Hampshire · England
Regrouting in Binley
We cover Binley for raking out old, cracked or stained grout and regrouting tiled walls and floors. Old sealant removed completely, joints prepared properly.
- Cracked or crumbling grout lines
- Grout stained black or orange that won’t clean
- Splashback grout that has darkened
Regrouting for homes and businesses in Binley
A grout colour change can freshen a room without retiling. You might go from white to grey or back again. Tell us what you have in mind when you ask for a quote. We work on shower walls, bathroom floors and tiled floors, and common reasons people get in touch are grout stained black or orange that won’t clean and grout that’s cracking and breaking up.
Around Binley, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
A 12-month guarantee comes as standard, so you are not left on your own once the job is done.
- Place
- Binley (SP11)
- Wider area
- Hampshire
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Can I do it myself?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
How the job changes by surface
Wet rooms
In a wet room, the whole floor gets wet, so sound grout really matters. We check for loose tiles before starting.
Kitchen splashbacks
A splashback can be regrouted without touching the worktop. The joint along the worktop is resealed with silicone.
Nearby places to Binley
What else we do in Binley
Regrouting around Binley
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Whitchurch (Hampshire) station, a regrout while the flat is empty is quicker than working around a tenant.
Binley is about 6 miles north-east of Andover, in Hampshire. Our applicators cover regrouting for homeowners, landlords and businesses in Binley. Binley is one of 683 places in Hampshire where we work. Our Reading page covers work nearby.
All of SP11 is within our area for regrouting, from the main roads to the quietest streets. You will find streets such as Binley Bottom and Long Hedge Drove, and we cover them all. Other places close to Binley include Wadwick (1 mile east), St Mary Bourne (2 miles south), Cole Henley (3 miles south-east), Whitchurch (4 miles south-east) and Hurstbourne Priors (4 miles south). Further out, we also cover Basingstoke (13 miles east), Winchester (15 miles south), Andover (6 miles south-west), Tadley (12 miles north-east), Hyde (15 miles south) and Popley (13 miles east).
What’s near Binley
For rail, the closest station is Whitchurch (Hampshire) station, about 3.6 miles south-east. A little further out are Andover War Memorial Hospital (5.9 miles south-west). For a walk, there’s Sidown Hill.
What happens on the day
There is not much for you to do on the day. Point us to the joints and we’ll get on with it. The work itself takes a few hours for a shower enclosure, longer for a whole room from start to finish. Somewhere as small as Binley, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we agree what’s being done and flag any loose tiles.
- Grout is raked out without chipping the tiles.
- Dust is cleared from every joint.
- The new grout goes in, then the tile faces are cleaned.
- Internal corners and edges are resealed.
How to prepare
- Keep pets and children clear of the area while we work
- Tell us about access, such as stairs, a lift or high-level joints
- Let us know about parking restrictions
How to get a quote
Getting a quote is simple: let us know the job and the location and its rough size. A few photos by email make the job easier to understand, and we’ll take it from there.
Advice
Keeping the joints in good condition
So the new joints stay in good condition:
- Run the extractor fan during and after a shower
- Clean with a soft brush, not anything metal
- Have loose tiles looked at early
- Avoid neat bleach and strong acid descalers on grout
Leave the area unused for as long as we advise, so it cures fully. From then on, a quick rinse after showering helps and keep the room ventilated.
Fixing grout early is a small job. Left for a few years, they can become a leak so it’s worth dealing with as soon as you spot it.
When something else is needed
In fairness, there are a few things sealant won’t fix:
- Cracked or broken tiles
- A leaking wet room membrane
- A structure that flexes behind the tiles
If in doubt, call 0345 464 0079 or send us an email and we will say what we think before booking.
Surfaces we seal
- Bathroom wall tiles
- Shower walls
- Tiled floors
- Wet rooms
- Bathroom floors
- Kitchen splashbacks
Binley questions
Is Binley within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
I let a flat near Whitchurch (Hampshire) station. Can you help?
Yes, rental work is part of what we do. You can call 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before any work starts.
Can you change the grout colour?
Yes. Many clients do. A darker grout hides marks better, while lighter grout brightens a room.
Can I add another job to the visit?
Yes. More than one area can go on one quote.
What goes in the corners, grout or silicone?
We use silicone in corners and along edges. Grout in those joints cracks as the building moves.
Will there be a smell?
That depends on the sealant. Some products have a noticeable smell, others very little.
Where are you based?
Our base is in Crawley, and we work across South East England, London and Scotland.
Can new sealant go over the old?
No. The old sealant always comes out first, so the new joint bonds to clean surfaces.
For landlords and businesses
For anyone letting property in or around Binley, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs, and pictures by email help.
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Common problems we fix in Binley
Strong cleaning products and hard scrubbing slowly erode grout. Bleach and acidic limescale removers can attack it over time, leaving the joints sunken and rough.
The most common problems we see are:
- Grout stained black or orange that won’t clean
- Gaps where the shower grout has gone
- Grout that makes sound tiles look old
- Greasy, stained grout behind the hob
Around Binley, as everywhere, regrouting is only as good as the preparation behind it.
What your quote should include
- Whether you can choose the colour
- What guarantee comes with the work
- Whether the sealant suits the joint
- What happens if they find a problem under the old sealant