Scottish Borders · Scotland
Fire Rated Sealant in Ashkirk
Problem with your fire-stopping gaps in Ashkirk? We cut out the old, prepare the joints and apply the right sealant.
- Standard silicone or caulk in a fire-stopping gap
- New service routes left unsealed after building work
- Cracked or shrunken fire-rated sealant
Fire rated sealant around Ashkirk
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details, though we don’t certify buildings or do fire risk assessments.
Community buildings like Ashkirk Parish Church are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking. Around Ashkirk, as everywhere, fire rated sealant is only as good as the preparation behind it.
Ashkirk is about 5 miles north-west of Hawick, in the Scottish Borders. Every kind of property in Ashkirk is covered for fire rated sealant. Every job comes with our 12-month guarantee. 89 places in the Scottish Borders are on our list, from the larger towns to small villages. Our Edinburgh page covers work nearby, about 34 miles away.
Here we cover the TD7 postcode area for fire rated sealant. You’ll find streets such as Crans Field Drive and The Glebe, and we cover them all. Close by, we work in Woll (1 mile south-west), Selkirk (4 miles north), Lilliesleaf (4 miles north-east), Stirches (4 miles south-east) and Midlem (5 miles north-east). Further out, we also cover Galashiels (8 miles north), Hawick (5 miles south-east), Jedburgh (11 miles east), Wilton (5 miles south), Innerleithen (12 miles north-west) and Melrose (9 miles north-east).
What’s near Ashkirk
A little further out are Halliwells House Museum (3.7 miles north) and Hawick Community Hospital (5.1 miles south). For a walk, there’s Headshaw Loch and Ashkirk Hill.
Fire rated sealant in Ashkirk
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. One new cable or pipe can leave a gap that nobody goes back to seal. Those are the gaps we close, using a tested fire-rated product. We work on pipe & cable gaps, linear gaps and service penetrations, and the jobs we see most are unsealed gaps where pipes and cables go through a wall and gaps filled with a product that isn’t fire-rated.
Work in a place like Ashkirk is planned ahead, journey included, so it can be fitted around bookings or opening times where possible.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we will put it right.
- Place
- Ashkirk (TD7)
- Region
- Scottish Borders
- Cover
- A year, on every job
- Quote
- A clear price before we start
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Why act early in Ashkirk
If an assessor has flagged gaps, it makes sense to close them before the next review. Getting them done and written up means you can show the action was taken. Around Ashkirk, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You’ll know the price before we begin.
Why Ashkirk customers choose us
- Anti-fungal silicone where joints get wet
- Domestic, commercial and hotel work
- An ARBOMaster approved applicator
- We’re fully insured
Read our cost guide or customer reviews.
For landlords and businesses
We work for letting agents and landlords as well as householders. Resealing between tenancies keeps a property looking cared for before the next move-in.
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
Surface by surface
Door frames
The gap between a door frame and the wall around it needs sealing as well as the door itself. We fill it with a fire-rated product suited to the materials either side.
Flats and HMOs
Converted houses often have gaps around old and new services. The gaps on your list are sealed with a fire-rated product and record where they are.
The process
Every visit runs the same way: we look at the joints together, protect the area around them, carry out the job and tidy away. Most jobs take a few hours for a handful of gaps, and longer for a whole building. For a place like Ashkirk, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- We put in whatever backing or fill the product detail specifies.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Getting ready for the visit
- Tell us about any water getting in
- Let us know about parking restrictions
- Clear items away from the joints we’re working on
Get a quote
To get a quote, send an email to info@mrmastic.co.uk with the location and a short description of the problem. You’ll have a clear quote before work begins.
Related advice
Your questions about fire rated sealant in Ashkirk
Can you do fire rated sealant in Ashkirk?
Yes, Ashkirk is within the area we cover. We work across all of Scotland. You can email us at info@mrmastic.co.uk and tell us what needs doing, and we will give you a clear price.
Is Ashkirk within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done and we’ll quote it together.
How much does fire rated sealant cost in Ashkirk?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before work begins.
Will you leave a mess?
Not at all. The area is protected while we work and cleaned up afterwards.
Do you guarantee your work?
Yes. Every job comes with our one-year guarantee.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Is intumescent sealant the same as fire-rated sealant?
An intumescent sealant expands when it gets hot to help seal the gap. It’s one type of fire-rated sealant; the right one depends on the gap and what passes through it.
What affects the cost of fire rated sealant
We do not publish a price list, because jobs vary so much. The quote depends on:
- The type of sealant required
- Whether there’s mould to deal with
- The amount of work
- Whether old sealant or filler has to be cut out
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Ask us for a quote and we will go through it with you.
Asking for a quote
You do not need to know the technical terms. Just tell us:
- The address or postcode of the job
- What’s wrong with the joints now
- If it’s domestic, commercial or a hotel
- Any previous sealing or DIY work
If you are in Ashkirk and need fire rated sealant, drop us a line at info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and you’ll get a clear quote before any work starts.
What sealant work cannot fix
New sealant can’t fix everything, and we’d rather say so up front. Sealant will not put right:
- Walls or floors that weren’t built to resist fire
- Problems with the door itself rather than the gap around the frame
- Openings too large for sealant, which need batts, boards or another system
If in doubt, send an email to info@mrmastic.co.uk and we will say what we think.
What we seal
- Linear gaps
- Service penetrations
- Door frames
- Flats & HMOs
- Pipe & cable gaps
- Plasterboard & masonry
Other services in Ashkirk
Looking after it afterwards
A little care helps the new joints last. Our advice:
- Never patch a fire seal with standard sealant
- Allow for resealing whenever new services are run
- Photograph sealed gaps before they’re covered up
- Ask every contractor to reseal any fire stopping they disturb
Don’t drill through or remove a fire seal without putting it back properly. If you need new services through a sealed wall, plan the fire stopping as part of the job.
It’s easiest to seal gaps while they’re few and easy to reach. Leave them and each new job adds another hole and the list grows.