
Signs you need fire rated sealant in Bowmore
Gaps around door frames are easily missed. The gap between the frame and the wall is hidden behind the architrave, so it can be left open when a door is replaced.
If you can see any of these, it’s time to have the joints looked at:
- Sealant items on a fire risk assessment action list
- Standard silicone or caulk in a fire-stopping gap
- Damaged fire sealant left by other trades
- Linear gaps at the head of walls
For jobs in and around Bowmore, choosing the right material for each joint is as important as a tidy finish.
Before you book anyone
- What the quote includes, VAT included or not
- How the colour is chosen
- How the joint is cleaned and prepared
- How long to leave it before use
Fire rated sealant for homes and businesses in Bowmore
Fire-rated sealant closes the gaps around pipes, cables and frames where they pass through a fire-resisting wall or floor. Each gap is sealed to the product maker’s tested detail for its size and substrate. If you’re dealing with gaps filled with a product that isn’t fire-rated and new service routes left unsealed after building work, we can put it right, whatever the surface.
If you look after holiday lets, a guest house or a community building in or near Bowmore, the washrooms and kitchens need the same care as any city building, and fire-rated joints should be kept in good order.
You’re covered for a year from the day we finish. If anything isn’t right with it, email us at info@mrmastic.co.uk.
- Location
- Bowmore (PA43)
- Region
- Argyll and Bute
- Guarantee
- A year, on every job
- Price
- A clear price before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What we cannot put right
New sealant can’t fix everything, and we will tell you before work begins. Sealant won’t put right:
- Issuing a fire rating or certificate for a building
- Large holes that need a different fire-stopping system
- Walls or floors that weren’t built to resist fire
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly.
Surfaces we seal
- Service penetrations
- Linear gaps
- Flats & HMOs
- Door frames
- Pipe & cable gaps
- Plasterboard & masonry
Workplaces and buildings in Bowmore
For seaside hotels, guest houses and holiday lets around Bowmore, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. We install fire-rated sealant to the product’s tested details, though we do not certify buildings or do fire risk assessments.
Around Bowmore, as everywhere, fire rated sealant is only as good as the preparation behind it.
Bowmore (Gaelic: Bogh Mòr) is in Argyll and Bute. Bowmore gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Bowmore is one of 118 places in Argyll and Bute where we work for fire rated sealant. Glasgow is on our list too, about 78 miles from Bowmore.
Every address in PA43 is covered for fire rated sealant. That includes homes and businesses on High Street, Main Street and The Square and the roads around them. Close by, we work in Port Charlotte (4 miles west), Keills (8 miles north-east), Imeraval (9 miles south), Port Askaig (9 miles north-east) and Port Ellen (10 miles south-east). For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.
Landmarks near Bowmore
Other landmarks nearby include Islay Hospital (less than half a mile east) and Museum of Islay Life (3.8 miles west). For a walk, there’s Loch Skerrols.
Questions from Bowmore
Will you come out to Bowmore?
Yes, Bowmore is covered. Our work covers the whole of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
How do Scotland’s building regulations apply to fire-rated sealant in Bowmore?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
How long does fire rated sealant take?
As a guide, most jobs take anything from a few hours to several days, depending on how many gaps there are. Bigger jobs take longer, and we’ll tell you how long to expect.
Can I choose the sealant colour?
We help you choose a colour that suits, from white and clear to greys and other shades. The choice depends on the product the joint needs.
Will you assess my building’s fire safety?
No, we don’t assess buildings. Once you have a specification or action list from your assessor or designer, we will quote for the sealant work on it.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How much does fire rated sealant cost in Bowmore?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Are you insured?
Yes. We are fully insured.
Towns and villages near Bowmore
Also in Bowmore
Different surfaces, different methods
Masonry and concrete
Preparation counts on brick, block and concrete. We brush and vacuum the gap and use backing where the detail needs it before the sealant goes in.
Flats and HMOs
Flats and HMOs rely on fire separation between homes and the common parts. We work through the gaps on your assessment.
Why deal with it now?
Waiting for the next refit can leave a gap open for years. Sealing the gap now is a contained job on its own that doesn’t depend on other work. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
We do not show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.
Why Bowmore customers choose us
- Approved under the ARBOMaster scheme
- Sanitary silicone with an anti-fungal additive in wet areas
- Domestic, commercial and hotel work
- Quality sealants from Arbo and Everbuild
Take a look at how sealant jobs are priced and what customers say.
Keeping the joints in good condition
Looking after new joints is easy:
- Keep photos of seals that will be hidden
- Plan fire stopping into any work that goes through walls or floors
- Ask every contractor to reseal any fire stopping they disturb
- Keep the record of products and locations with your fire safety documents
Do not drill through or remove a fire seal without putting it back properly. If you need new services through a sealed wall, plan the fire stopping as part of the job.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Sealing it early is a simple step to take.
DIY sealant or a professional job?
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What we do, step by step
Good joint work is mostly preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes anything from a few hours to several days, depending on how many gaps there are. Outdoor work around Bowmore depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
Before we arrive
- Tell us if parking is tricky
- Try not to wet indoor joints just before the visit
- On commercial sites, let us know about site rules
Ask for a quote
We quote each job on its own, so the first step is telling us about yours. Simply send an email to info@mrmastic.co.uk and describe the job and send photos if you have them.