Hampshire · England
Binley Fire Rated Sealant
Fire rated sealant across Binley and nearby, with every bit of old sealant taken out first and a one-year guarantee.
- Cracked or shrunken fire-rated sealant
- Door frames with gaps between frame and wall
- New service routes left unsealed after building work
Questions from Binley
I let a flat near Whitchurch (Hampshire) station. Can you help?
Yes. We work for landlords and agents as well as householders, and several properties can be quoted together. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Is Binley in your area for fire rated sealant?
Yes. Our work covers London and the South East, and Binley is part of that. You can phone 0345 464 0079 or send us an email and let us know what needs doing.
Can you tell me how many minutes the seal will last?
Ratings and certificates are not something we issue. The performance comes from the product’s tested details and the specification from your assessor or designer, and we install to them.
Where do you work from?
Mr Mastic is based in Crawley. Our applicators cover Binley.
Is it worth trying it myself?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
What sealant do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Do you guarantee your work?
Yes. All our work carries a one-year guarantee.
How long will you be here?
It depends on the size of the job, but most jobs take from a few hours to a few days, depending on the number of gaps and the access. We will give you a better idea when we quote.
About our fire rated sealant in Binley
Deciding which gaps need fire stopping is not our role; your assessor, designer or building control sets that out. What we do is apply the right product to that specification, properly and neatly. We work on plasterboard & masonry, service penetrations and door frames, and the jobs we see most are gaps around pipes and cables through fire-resisting walls and holes left by a change of layout.
For a small place like Binley, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
We stand behind the work with a 12-month guarantee, so you’re not left on your own once the job is done.
- Place
- Binley (SP11)
- Wider area
- Hampshire
- Cover
- One year on every job
- Price
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Nearby places to Binley
What else we do in Binley
Landlord and commercial work in Binley
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
What we do, step by step
A visit follows a simple pattern: we look at the joints together, protect the area around them, do the work and clear up. Most jobs take from a few hours to a few days, depending on the number of gaps and the access. In a small place like Binley, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- Where the tested detail needs backing or fill, we fit it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Finally, we list where we worked and what we used, for your records.
Getting ready for the visit
- Move anything stored near the joints
- Mention any sign-in or site rules at work premises
- Mention any leaks or damp you’ve noticed
How to get a quote
We quote each job on its own, so start by telling us what you need. Simply phone 0345 464 0079 or drop us an email and describe the job.
Advice
DIY versus a professional finish
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
How the job changes by surface
Masonry and concrete
Core-drilled and broken-out holes in concrete are often irregular. We check the gap size around the service to make sure it suits the product.
Service penetrations
A copper pipe, a cable and a plastic pipe can all need different fire-stopping details. We follow the manufacturer’s tested detail for each, and tell you if sealant alone is not the right fix.
Honest limits
We’ll always be straight with you, so here’s what sealant can’t fix:
- Doors that aren’t fire doors in the first place
- Construction that does not provide fire resistance on its own
- Large holes that need a different fire-stopping system
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly before you book.
What we seal
- Flats & HMOs
- Plasterboard & masonry
- Service penetrations
- Door frames
- Pipe & cable gaps
- Linear gaps
Workplaces and buildings in Binley
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
In and around Binley, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Binley is about 6 miles north-east of Andover, in Hampshire. Homes, rented property, offices and hotels in Binley can book us for fire rated sealant. Every job comes with our one-year guarantee. 683 places in Hampshire are on our list, from the larger towns to small villages. Our Reading page covers work nearby, about 22 miles away.
Our applicators cover all of the SP11 postcode area for fire rated sealant. We cover properties on Binley Bottom and Long Hedge Drove. We also cover the places around Binley: Wadwick (1 mile east), St Mary Bourne (2 miles south), Cole Henley (3 miles south-east), Whitchurch (4 miles south-east) and Hurstbourne Priors (4 miles south). Within a short drive, we also cover Basingstoke (13 miles east), Winchester (15 miles south), Andover (6 miles south-west), Tadley (12 miles north-east), Hyde (15 miles south) and Popley (13 miles east).
Local landmarks in Binley
The nearest railway station is Whitchurch (Hampshire) station, about 3.6 miles south-east. Well-known places in the area include Andover War Memorial Hospital (5.9 miles south-west). Open spaces near Binley include Sidown Hill.
Why it’s worth doing now in Binley
Doing it once, properly, beats doing it twice. If the details weren’t followed, the seal may need redoing when the building is next checked. Around Binley, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
We do not show prices on the website, because each job is priced on what it involves. For a quick quote, please ring 0345 464 0079 or email us.
Why choose Mr Mastic in Binley
- We are fully insured
- Experience in homes, commercial sites and hotels
- Rated 4.9 stars on Google
- A 12-month guarantee on all work
See our cost guide or our reviews.
When to call us in Binley
Sealant applied too thin, without the backing its detail needs, or onto dust won’t perform as it was tested. Rushed fire stopping is common.
Signs it’s time to call us include:
- Gaps filled with a product that isn’t fire-rated
- New service routes left unsealed after building work
- Fire seals that have cracked with movement
- Linear gaps at the head of walls
For landlords with property near Whitchurch (Hampshire) station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Before you book anyone
- What guarantee comes with the work
- What product goes in the joint
- Whether you can choose the colour
- When the joint can take water or movement